Products & Reviews

Asia is a range of advanced flow chemistry products from Syrris. It has been designed by chemists for chemists to enable the widest variety of chemical reactions and ultimate ease of use.

Atlas Potassium is designed for chemists who perform reactions in jacketed reactors. With an easy to use vessel clamping system and integral oil drain module, Atlas Potassium vessels can be changed in under a minute. Integrated temperature and circulator control from the Atlas base unit make reactions easier than ever before. Atlas Potassium is equipped with a 250ml round bottom Jacketed Vessel which can be substituted if requ…

Atlas Sodium automates reactions in round bottomed flasks. It is equipped with a Magnetic Stirrer (up to 1200RPM) and a Scorpion Overhead Stirrer for viscous reactions (up to 800RPM). The Stacking Dry Bath enables heating of round bottom flasks from 50ml to 1 litre (to 280°C). Accurate reaction temperature control is provided using a Temperature Node and RTD Probe. The Atlas Clamp holds a range of different vessel sizes secure…

FRX100 is an entry level set-up designed to give users an introduction to flow chemistry with the ability to produce relatively large amounts of material. FRX100 combines the performance of the FRX pumps with a 4ml tube reactor which is small enough to do reaction development but large enough to run preparative experiments. The system is completed with a pressure controller, which gives the possibility of operation above solve…

FRX200 is a flexible system enabling solid phase or solution phase chemistry on mg - kg scale and multi step chemistry. FRX200 is designed to give a wide range of options for people wanting to investigate flow chemistry. Allowing users to conduct solid-phase chemistry in addition to multi-stage synthesis and reactions under pressure. FRX200 combines a range of reactors (micro rectors, tube reactors and solid-phase columns) w…

FRX300 is a complete workstation giving any chemist a wide range of experimental possibilities with flow reactions. By including the FLLEX, liquid-liquid extraction module, FRX300 allows materials to be prepared and worked up automatically. FRX300 provides an introduction to automatic workup of flow reactions. With integrated injection loops to add materials to the flow and a range of different volume reactors, FRX300 gives us…

The FRX400 includes all the functionality of FRX300 but also has the full range of Syrris reactors, 4 Pumps, 2 Hotplates, 2 Reagent Modules and the Cooling Insert. This enables up to 4 inputs into a multi step reaction or 3 inputs and an immiscible aqueous work-up stream, reaction steps at different temperatures, cooling to -20°C and injection of small quantities of up to 4 reagents via sample loops. The FLLEX (Flow Liquid Liq…

The Atlas Syringe Pump is a versatile volumetric dosing system that consists of two syringes and can be configured into 2 refilling flows or 1 continuous flow. It can operate in isolation by use of the intuitive twist and click knob and display or can be controlled by the Atlas Base. A choice of dosing modes allows simple additions or intelligent active control of parameters including pH and temperature.

The Orbit from Syrris is a high performance, low cost parallel synthesis module for research and development chemistry. It fits conveniently on an Atlas hot plate, Atlas hot/cold plate or regular hotplate. 6 or 12 reaction tubes can be magnetically stirred in an inert atmosphere and be heated to 280°C with reflux or cooled to -40°C.

The Remote Mount allows a vessel assembly to be located away from the Atlas Base. The Remote Mount can attach to standard lab scaffolding and is connected to the Atlas base using an umbilical. When the Jacketed Vessel Clamp is used with the Remote Mount, it is compatible with vessels of up to 5 litres.

The Atlas Hot and Cold Plate is an easy and accurate way of heating and cooling reactions in flasks or vials. Designed to fit on the Atlas Base, the Hot and Cold Plate connects to a recirculating heater/cooler to provide temperature control from -40°C to +160°C. When a controllable circulator is connected to the Atlas Base, the Hot and Cold Plate or reaction can be accurately controlled to the temperature set on the Atlas Base…

Atlas Lithium automates reactions in round bottomed flasks or vials. The Hotplate and Stacking Dry Bath can heat round bottom flasks from 50ml to 1 litre (to 280°C) giving excellent thermal transfer to the reaction yet the exterior surface remains cool to the touch. The Atlas Clamp holds a range of different vessel sizes securely and automatically aligns flasks to the dry bath.

The Atlas Syringe Pump is a versatile volumetric dosing system that consists of two syringes and can be configured into 2 refilling flows or 1 continuous flow. It can operate in isolation by use of the intuitive twist and click knob and display or can be controlled by the Atlas Base. A choice of dosing modes allows simple additions or intelligent active control of parameters including pH and temperature.

Based on an Atlas Potassium, the Atlas Gravimetric Dosing system allows a defined mass of reagent to be pumped from a balance to the reactor by a controlled peristaltic pump. The mass flow rate can be defined, monitored and adjusted by using the Atlas Software.

Based on an Atlas Potassium, the Atlas Reaction Monitoring system includes additional temperature nodes and RTD probes to monitor the jacket temperature. The Reaction Monitoring system can use a combination of reaction temperature and jacket temperature to accurately monitor both exothermic and endothermic reaction processes either using the Atlas software or through the Atlas base.