Bond Elut LMS polymeric sorbent lets you elute without having to add amine modifiers, buffers, or acids. The elimination of secondary interactions means that elution of analytes can be achieved with pure organic solvents or HPLC mobile phase-compatible solvent mixtures of low ionic strength. These characteristics are crucial to allow compatibility with LC/MS or other delicate analytical techniques.
Bond Elut Mycotoxin is a novel sorbent which cleans up food extracts for improved trichothecene and zearalenon analysis. Results are comparable or superior to competing methods, including immunoaffinity columns (IAC) and charcoal/alumina column. The sorbent is a proprietary silica-based ion exchange material.
Bond Elut NEXUS is an ultra-clean polymeric sorbent, which has bimodal porosity and a high surface area. NEXUS offers a nonpolar retention mechanism with no preconditioning required. NEXUS WCX is a weak cation-exchange sorbent that offers extra selectivity for analytes such as quaternary ammonium drugs and anabolic steroids.
Bond Elut NH2 is a weaker anion exchanger than sorbents such as SAX (a quaternary amine sorbent that is always charged), and is therefore a better choice for retention of very strong anions, such as sulfonic acids, which may retain irreversibly on a SAX sorbent. Similar to Diol an SI sorbents, Bond Elut NH2 is excellent for the separation of structural isomers.
Bond Elut PBA is a unique silica SPE sorbent containing a phenylboronic acid functionality that can retain analytes through a reversible covalent bond. This very strong covalent retention mechanism enables high specificity and cleanliness. The boronate group has a strong affinity for cis-diol containing compounds, such as catechols, nucleic acids, some proteins, carbohydrates, and PEG compounds.
Bond Elut PCB is a specially designed sorbent that allows for the facile extraction of polychlorinated biphenyl (PCB) compounds from various matrices. Desired analytes can be loaded and eluted using a simple, single solvent method before analysis by GC/ECD.
Bond Elut PH is a nonpolar bonded silica material, which exhibits a different selectivity to alkyl or aliphatic functionalized phases, such as C8 or cyclohexyl. The electron density present in the aromatic ring affords an enhancement in the retention of conjugated or aromatic ring-containing analytes due to desirable pi-pi interactions.
Bond Elut Plexa PAX sets the new performance standard in analyte cleanup and reproducibility for polar and non-polar acidic analytes. Existing polymeric anion-exchange sorbents can exhibit a broad range of ion exchange capacity from batch to batch. This leads to nonreproducible methods and compromised data.
Bond Elut PPL is a styrene-divinylbenzene (SDVB) polymer that has been modified with a proprietary nonpolar surface. PPL will retain even the most polar classes of analytes, including phenols. The large particle size allows ease of flow for viscous or particulate-rich water samples, while the high surface area and strong hydrophobicity ensure reproducible extractions with high recoveries upon elution.
Bond Elut SAX is a strong anion-exchange sorbent ideally suited for the extraction of compounds, such as carboxylic acids, which may not retain effectively on weak anion-exchange sorbents.
Bond Elut SCX is a strong cation exchanger with a very low pKa. Although the pKa is similar to Bond Elut PRS, the presence of the benzene ring in the functional group increases the potential for nonpolar interactions. This nonpolar characteristic becomes particularly important when conducting ion exchange from aqueous systems, where selectivity towards compounds exhibiting cationic and nonpolar character is seen.
Native silica is generally regarded as the most polar SPE sorbent available. Bond Elut SI is particularly effective at separating compounds with a very similar structure. Applying the analytes in a non-polar solvent, then increasing the solvent polarity by increasing the concentration of a polar modifier, such as THF or ethyl acetate, delivers effective separations.
Simplify sodium sulfate mediated drying steps by using cartridges prepacked with ACS grade, granular anhydrous sodium sulfate. Available in three formats (LRC, Bond Elut Jr, and straight barrels).
The same Bondesil sorbent packed into the industry-leading Bond Elut cartridges is available in bulk for large-scale purification or packing custom cartridges.
Chem Elut is an economical Supported Liquid Extraction choice, available in buffered and unbuffered configurations. Agilent SLE products use a broad-performance inert diatomaceous earth sorbent for rapid, general sample preparation
Empore extraction disks provide a high flow rate solution for large volume sample preparation, and are available in a variety of bonded phases. The Empore disks are available in two diameters, 47 and 90 mm. By increasing the diameter of the disk used, the disk surface area available for sample passage increases, resulting in better solvent flow rates through the disk.
EnvirElut sorbents are specially designed for the extraction of a wide range of compounds from aqueous matrices. EnvirElut herbicides, PAHs, and pesticides are available in standard SPE straight barrel cartridges, which can be used on conventional Vac Elut vacuum manifolds.
Hydromatrix is a high purity, inert diatomaceous earth sorbent available as bulk material, offering end user flexibility and an excellent diversity of applications.
For Independent Flow Control Luer stopcocks are used to provide independent flow control of each individual Bond Elut cartridge when used in conjunction with vacuum manifolds. They are made from solvent resistant high-grade polypropylene, are reusable and can be readily cleaned using organic solvents such as methanol or acetone.
Mega Bond Elut Flash cartridges offer excellent levels of performance and productivity for the purification of organic compounds, but also for scale-up, solid phase extraction. Prepacked, disposable cartridges offer greater convenience than glass columns that must be washed, dried, and repacked after every sample.
Bond Elut SPEC is a monolithic sorbent bed manufactured with ultraclean polypropylene plastic and bonded-silica impregnated on a glass fiber disc, resulting in an SPE product that delivers faster sample processing and lower costs.
Process up to 20 Bond Elut Cartridges at the Same Time Engineered to increase laboratory productivity, the corrosion-resistant Vac Elut 20 allows simultaneous processing of up to 20 Bond Elut cartridges. The manifolds clear glass base allows careful monitoring of the entire sample collection process. Its compact, linear design requires very little bench space.
For Larger Elution Volumes The Vac Elut 20 with a large glass basin and collection rack accommodates larger 16 x 150 mm test tubes. The same high quality material and features on the standard Vac Elut system are incorporated on this special unit. These collection vessels can be utilized in combinatorial chemistry applications using large boiling tubes for collection of purified synthesis mixtures, or for any SPE extractio…
Process up to 24 SPE Cartridges at the Same Time The Vac Elut SPS 24 allows you to process up to 24 SPE cartridges simultaneously. Like all Vac Elut manifolds, the SPS 24 is made from durable, solvent-resistant materials and engineered to last. The glass sides allow easy viewing of the entire sample collection process.
Manifolds and Accessories Agilent manifolds and accessories complement the quality of SampliQ sorbents. Flexible configurations and availability as complete assemblies or individual components mean that the user has the necessary capability at any stage from method development to high-throughput operation. A full selection of adapters allows stacking cartridges for multi-step separation of or use of flexible cartridges on 12…
