Cannabis testing is a process that evaluates the safety, potency, and quality of cannabis products for medical and recreational use. Through rigorous analysis, cannabis testing laboratories assess factors such as cannabinoid content, terpene profiles, and levels of contaminants like pesticides and heavy metals. By ensuring compliance with regulatory standards and consumer safety, cannabis testing plays a crucial role in promoting transparency and confidence in the burgeoning cannabis industry. Explore how cannabis testing laboratories contribute to delivering reliable and high-quality cannabis products to consumers worldwide.
Providing Ultimate Sensitivity for Vapor Phase and Particulate Isocyanates.The ASSET EZ4-NCO dry sampler for isocyanates is the easy-to-use sampler offering the ultimate sensitivity for collection & measurement of vapor phase and particulate isocyanate monomers and oligomers.Key Features and Benefits:• Ability to achieve reliable, low detection limits• Only device to measure vapor phase and particulate isocyanates• Sampling fo…
BIOshell™ A160 Peptide C18, 2.7 μm HPLC Columns BIOshell A160 Peptide C18 columns packed with 2.7 μm particles, 160 Å pores, are as efficient as sub-2-μm porous particles, but at ½ the backpressure.These columns can be operated long term at pressures up to 600 bar (60 MPa or 8500 psi), temperatures up to 90 °C and within the pH range of 1 to 8. BIOshell A160 Peptide C18 columns can be run on all HPLC systems including UHPLC s…
Radiello™ Cartridge Adsorbents for sampling HF, NO2, and SO2, matrix microporous PE impregnated with wet TEA.Passive or diffusive sampling relies on the diffusion of analytes through a diffusive surface onto an adsorbent. After sampling, the analytes are chemically desorbed by solvent extraction or thermally desorbed and analyzed. Passive sampling is quiet, non-flammable and does not represent an explosion hazard. It can be pe…
Radiello™ Cartridge Adsorbents for sampling Ammonia (NH3), matrix microporous PE impregnated with phosphoric acid.Passive or diffusive sampling relies on the diffusion of analytes through a diffusive surface onto an adsorbent. After sampling, the analytes are chemically desorbed by solvent extraction or thermally desorbed and analyzed. Passive sampling is quiet, non-flammable and does not represent an explosion hazard. It can…
Radiello™ Cartridge Adsorbents for sampling BTEX and VOCs (CS2 Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh).Passive or diffusive sampling relies on the diffusion of analytes through a diffusive surface onto an adsorbent. After sampling, the analytes are chemically desorbed by solvent extraction or thermally desorbed and analyzed. Passive sampling is quiet, non-flammable an…
“QuEChERS” (Quick, Easy, Cheap, Effective, Rugged, and Safe) - Supel™ QuE PSA Tube, pk of 50, suitable for EN 15662:2008 per BSDispersive SPE (dSPE), often referred to as the "QuEChERS" method, is an emerging sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. In dSPE, food/agricultural samples are first extracted with aqueous miscible…
"QuEChERS” (Quick, Easy, Cheap, Effective, Rugged, and Safe) - Supel™ QuE Acetate Tube, pk of 50, suitable for 2007.01 per AOACDispersive SPE (dSPE), often referred to as the "QuEChERS" method, is an emerging sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. In dSPE, food/agricultural samples are first extracted with aqueous miscible…
"QuEChERS” (Quick, Easy, Cheap, Effective, Rugged, and Safe) - Supel™ QuE Citrate Extraction Tube, pk of 50, suitable for EN 15662:2008 per BSDispersive SPE (dSPE), often referred to as the "QuEChERS" method, is an emerging sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. In dSPE, food/agricultural samples are first extracted with aq…
SLB-IL60 Ionic Liquid Capillary GC ColumnApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 ºC compared to 270-280 ºC). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.USP Code: NonePhase: Non-bonded; 1,12-Di(t…
SLB-IL59 Ionic Liquid Capillary GC Column• Application: Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 ºC compared to 270-280 ºC). Great choice for analysis of neutral and moderately basic analytes. Launched in 2009.• USP Code: None• Phase: Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide• Temp. Limits: Su…
SUPELCOWAX® 10 Capillary GC Column• Application: This column is based on one of the most widely used polar phases, Carbowax 20M, and is a polar column suitable for analyses of solvents, fatty acid methyl esters (FAMEs), food, flavor and fragrance compounds, alcohols, and aromatics. Additionally, this column is a great choice when a polar general purpose column is required.• USP Code: This column meets USP G16 requirements.• Ph…
Equity-5 Capillary GC Column• Application: This popular column is designed for general purpose applications where a non-polar column is required. The low phenyl content provides thermal stability compared to 100% poly(dimethyl siloxane) columns.• USP Code: This column meets USP G27 and G36 requirements.• Phase: Bonded; poly(5% diphenyl/95% dimethyl siloxane)• Temp. Limits: ≤0.32 mm I.D., • Temp. Limits: ≤0.32 mm I.D., ≥2 μm: -…
SPB-5 Capillary GC Column• Application: This non-polar general purpose column provides primarily a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds.• USP Code: This column meets USP G27 and G36 requirements.• Phase: Bonded; poly(5% diphenyl/95% dimethyl siloxane)• Temp. Limits: ≤0.32 mm I.D., • Temp. Limits: ≤0.32 mm I.D., ≥2 μm: -60 °C to 300 °C (isothermal or programmed)• T…
The SPME-LC fiber probes are intended as single-use devices for the extraction of small molecules out of a fluid followed by solvent desorption and LC analysis.Traditional solid phase microextraction (SPME) fibers were developed with common GC type phases, which were primarily designed for extraction of volatile or semi-volatile compounds using thermal desorption as the means of introducing sample into the chromatographic colu…
Carboxen®/Polydimethylsiloxane (CAR/PDMS) SPME FibersSolid Phase Microextraction (SPME) is an innovative, solvent-free sample prep technology that is fast, economical, and versatile. SPME uses a fiber coated with a liquid (polymer), a solid (sorbent), or a combination of both. The fiber coating removes the compounds from your sample by absorption in the case of liquid coatings or adsorbtion in the case of solid coatings. The…
Divinylbenzene/Carboxen/Polydimethylsiloxane (DVB/CAR/PDMS) SPME FibersSolid Phase Microextraction (SPME) is an innovative, solvent-free sample prep technology that is fast, economical, and versatile. SPME uses a fiber coated with a liquid (polymer), a solid (sorbent), or a combination of both. The fiber coating removes the compounds from your sample by absorption in the case of liquid coatings or adsorbtion in the case of sol…
The Perfect Combination of Low Bleed, Thermal Stability, and Easy Puncturability!Molded Thermogreen LB-2 septa are manufactured from high quality, low bleed material using the same exclusive LB-2 rubber formulation that chromatographers are accustomed to using. The difference is that molded septa, unlike traditional die-cut septa, offer easier installation and better sealing inside the injection port. This is because our liqui…
Supelco provides high quality derivatization reagents for silylation.Silylation is the most widely used derivatization technique. Functional groups that present a problem with gas chromatogaphy detection - hydroxyl, carboxylic acid, amine, thiol, phosphate - can be derivatized by silylation reagents. Silylation involves replacement of the acidic hydrogen with an alkylsilyl group, for example, -SiMe3.Silylation derivatives are…
Supelco provides high quality derivatization reagents for acylation.Acylation, an alternative to silylation, allows the conversion of compounds with active hydrogen such as -OH, -SH, and -NH into esters, thioesters and amines, respectively. A very popular example of this method is the insertion of perfluoracyl groups to enable electron capture detection (ECD). Carbonyl groups adjacent to halogenated carbons enhance the ECD res…
Supelco provides high quality derivatization reagents for akylation and esterification.Alkylation is the replacement of the active hydrogen in R-COOH, R-OH, R-SH, R-NH, R-NH2, R-CONH2, R-CONH-R′ with an alkyl group, or sometimes an aryl group.Esterification is the first choice for derivatization of carboxylic acids and other acidic functional groups. Acids are reactive compounds, and are too polar to be well separated by gas c…
Supelco® has developed a line of high performance fittings that maintain the integrity of your HPLC systems up to 15,000 psi with mere finger tightening!The use of HPLC systems to achieve faster analyses and increased resolution pushes systems toward higher operating pressures. Our selection of Supel™-Connect High Performance Interconnects and Fittings will assist the chromatographer in maximizing system performance and reliab…
Supelco’s complete line of stock and custom packed GC columns are configured to fit most commercially available GC instruments.Supelco® has been the leader in packed GC column technology for over 40 years. Should you not be able to locate a stock item to fit your needs, our custom capabilities allow us to manufacture columns and packings to your specifications. In addition we also carry hard-to-find tools specifically designed…
High Capacity Gas Purifiers (Remove Moisture and Oxygen)The best purifier choice for removing moisture and oxygen from carrier gas streams is our High Capacity Gas Purifier. It consists of three parts:• Clam-shell oven• Replaceable heating elements• Replaceable converter tube.A convenient starter kit contains all three items for new installations.
Supelcarb® is Back by Popular Demand!Supelco® is pleased to welcome the Supelcarb HC Hydrocarbon trap back to our line of in-line gas purifiers! Supelcarb adsorbent has the greatest trapping ability of hydrocarbons per gram of adsorbent (twice that of activated charcoal). These traps are the best traps available for removing hydrocarbons and other organics from carrier, fuel, air and other gas streams.
Specialty In-Line Purifier for GC-MS HeliumThe most sensitive GC-MS instruments require a steady stream of ultra-high purity (99.99999%) helium for optimal performance. To achieve this level, a specialty purifier is required. These purifiers contain multiple adsorbent beds for the removal of all critical contaminants. Additionally, the adsorbent materials are packed into the cartridge under helium to ensure no other gas off-g…
