Corning Life Sciences Products & Reviews

Brand: PYREX®

This 1L PYREX® extractor body has a 45/50 Standard Taper outer top joint, a middle 35/25 Spherical Joint ball joint and a bottom 18/9 Spherical Joint socket joint. It is a component of the modular Continuous Heavier than Water Liquid/Liquid Extractor (Nos. 3922-M and 3924-M) and Extractor/Concentrator Systems (No. 3928-M

Brand: PYREX®

These 12mm diameter PYREX® gas dispersion tubes have a coarse porosity (40 to 60 µm) fritted cylinder and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted cylinder and the liquid used. The finer porosity discs give smaller bubbles, however greater gas pressure is required. The 12mm O.D. fritted cylinder permits insertion through small openings. For more information…

These 12mm diameter PYREX® gas dispersion tubes have an extra coarse porosity (170 to 220 µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however greater gas pressure is required. The 12mm O.D. fritted cylinder permits insertion through small openings. For more information…

These PYREX® gas dispersion tubes have a 30mm diameter coarse porosity (40 to 60 µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however greater gas pressure is required. Centrally located stem permits insertion through small openings. For more information on fritted produ…

These PYREX® gas dispersion tubes have a 30mm diameter extra coarse porosity (170 to 220 µm) fritted disc and are used to disperse or scrub gas in liquids. The size of gas bubbles depends upon the porosity of the fritted disc and the liquid used. The finer porosity discs give smaller bubbles, however greater gas pressure is required. Centrally located stem permits insertion through small openings. For more information on fritt…

These large PYREX® filling bells are ideal for aseptically filling culture tubes and bottles with maximum rim diameter of 44mm. Tubulation has a 11mm O.D. PYREX® aspirator bottles (Nos. 1220 and 61220) have a bottom sidearm tubulation that can be used with these filling bells to aseptically dispense sterile media and solutions.

These small PYREX® filling bells are ideal for aseptically filling culture tubes with up to 20mm. O.D. (without lip). Tubulation has a 7mm O.D. PYREX® aspirator bottles (Nos. 1220 and 61220) have a bottom sidearm tubulation that can be used with these filling bells to aseptically dispense sterile media and solutions.

For aseptic filling of vessels. Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

For aseptic filling of vessels. Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

For aseptic filling of vessels. Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

For aseptic filling of vessels. Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

For aseptic filling of vessels. Rubber tubing is attached to the top of the tubulation while the receiving vessel is placed inside the bell.

Generic bar coded Corning microplates are now available in stock and ready to ship. Code 128 bar code format ensures compatibility with most bar code scanning and software systems. To avoid mix-ups, the surface treatment of the microplate wells is easily identified in the human readable portion of the bar code (NT = not treated; TC = tissue culture treated; NB = nonbinding surface).Labels applied to all 4 sides of the plateNo…

These 100 mL PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems. The lower stem has a 19/22 Standard Taper inner joint at the bottom and extends upward inside the body. The closed top of this stem has two side openings. The upper stem has a 24/40 Standard Taper outer joint.

These 100 mL PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems. The lower stem has a 24/40 Standard Taper inner joint at the bottom and extends upward inside the body. The closed top of this stem has two side openings. The upper stem has a 24/40 Standard Taper outer joint.

These 250 mL PYREX® traps are used in rotary evaporators. They have a round body with upper and lower stems. The lower stem has a 24/40 Standard Taper inner joint at the bottom and extends upward inside the body. The closed top of this stem has two side openings. The upper stem has a 24/40 Standard Taper outer joint.

These 125 mL PYREX® flat bottom boiling flasks have long necks with tooled mouths and take a No. 2 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest…

These 12L PYREX® flat bottom boiling flasks have short necks with tooled mouths and take a No. 11 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest l…

These 1L PYREX® flat bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest lab…

These 250 mL PYREX® flat bottom boiling flasks have long necks with tooled mouths and take a No. 5 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest…

These 2L PYREX® flat bottom boiling flasks have long necks with tooled mouths and take a No. 8 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest lab…

These 50 mL PYREX® flat bottom boiling flasks have long necks with tooled mouths and take a No. 1 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest l…

These 500 mL PYREX® flat bottom boiling flasks have long necks with tooled mouths and take a No. 6 rubber stopper. They are manufactured from No. 7740 borosilicate glass. Wall thicknesses are carefully controlled to provide the proper balance between thermal expansion and mechanical strength for greater shock resistance. Their excellent chemical durability results in contamination-free results and long life under the toughest…