Life Sciences Products & Reviews

Sidearm fittings for gas handling can be used to provide gases into larger Spinner Flasks with vertical sidearms during cell culture to enhance the productivity of the cell culture. Together with sensor probe fittings and media handling fittings, they allow Spinner Flasks to operate as bioreactors when they are attached to appropriate cell culture controllers at costs considerably below those of traditional bioreactor vessels…

These 250 mL PYREX® flasks, without tubulations, are blown in special molds in shapes designed to give maximum mechanical strength Marked to avoid confusion with similar sizes of Erlenmeyer flasks Graduated to show their approximate capacity Permanent white enamel graduations and marking spots Beaded rim uses a No. 6 rubber stopper

These 500 mL PYREX® flasks, without tubulations, are blown in special molds in shapes designed to give maximum mechanical strength Marked to avoid confusion with similar sizes of Erlenmeyer flasks Graduated to show their approximate capacity Permanent white enamel graduations and marking spots Beaded rim uses a No. 7 rubber stopper

These PYREX® 1L flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 10mm.

These PYREX® 250 mL flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 10mm.

These PYREX® 4L flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 12.5mm.

These PYREX® 500 mL flasks have sidearm tubulations and are blown in special molds designed to give maximum mechanical strength. For convenience, the flasks are graduated to show approximate capacity. The neck finish affords an excellent fit for rubber stoppers. Tubulation O.D. is 10mm.

These PYREX® 25 mL micro filtering flasks are recommended for microchemical use. The vacuum hose is attached to the flask's sidearm. A funnel is inserted into the neck of the flask through a ground joint or rubber stopper. The applied vacuum facilitates the filtration process. These flasks have permanent white enamel marking spots.

This Corning® kit Cat. No. 6795-420KIT includes: Cat. No. 6795-420D, one stirring hot plate Cat. No. 6795PR, external temperature controller Cat. No 440129, vertical support rod. Supplied as two 9 inch (22.9cm) support rods that can be screwed together (18 inches) Cat. No. 6970SR, stir bar retrieverAvailable for purchase separately and not included in the kit: Cat. No. 440140, boss head clamp Cat. No. 440141, holding rod…

This accessory kit is designed for all Corning digital display hot plates and stirring hot plates (Models PC-400D, PC-420D, PC-600D, PC-620D).This Corning® kit Cat. No. 6795KIT includes: Cat. No. 6795PR, external temperature controller Cat. No 440129, vertical support rod. Supplied as two 9 inch (22.9cm) support rods that can be screwed together (18 inches) Cat. No. 6970SR, stir bar retrieverAvailable for purchase separatel…

This Foam Insert is a replacement part for the 6949E, 6949G-2 and 6949K Corning® chemistry kits.

(This is the suggested replacement for 70160-152)These flat, clear Corning® petri dishes are made from Soda Lime Silica glass and will withstand repeated sterilization (wet or dry). Approximate dish bottom diameter and height is 142x22mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space the side walls of the bottom and cover, thereby reducing the capillary action of t…

(This is the suggested replacement for 70160-60)These flat, clear Corning® petri dishes are made from Soda Lime Silica glass and will withstand repeated sterilization (wet or dry). Approximate dish bottom diameter and height is 55x17mm. The edges are beaded to provide greater mechanical strength. The bead also provides a means to equally space the side walls of the bottom and cover, thereby reducing the capillary action of the…

(This is the suggested replacement for 7223-34)These pressed PYREX® glass plates have 9 concave depressions (22mm O.D. x 7mm deep) which are useful for soil chemistry, color reactions, microchemical applications and microscopic observations.

These reusable PYREX® 5 mL rimless Kahn culture tubes offer greater convenience in plugging and rack storage. These approximately 12x75mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 9 mL rimless Wasserman culture tubes offer greater convenience in plugging and rack storage. These approximately 13x100mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 11 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 16x100mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 15 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 16x125mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 20 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 16x150mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 27 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 18x150mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 34 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 20x150mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 55 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 25x150mm (OD x length) tubes have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 70 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 25x200mm (OD x length) tubes do not have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These reusable PYREX® 0.5 mL rimless culture tubes offer greater convenience in plugging and rack storage. These approximately 6x50mm (OD x length) tubes do not have marking spots. Walls and bottoms are of uniform thickness. Ends are fire-polished.

These 9 mL PYREX® culture tubes are supplied with deep-form 13-415 GPI threaded phenolic caps to facilitate handling and sealing after autoclaving. Caps are fabricated from a special formula resistant to the effects of temperature and steam in autoclaving and are provided with a glued-in, white rubber liner. The white enamel marking spot gives an excellent surface for pencil notations. Pencil marks are easily erased. For repla…