Eliminate electrical interference from any analog signal, without filtering. Ideal for electrophysiology applications like EKG, EMG, and EEGs. Removes 50/60hz noise and harmonics caused by grounding problems, high gain amps, audio equipment, etc.
12VDC solenoid valve controller for real-time or pre-programmed liquid switching in perfusion, physiology, biophysics, electrochemistry, or general liquid-handling research applicationsIncrease reproducibility with 1 millisecond accuracyValveGuard™ technology detects bad valvesPrevent damage to your ValveLink and easily observe problem valves.Run experiments automatically - even unattendedMicroprocessor-based for accuracy and…
Computer-controlled microelectrode amplifier with a high-speed current clamp capable of sharp-electrode, field potential or ion-selective measurements, and a patch clamp for whole-cell, excised or cell-attached patches, bilayers, and electrochemistry with voltammetry or amperometry. MultiClamp 700B is shipped with the following,MultiClamp 700B Amplifiero Two 1-CV-7B headstageso US power cord (Part Number 1-3010-0011)o Europea…
Comprehensive electrophysiology data acquisition and analysis software. Provides both sweep-oriented stimulation and continuous data acquisition along with online analysis. Analyses all types of data: patch-clamp I-V, action potentials, minis and single-channel. Includes graphing and layout capability. pCLAMP 10 is shipped with the following:o pCLAMP 10 CD (Part number 1-2700-0167)o pCLAMP 10 USB security key (Part number 1…
* Slices maintained for many hours prior to transfer to recording chamber* Simple to set up and maintain * Many slices supported on FOUR quick-change nylon netsThe Brain Slice Keeper 4 has been designed to pre-incubate brain slices prior to transfer into recording chambers. It consists of FOUR pairs of closely fitting acrylic rings, upper and lower, between which is wedged a sheet of nylon netting. In operation, it is totally…
µ-Slide for stable gradients, 3 chambers on one slide for chemotaxis and migration assays• long term chemotaxis experiments with adherent cells• ready to use system, no assembling• linear gradients, stable for over 48 hours• 3 chambers on one slide for parallel working• adapters for different pipettes• made for high-end video microscopybasic principle: two large reservoirs of 40µl are connected by a narrow observation areathe…
Magnetic base, arms, manifold and tube holders mount everything securely on your microscope stage for electrophysiology and perfusion. The magnetic base of these different StageHands are designed to stick tightly to a steel ring around your perfusion chamber like our QuickStageTM, or any steel surface nearby. They include a 1⁄4-20 screw to insert into a non-magnetic platform or air table. Footprint: 0.75"" (19 mm), adjustable…
Perfusion System for real-time or pre-programmed liquid switching in perfusion, physiology, biophysics, electrochemistry, or general liquid-handling research applicationsIncrease reproducibility with 20 millisecond accuracyValveGuard™ technology detects bad valvesPrevent damage to your ValveLink and easily observe problem valves.Run experiments automatically - even unattendedMicroprocessor-based for accuracy and flexibilityBec…
* Combination inline heater plus multi-channel focal drug deliveryMaintain bath temperature and rapid drug wash-out with a high-flow bath line while quickly switching 8 preheated solutions through the Perfusion Pencil.® Steady 37°C at 5 ml/minute flow rates through both the bath line and tip. * Advanced auto-tuning temperature lockFuzzy logic PID software maintains chamber or reagent temperature to within 1°C of setpoint or be…
For programmable dispensing, microinjection, perfusion or spritzing of reproducible microliter volumes. Pulse a valve quickly for microliter delivery, or leave it on for constant perfusion. The short delivery path saves expensive reagents.• Deliver microliter volumes starting with as little as 100 microliters of precious drugsSwitch between eight solutions in milliseconds from a single tip• Minimize cross-contamination with Ba…
Bubbles in perfusion systems are caused by solution temperature changes. As solutions warm, they cannot hold as much gas, so they off-gas. This forms bubbles in perfusion tubing. It is especially true in inline heaters where the temperature rises dramatically. The best cure for bubbles is to pre-warm your solutions. AutoMate Scientific introduces the BubbleStop™ Syringe Heater with integrated temperature sensor and feedback. S…
Program your AutoMate Scientific ValveBank® valve and TTL on-off sequences with a Windows 98, 2000, or XP computer using 'click-and-drag' timebars. Save and load unlimited programs to disk, print-out program listings, then download your programs into the ValveBank's memory in one simple step.Features: *Supports up to 16 channels *Open multiple experiment windows *List programs to screen or printer *Supports all ValveBank…
12VDC solenoid valve controller for real-time or pre-programmed liquid switching in perfusion, physiology, biophysics, electrochemistry, or general liquid-handling research applicationsIncrease reproducibility with 10 millisecond accuracyStand-alone design - no computer necessaryRun experiments automatically - even unattendedMicroprocessor-based for accuracy and flexibilityBecause they lack a microprocessor, competing valve co…
0-10 psi precision pressure regulator, gauge and bubblers for oxygenation or gas saturation of perfusion reservoirs or syringes.Can be added to any new or existing perfusion rig - from AutoMate Scientific, any third-party manufacturer, even homemade.Connect to a tank/bottle of gas (30 to 100 psi).Elegant design allows individual control of each gas line.
Manifold and bubblers for oxygenation or gas saturation of perfusion liquids in reservoirs or syringes.Can be added to any new or existing perfusion rig - from AutoMate Scientific, any third-party manufacturer, even homemade.Connect to a tank/bottle of regulated gas (10 psi max).Elegant design allows individual control of each gas line.
Four 12V DC, two-way solenoid Teflon™ isolation valves mounted in a ringstand-ready metal case. Normally equipped with 1/8" hose barb inflow fittings and 1/16" outflow hose barb fittings. Each valve includes an indicator LED. Valves include 5' long cables terminated with RCA male connectors.
Four 12V DC, two-way solenoid Lee mini valves mounted in a ringstand-ready metal case. Equipped with 1/16" hose barb fittings, each valve includes an indicator LED. Valves include 5' long cables terminated with RCA male connectors.
Four 12V DC, two-way, solenoid, pinch, isolation valves mounted in a ringstand-ready metal case. Each valve includes a short piece of silicon 1/16" o.d., 1/32" i.d. pinch valve tubing, and an indicator LED. Valves include 5' long cables terminated with RCA male connectors.
An 8-into-1 multi-barrel manifold with male luer-lock fitting + removable tip available in 100, 250, or 360 micron internal diameter.Applications: *Single-cell and patch superfusion spritzing *Rapid (several millisecond) solution switching *Micro-liter dead volume8 micro-bore internal tubes come ready to connect to 1/16" i.d. tubing.Device is designed to mount in a micromanipulator.Materials: *Polypropylene, polyimide (ny…
Brownlee's rugged yet easy-to-use amplifiers have four channels of a high gain/low noise amplification, lowpass filter and output offset control. A control knob adjusts amplifier parameters, and an alphanumeric LED readout displays values. There is a memory function for each channel. Input voltage noise is only 1.5µV rms.The Brownlee Precision Model 410 is a four-channel general purpose laboratory amplifier (one channel shown)…
In addition to the Model 410 amplifier's features, the Model 440 offers an 8-pole Bessel lowpass filter, auto-zeroing, a line notch filter, highpass filter, multiple memories per channel, and a digital voltmeter on 2 channels. A wide bandwidth of over 500 kHz at all gains insures smooth recordings.The Brownlee Precision Model 440 incorporates four channels of sophisticated amplifier and filter circuitry in a friendly easy-to-u…
Small (approx. 6 x 20 mm) Teflon™ part for combining eight pieces of 1/16" o.d. hard tubing (PE-160 or Teflon) into one outflow. For bath and Oocyte perfusion. Includes built-in flow rate adjustment screw.
Please order in 10' increments.
