AT1000 Potentiometric Titrator with 1 Burette
Simply add your sample, press the button and read your titration results.
The supplier does not provide quotations for this product through SelectScience. You can search for similar products in our Product Directory.
Titration
Great instrument easy to use
Review Date: 31 Jul 2022 | Hach Company
Used for titration process
A burette is a lab equipment which is used to perform titration. It's easy to use as it is placed vertically with the help of a holder under which a flask is kept. It needs to be handled with care of made of glass. Also it needs to be properly washed before and after use.
Review Date: 28 Jul 2022 | Hach Company
Titration in lab
Very effective at iodimetric titration.
Review Date: 22 Jul 2022 | Hach Company
Lab
It is extremely easy to use and it is helping me with my science experiments.
Review Date: 31 Mar 2022 | Hach Company
Low level residual chlorine in wastewater effluent
Hach has a reputation for durability and ease of use. The AT1000 automatic titrator lives up to this. We use version AT1122.97 set up for low level residual chlorine in final waste water effluent. The amperometric titiration is accurate and the reagents are handled with almost no thought. There are not many options for 0.01 to 0.05 mg/l chlorine analysis but Hach in my opinion has the best and easiest to operate unit. The operators think this unit is a godsend. Note: In humid environments stopper the KI dispenser when not in use to reduce caking.
Review Date: 2 Jul 2020 | Hach Company
CI2
It is easy to use but the results are sometimes not accurate. No results show up sometimes because calibration is not good/accurate. The response of the instrument is not accurate.
Review Date: 12 Mar 2020 | Hach Company
The AT1102 model is an accurate, reliable and easy to use instrument for performing titrations in the laboratory. This titrator was designed in Germany as part of the Hach Titralab® AT1000 family of automatic titrators and includes one burette and two measurement inputs. The titrator is delivered preassembled for easy installation and does not require complex programming like other titration systems on the market. This system offers superb dependability so you don’t suffer from downtime and it is easy to use for all skill levels, reducing operator training and process time. In fact, with an autotitrator the operator will be able to begin preparing the next sample while the instrument is performing the current measurement, thus improving lab throughput. More importantly however, the automatic titrator eliminates manual processes and operator interpretation, significantly improving accuracy and reliability so you can trust your measurements from day to day. If you perform any of the titrations listed in the Application Packs section below this is the instrument for you!
Application Packs
The AT1102 instrument can be used with the following Hach Application Packs:
- pH & Alkalinity in Water (Hach p/n AP0001.AT1102)
- pH/Alkalinity & Conductivity (Hach p/n AP0002.AT1102)
- FOS/TAC - Volatile Acids & Alkalinity in Biogas (Hach p/n AP0006.AT1102)
- pH & Total Acidity in Wine & Juices (Hach p/n AP0008.AT1102)
- TAN (Hach p/n AP0015.AT1102)
- TBN (Hach p/n AP0016.AT1102)
- BR₂/I₂ Number (Hach p/n AP0018.AT1102)
Each application pack includes a pre-programmed application that runs on the instrument as well as a set of accessories necessary to perform your titrations. Please review the specific webpage for each application pack for further details, and we suggest selecting your Application Pack before your instrument. If you haven’t found the application pack that meets your needs on this page please enter “AT1000 Application Pack” in the search field, hit enter and then click on the “PRODUCT FAMILY: AT1000 Application Packs” to see the full list of Hach’s AT1000 Application Packs.