Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
High recovery Durapore (PVDF) and hydrophilic PTFE membranesFive different pore sizes from 0.1 to 5.0 µmPre-sterilized units also availableFast filtration and highly reproducible performanceUse in fixed-angle rotors for 15 mL tubes
Easy, pre-sterilized, centrifugal sample clarification units for either 0.5 mL (MC) or 2 mL (CL) maximum volumes.High recovery Durapore (PVDF) membraneFast filtration and highly reproducible performanceUse in fixed-angle rotors for 1.5 mL tubes (MC) or 15 mL tubes (CL)
Montage Antibody Purification Kits are designed for fast and easy antibody purification from serum, ascites or cell culture supernatants. The kits include spin columns pre-packed with high capacity PROSEP-A or G media. There are no pumps to setup. No columns to pack. All you need is a centrifuge to purify 10–20 mg in less than 60 minutes.The protocol is easy to follow and, unlike traditional gravity flow methods, the use of ce…
Concentrates 2 mL down to 15-70 µL 98% sample recovery Fast processing time - 10 to 30 minute spin times Engineered dead stop Reverse spin capability provides consistent recoveries
Automation compatible filter units from EMD Millipore are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.Choice of Filter Media: Automation compatible filter units are available in a variety of membrane types and pore sizes, including units with prefilters for particulate-laden samples.Automation Compatible Packaging: The 200 pack comes preassembled in 8 t…
Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also used for vacuum line protection. All units are bi-directional
This 13 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration, has a 0.45 micron pore size used in preparation of aqueous & mild organic solutions prior to chromatography or other instrument analyses.
Millex-GP Filter for Samplicity G2, 0.22 µm, PES 33 mm, non-sterile
Dextran Sulfate (MW 500,000) is used as an additive in probe hybridization solutions. Its presence accelerates the rate of hybridization by 10 fold. The addition of Dextran Sulfate favors the formation of probe networks, resulting in greater sensitivity during membrane-bound nucleic acid analysis. The product is supplied as a 50% (w/v) solution.
Hybrisol® Hybridization Solutions are pre-made, ready-to-use solutions optimized for sensitive single and multiple gene copy detection using membrane-based hybridization techniques. They are designed to give maximum signal and clean background for hybridizations performed on nylon and nitrocellulose membranes. Hybrisol® Solution contains 10% Dextran Sulfate, 1% SDS, 50% Formamide, 6X SSC, Sheared DNA, and Modified Denhardt's S…
EMD Millipore's hERG membrane preparations are crude membrane preparations made from HEK293 stable recombinant cell lines, which are ideal HTS tools for screening antagonists against the hERG channel. The membrane preparations exhibit a Kd of 5.2 nM for [3H]-Astemizole. With 10 μg/well hERG Membrane Prep and 3.0 nM [3H]-Astemizole, a greater than 4-fold signal-to-background ratio was obtained.
EMD Millipore's cAMP HTS immunoassay kit, 384 well is a competitive immunoassay for quantitative chemiluminescence-based detection of cAMP in cell lysates and supernatants, which has been optimized for use in high throughput screening applications. The kit provides two ready to use 384 well pre-coated assay microplates and all reagents required to perform the assay.
Chem-1 cells are an adherent cell line endogenously overexpressing Galpha15 that is used as a host for Chemicon's ChemiScreen™ GPCR Membrane Preparations. Chemicon's ChemiScreen™ Wild-Type Chem-1 Membrane Preparations are ideal controls for validation of radioligand binding assays employing ChemiScreen™ GPCR Membrane Preparations in the Chem-1 host cell line.
Chemicon's cloned human CXCR1-expressing cell line is made in the Chem-1 host, which supports high levels of recombinant CXCR1 expression on the cell surface and contains high levels of the promiscuous G protein Gα15 to couple the receptor to the calcium signaling pathway. Thus, the cell line is an ideal tool for screening for antagonists of interactions between CXCR1 and its ligands.
EMD Millipore's CXCR1 membrane preparations are crude membrane preparations made from our proprietary stable recombinant cell lines to ensure high-level of GPCR surface expression; thus, they are ideal HTS tools for screening of antagonists of CXCR1 interaction with IL-8. The membrane preparations exhibit a Kd of 0.2 nM for [125I]-IL-8. With 5 μg/well CXCR1 Membrane Prep and 0.1 nM [125I]-IL-8, a greater than 5-fold signal-to-…
Chemicon's cloned human CXCR2-expressing cell line is made in the Chem-1 host, which supports high levels of recombinant CXCR2 expression on the cell surface and contains high levels of the promiscuous G protein Galpha15 to couple the receptor to the calcium signaling pathway. Thus, the cell line is an ideal tool for screening for antagonists of interactions between CXCR2 and its ligands.
Chemicon's CXCR2 Membrane Preps are ideal tools for screening for antagonists of interactions between CXCR2 and its ligands. Radiolabeled IL-8 binds to the CXCR2 membranes with a Kd of 0.075 nM. With 0.1 nM 125I-labeled IL-8, a 5-fold window of specific binding is obtained.
Chemicon’s cloned human CXCR3-expressing cell line is made in the Chem-1 host, which supports high levels of recombinant CXCR3 expression on the cell surface and contains high levels of the promiscuous G protein G16 to couple the receptor to the calcium signaling pathway. Thus, the cell line is an ideal tool for screening for antagonists of interactions between CXCR3 and its ligands.
EMD Millipore’s ChemiScreenTM CXCR3 receptor membrane preparations are ideal tools for screening for antagonists of CXCR3 interactions with its ligands. With 0.1 nM 125I-labeled IP10, the CXCR3 membrane preparation at 5 μg/well gives a signal:bakground of greater than 10-fold.
Chemicon's cloned human recombinant CXCR4-expresssing cell lines is made in Chem-1 host, which support high levels of recombinant CXCR4 expression on the cell surface and contains high levels of the promiscuous G protein Galpha15 to couple the receptor to the calcium signaling pathway. Thus, the cell line is an ideal tool for screening for antagonists of interactions between CXCR4 and its ligands
Chemicon's CXCR4 membrane preparations are crude membrane preparations made from our proprietary stable recombinant cell lines to ensure high-level of GPCR surface expression; thus, they are ideal tools for screening for antagonists of interactions between CXCR4 and SDF-1a. Radiolabeled SDF-1a binds to the CXCR4 membranes with a Kd of 0.9 nM. With 0.04-0.13 nM 125I-labeled SDF-1a, an approximately 3-fold window of specific bin…
Chemicon’s cloned human CCR1-expressing cell line is made in the Chem-1 host, which supports high levels of recombinant CCR1 expression on the cell surface and contains high levels of the promiscuous G protein G15 to couple the receptor to the calcium signaling pathway. Thus, the cell line is an ideal tool for screening for antagonists of interactions between CCR1 and its ligands.
Chemicon's CCR1 Membrane Preparations are ideal for screening molecules that disrupt interaction between CCR1 and its ligands. The CCR1 Membrane Preps bind to MIP-1a with a Kd of 1.8 nM, and yield greater than 10-fold signal to background ratio with a MIP-1a concentration of 0.1 nM.
