Simplify volatiles analysis (Part 1): Why adopt direct MS in your lab or CRO?

Sample throughput is often a critical bottleneck for the analysis of volatiles in contract testing or research laboratories. Selected ion flow tube mass spectrometry (SIFT-MS) is a form of direct mass spectrometry that provides real-time detection of volatile organic compounds and many inorganic gases to sub-part-per-billion concentrations (by volume; ppbV) without preconcentration, derivatization or drying. Automation of SIFT-MS creates a high-throughput analytical tool that addresses these throughput challenges.

Join the first of four webinars, on Tuesday, September 15, to hear Dr. Mark Perkins, Senior Applications Chemist at Anatune Limited, and Dr. Vaughan Langford, Principle Scientist at Syft Technologies, demonstrate the advantages of automated SIFT-MS for volatiles analysis in diverse matrices. Find out why SIFT-MS is not only advantageous for throughput reasons, but also for how it can also support faster method optimization for conventional methods (e.g., headspace equilibration times).

Subsequent webinars in this series build on these basic advantages of SIFT-MS, showing practical, proven strategies for adopting automated SIFT-MS in your routine analysis workflow.

Key learning objectives:

• The analytical challenges of volatiles analysis faced by laboratories that are using only chromatographic methods
• How the challenges of volatiles analysis can be addressed using direct MS, which provides higher sample throughputs, faster method development and validation, and improved analysis of challenging volatiles such as formaldehyde and hydrogen sulfide
• How the direct MS technique – SIFT-MS – works
• How SIFT-MS analysis can be automated across a wide range of lab applications, such as headspace analysis, sample bags, and thermal desorption tubes.

Who should attend:

• Laboratory managers and analysts in routine industrial and contract testing and research laboratories, particularly those working with the analysis of volatiles
• Laboratory managers and analysts in pharmaceutical, biomedical, industrial, consumer product, and environmental laboratories

This webinar will run on Tuesday, September 15, at:

• 16:00 BST
• 17:00 CEST
• 08:00 PDT
• 11:00 EDT

Register for this webinar here>>

This webinar is part one of a four part series on SIFT-MS technology, more information on this webinar series can be found here>>