Agilent Technologies Products & Reviews

The 1290 Infinity II Preparative Open-Bed Sampler/Collector is the solution for automated, high-capacity management of sample injection and fraction collection in semipreparative and preparative-scale LC purification workflows. The X-Z-theta axis probe uses novel robotic technology to minimize sample carryover during movements between fraction containers. Sample volumes can be injected from microtiter plates, vials, or vessels…

The 1260 Infinity II Multisampler is a multipurpose autosampler that handles vials and microplates. Injecting at pressures up to 600 or 800 bar, the Multisampler is a compact module with a capacity of up to 6,144 samples, all within the footprint of an Agilent LC stack.

The 1260 Infinity II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 600 or 800 bar.

The 1260 Infinity II Bio-Inert Multisampler injects samples from microplate and vial at pressures up to 600 bar. It is a compact module offering a capacity of up to 6,144 samples. With its multiwash capability, you can reduce carryover to less than 9 ppm.

The 1260 Infinity II SFC Multisampler is a high-capacity autosampler for supercritical fluid chromatography, bringing LC-like injection precision and reproducibility to SFC. The Multisampler's wide injection range supports flexible injection volumes from 0.1 to 90 µL without changing sample loops.

The 1260 Infinity II Manual Preparative Injector is ideal for routine purification of milligram and multigram quantities at flows up to 200 mL/min and pressures up to 600 bar. Modular sample loops in various sizes up to 20 mL volume allow application in many different purification workflows.

The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lenghts are supported.

The 1260 Infinity II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with larger inside diameters for small-scale preparative applications are possible.

The 1260 Infinity II Preparative Valve-Based Fraction Collector is a compact, full-featured fraction collector for daily compound isolation and purification by LC. Optimized for collection of up to 11 high-volume fractions its versatile design allows operation in both routine sample purification workflows and recovery applications. The built-in fraction delay sensor allows precise and automatic calibration of the fraction coll…

The 1290 Infinity II Preparative Open-Bed Fraction Collector is our most versatile fraction collector, enabling high-capacity fraction collection of purified compounds for semipreparative and preparative-scale LC purification. This module is ideally suited to open-access environments, provides all standard trigger modes for purification workflows, and is optimized for flow rates up to 200 mL/min.

The 1260 Infinity II Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C.

The 1290 Infinity II Preparative Column Compartment is a high-end support module for purification workflows. It provides sufficient capacity to store up to four analytical and six preparative columns supporting dimensions from 4.6 to 50 mm inner diameter and 50 to 250 mm length. Five multipurpose slots are available for mounting of valves, delay coils, and further auxiliary purification modules.

The 1260 Infinity II Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C.

The 1260 Infinity II Preparative Column Organizer is a support module for purification workflows. It provides convenient and stable mounting of a manual injector and easily organizes both analytical and preparative columns from 4.6 to 50 mm inner diameter.

The 1290 Infinity II Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects. 

The 1290 Infinity II Variable Wavelength Detector enables highest productivity with fast analysis at up to 240 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications.;

The 1260 Infinity II Diode Array Detector WR offers multiple wavelength and full spectral detection up to a 120 Hz sampling rate. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 15 analytical, preparative, and SFC flow cells. Even at high data rates, the 1260 Infinity II DAD WR enables precise identification, quantification, and peak purity analysi…

The 1260 Infinity II Evaporative Light Scattering Detector (ELSD), although targeted at analytical scale, can also be used with a flow splitter for preparative chromatography applications. It is highly recommended for compounds with little or no UV chromophore, since the detector technique evaporates the solvent and then measures the intensity of the scattered light, which is directly proportional to the sample concentration.

The 1260 Infinity II High-Temperature Evaporative Light Scattering Detector (HTELSD) is capable of detecting very low concentrations of high-molecular-weight polyolefins (polyethylene and polypropylene) at elevated temperatures. The need to analyze ultrahigh-molecular-weight polyethylene (UHMWPE) requires a new detection technique that offers a high level of baseline stability in order to reproducibly detect and permit accurat…

The InfinityLab LC Companion acts as a mobile LC user interface to allow for remote control, monitoring, signal plotting, and diagnostics of Agilent 1260 and 1290 Infinity II LC systems. With the InfinityLab Companion, any mobile device - such as a tablet device or smartphone - with a compatible web browser can be turned into a mobile user interface to quickly check the status of your LC instrument.

Cary UV Workstation software is next-generation analytical UV-Vis software that includes streamlined methods for wavelength reads, scanning, concentration, kinetics, or temperature measurements. Take advantage of the Cary 3500 Multizone software add-on to control four independent temperature zones and use Cary temperature probes to control temperature from inside the cuvette.  

The Agilent MicroLab software is easy-to-use FTIR software for routine applications. This software suite reflects the essentials of Agilent FTIR spectrometers—powerful, reliable, simple to use, and focused on what you really need—answers.

Agilent MicroLab Mobile software uses the same framework as the PC version of the software, but on a mobile platform, allowing users to select a variety of methods with the click of a button. With MicroLab Mobile, you can collect data, identify unknown substances, and quantify known contamination sources.  

Agilent QuickProbe- Direct, real-time MS analysis of powders, solids, and liquids

The Magnis system provides a complete workflow for NGS library preparation that is fully automated and delivers reproducible results. Built on proven Agilent SureSelect XT HS2 chemistry, start from total RNA with integrated cDNA conversion or unfragmented DNA with onboard enzymatic fragmentation for increased workflow efficiency.