Separations is a fundamental scientific discipline focused on the isolation and purification of components from mixtures. Through techniques such as chromatography, distillation, and filtration, separations scientists separate substances based on their physical or chemical properties. This field plays a crucial role in various industries, including pharmaceuticals, food and beverage testing, environmental science, materials research, and more. Explore how separations techniques enable precise analysis, quality control, and the development of innovative products.
Agilent J&W HP-PLOT Q is a bonded polystyrene-divinylbenzene (DVB) column specially developed for the separation of targeted nonpolar and polar compounds, including hydrocarbons (natural gas, refinery gas, ethylene, propylene, all C1-C3 isomers); CO2, methane, air/CO, and water; polar solvents (methanol, acetone, methylene chloride, alcohols, ketones, aldehydes, esters); and sulfur compounds (H2S, mercaptans, COS).
Agilent DB-Sulfur SCD columns are optimized for use with Sulfur Chemiluminescence Detection (SCD) to provide low bleed performance and reduced SCD ceramic tube fouling.
PiP Pumps micro π-petter - Pipetting, Syringing and Diluting Ideal for repetitive and volumetric dispensing of acids, solvents and aqueous solutions. Model "PiP" Precision Dilutor Features: FMI's unique low dead-volume pump heads, and synchronous motor drives. Can act as a single shot dispenser using the hand/foot switch or as a single metering pump in the continuous mode. Using a combination of forwar…
Ideal for Analyzers, Environmental Sampling & Injection, & Low Current Remote Battery Operation Model QBG Low Current DC Features: Ideal for extended 12/24 volt battery operation in remote locations. They are rated 60 RPM at 12 VDC and 120 RPM at 24 VDC. One Moving Part - NO VALVES! Low Current DC Operation Self Priming Patented CeramPump® Design
The demand for a more powerful and colder condenser has naturally arisen as the boundaries of evaporation science are pushed further and further. Users increasingly regard as critical the importance of having the right condenser for the job, with the correct power and temperature profile matched to the characteristics of the evaporator. Genevac has developed the super-powerful and super-cold SuperCool 75, in collaboration wit…
Solid Phase Extraction (SPE) is the basis of analytical laboratories. A crucial step of this process is sample preparation. Therefore we know that a clean sample will yield better results. To achieve this goal SiliCycle has designed SiliaPrep, which is a silica based sorbent exempt of fines, and SiliaPrepX, polymeric based sorbent, that can be found in cartridges, well plates and SPME (Solid Phase Micro-Extraction) cartridges…
With a choice of over 40 different phases (and we continue to develop additional, unique and powerful HPLC sorbents) our SiliaChrom series of HPLC columns surely has the reversed or normal phase you need for your application.Mostly made from a silica-based sorbent, we carefully monitor the manufacturing process, from raw material synthesis to packing, ensuring you that our HPLC columns are of the highest quality.All columns ar…
For two decades, SiliCycle has been dedicated to silica gel manufacturing and has achieved a strong know-how and recognized expertise in this field. Furthermore, to support the increasing demand of our spherical silica gels, we have developed and optimized a highly controlled, large-scale, production process for all our SiliaSphere products, without compromising silica quality. SiliaSphere silica gels are manufactured from a…
There is a growing need for applications in food and environmental areas able to cope with the analysis of a large number of analytes in very complex matrices. New analytical procedures demand sensitivity, robustness, effectiveness and high resolution with reduced analysis time. To improve the efficiency of traditional methods, a new sample preparation approach was developed. It’s called QuEChERS and it says it all: an acrony…
The MiniBlock® is an easy-to-use reaction block designed for parallel synthesis and screening. Its unique valve body design enables processes where filtration is critical, including solid-phase organic synthesis, use of scavenger resins with solution phase synthesis and parallel purification via Solid-Phase Extraction (SPE).Make the choice many chemists have made to increase productivity, more so than any other similar tool.…
Fully Automated Column-based Preparative Fractionation Equipment for Polymers PREP C20 is a fully automated preparative pilot plant instrument designed to fractionate, in a column support, high amounts of polymer according to its chemical composition by a Temperature Rising Elution Fractionation (TREF) process.Additionally, PREP C20 facilitates cross-fractionation studies (fractionation through TREF and follow up analysis thr…
WIN IN EFFICIENCY, AUTOMATION, SPEED & SAFETY WITH OUR NEW SAMPLE PREPARATION DEVICES HORIBA Scientific offers a great range of possible solutions for our analyzers, to save time and ensure that the end results are as accurate as possible! Whatever your analytical solutions: ICP-OES, ICP-MS, AA, Fluorescence X, elemental analyzers, etc.… HORIBA Scientific can provide you with many sample preparation devices, such as: • Grinder…
SpeedCore is the very latest in core-shell technology for use in HPLC and UHPLC. Designed to offer enhanced efficiency, speed and resolution of analysis. Speedcore C18 is designed to provide characteristics which will enhance method development. It provides the ability to obtain sharp peak shapes whilst retaining and separating a wide variety of compounds both hydrophobic and hydrophilic.SpeedCore C18 Features: C18 Hydroph…
HT3000A is a liquid GC autosampler that offers reliability and superior performance for all GC-GCMS applications. The HT3000A is the most compact autosampler on the market, with a near-to-zero requirement for bench space, while offering a top-class sample capacity (121 positions for 2ml vials). The sample rack can be removed for sample loading or preparation, or for storage elsewhere.It can be easily installed on all the GC a…
HT4000L is an HPLC autosampler for high presise injection into HPLC, UHPLC, LC/MS and IC systems. HT4000L is lab automation ready. In fact HT4000L besides working as a standard HPLC autosampler, can take care of many sample preparation tasks as no standard autosampler has been able to assist up to now. Basic sample preparation capabilities includes dilution, precolumn derivatization, pH spiking and internal standard addition…
HT4000A is a sample preparation workstation that allows automation of sample preparation procedures by taking care of a large number of operations such as liquid handling, purification or filtration (including Solid Phase Extraction (SPE), Micro Extraction by Packed Sorbent (MEPS), Whatman® Mini-UniPrep® syringeless vials, syringe-filters and liquid/liquid extraction (LLE)), tracking and further sample processing such as vorte…
HT3100A is a liquid GC autosampler that offers automation for processing up to 15 unattended samples. It handles the most sophisticated sampling techniques: Multi-phase sampling, Sandwich injection, Priority sampling, Ambient headspace sampling, Nanoliter injection. It can be easily installed on all the GC and GC/MS systems available in the market, because of flexibility and modular configuration. It can be configured to serv…
HT3200A is a liquid GC autosampler, that takes advantage of today’s latest technology to deliver even greater reliability, performance, as well as offering an extraordinary GLP experience. The HT3200A has a top class sample capacity: no other offers so many samples (209 2mL sample vials) with near-to-zero bench space requirements.Key features: Easy to use Support all GCs of your lab Fast injection technology Versatili…
The HT2100H is an inexpensive, simple-to-use, as well as reliable headspace unit. With all the quality and reliability you expect, the HT2100H headspace sampler offers exactly the features you need — at a price to fit your budget.The HT2100H is a quality, cost-effective alternative to manual headspace. While manual sampling techniques are simple and inexpensive, they are also tedious, subject to human error and they are not a…
HT310L is a cost-effective HPLC autosampler, that offers automation for processing up to 10 unattended samples. By its competitive pricing is the alternative to the manual injector for users that cares about reproducibility and accuracy. HT310L fits every HPLC system, and its direct syringe injection minimizes dead volume, reduces carry-over and improves repeatability. Full and partial loop are both performed with very accura…
Making a dedicated and expensive GC-TOF-MS used infrequently for just a few samples a thing of the past. The GC-APCI II source enables GC coupling to any Bruker TOF or QTOF, trap or FTMS system originally designed for LC coupling.With its second generation GC-APCI source, Bruker offers the greatest flexibility and highest performance with a combined GC frontend and high-resolution MS system for confident ID of unknown compoun…
Fast and Simple Cleanup for Mycotoxin Analysis.The need for a quick, simplistic sample cleanup approach prior to chromatographic mycotoxin analysis has brought about SPE cartridges that significantly decrease sample prep time, increase reproducibility, and are more user friendly as compared to the industry standard immunoaffinity columns. In addition the Supel Tox SPE approach requires less equipment and fewer consumables.Unli…
A new generation of SPME products.The Fast Fit Fiber Assemblies were developed by Chromline srl Prato Italy in cooperation with Supelco expanding the applicability of SPME for rapid sampling and analysis using multiple fiber assemblies. This product line is centered around the barcoded SPME Fast Fit Assemblies that can be automatically exchanged on a CTC CombiPAL type autosampler equipped with the Multi Fiber EXchanger (MFX) s…
BIOshell™ A160 Peptide C18, 2.7 μm HPLC Columns BIOshell A160 Peptide C18 columns packed with 2.7 μm particles, 160 Å pores, are as efficient as sub-2-μm porous particles, but at ½ the backpressure.These columns can be operated long term at pressures up to 600 bar (60 MPa or 8500 psi), temperatures up to 90 °C and within the pH range of 1 to 8. BIOshell A160 Peptide C18 columns can be run on all HPLC systems including UHPLC s…
“QuEChERS” (Quick, Easy, Cheap, Effective, Rugged, and Safe) - Supel™ QuE PSA Tube, pk of 50, suitable for EN 15662:2008 per BSDispersive SPE (dSPE), often referred to as the "QuEChERS" method, is an emerging sample prep technique that is becoming increasingly popular in the area of multi-residue pesticide analysis in food and agricultural products. In dSPE, food/agricultural samples are first extracted with aqueous miscible…
