BIP Hydrogen
Air Products and Chemicals, IncThe only high-purity gas that guarantees minimal impurities.
Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
The only high-purity gas that guarantees minimal impurities.
The only high-purity gas that guarantees minimal impurities.
Because the column is meanly made out of silicon which is semi-conductive, a dramatic impact on the chromatographic behavior of our µPAC™ columns has been observed if no appropriate precautions are taken in case the column is connected to an ESI source of a mass spectrometer. Therefore we developed a custom made grounding cable to shunt the high voltage to ground.
The µPAC™ capLC columns are designed for increased robustness and throughput assuring sensitivity. A flow rate versatility between 1 and 15 µL/min at moderated pressures allows short gradient separations, while the µPAC™ technology ensures an exceptional high reproducibility over time and across laboratories. µPAC™ column, 50cm length, with pillar array backbone at interpillar distance of 2.5 µm, C18.
Enhance your early stage solid state screening with the CrystalBreeder bench-top system
Off-the-shelf cryopreserved human cells for generation of hepatic spheroids in your own lab
Introducing RNAscope HiPlex assay to expand your in situ hybridization potential.
The FROG-5000™ can detect volatile organic compounds (VOCs) in air , water , and soil , delivering lab-quality results in less than 10 minutes. It is the only portable gas chromatograph that weighs less than 5lbs (2.2kgs).
A revolution in GPC Cleanup system design, the AccuPrep MPSTM combines flexibility and cutting-edge features in a smaller package.
EzDrop 1000 Micro-Volume Spectrophotometer accelerates your research efficiency. It can complete the measurement of a sample concentration speedily in 3 seconds. EzDrop 1000 provides dynamic full-spectrum 190-1000 nm detection, while the sample window is equipped with Nano hydrophobic coating, ensuring highly accurate results. Coming with an intuitive operation screen, EzDrop 1000 makes each step fast and simple, helpin…
The SCION (SQ) GC-MS is designed for today’s fast paced analytical laboratory. Innovative design features such as a Lens-Free ion path, heated ion optics and an Extended Dynamic Range (EDR) detector enable the SCION SQ to deliver accurate quantification and identification on a routine basis, even in complex matrices.
The Thermo Scientific™ F7 robot combines the performance of an industrial robot with the application-driven benefits of a traditional Thermo Scientific laboratory robot. It's the ultimate solution for advanced motion applications.
B.I.-LISA IVDr Lipoprotein Subclass Analysis (Research use only)
B.I.QUANT-PS 2.0™ Bruker IVDr Quantification in Plasma/Serum (for research use only)
Support consistent and robust growth of 3D cell cultures with Corning Matrigel Matrix-3D Plates
BIOshell™ HPLC and UHPLC columns deliver maximum speed and efficiency for the separation of biomolecules on both HPLC and UHPLC systems. The novel, superficially porous silica particles (SPP), with pore sizes from 90 Å up to 1000 Å, allow the separation of glycans as well as of very large proteins.
Our HybridSPE ® -PLus plates effectively remove phospholipids and proteins from biological matrices in a simple pass-through method for accurate and reproducible LC-MS analysis. Unlike other phospholipid removal SPE products on the market, the unique retention mechanism of HybridSPE ® allows for separation of even very hydrophobic analytes from phospholipid contaminants.
For Customers in California only: WARNING Please refer to Safety Data Sheet (SDS) Section 15 or Letter in Lieu for more information regarding California Proposition 65.
175cm2 available growth area Manufactured from optically clear virgin polystyrene Printed with lot numbers for ease in traceability 100% integrity tested Sterilized by gamma irradiation Nonpyrogenic
(This is the suggested replacement for 359378)Corning® Cell Recovery Solution, 500 mL, enables the recovery of cells cultured on Corning® Matrigel® Basement Membrane Matrix for subsequent biochemical analyses.QualityTested for ability to depolymerize a 1mm thick layer of gelled Matrigel Matrix after one hour at 2° to 8°CFiltered (0.2 µm membrane) and tested for bacteria, fungi, and mycoplasmaPreparation and StorageStable for a…
Packaged 12 inserts in a 24 well plate, 4 plates per case 10 µm thick translucent polycarbonate membrane Treated for optimal cell attachment Membrane must be stained for cell visibility
Product is an accessory for the HTS Transwell®-96 Permeable Support system 96 individually isolated wells that are sterile For use in cell growth or assay steps of an experiment Used to minimize contamination when change of media is needed or to prevent cross contamination when media type is switched during cell growth step When used with HTS Transwell®-96 unit, the plate allows for convenient pipet access to both apical…
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 1 set per case 0.4 µm pore size PC (polycarbonate) membrane Membrane is treated for optimal cell attachment Receiver and reservoir plates are untreated Cell growth area is 0.143 cm2 which is 20-50% greater than other brands Large apical and ba…
Product includes: Transwell® unit (1 integral tray with 96 wells), reservoir plate (for cell growth steps), receiver plate (96 wells for growth or assay steps) and 2 sterile lids; 5 sets per case 1.0 µm pore size PET (polyester) membrane Membrane is treated for optimal cell attachment Receiver and reservoir plates are untreated Cell growth area is 0.143 cm2 which is 20-50% greater than other brands Large apical and baso…