Spectroscopy Products & Reviews

Visible Spectrophotometer ideal for quality control in analytical or industrial laboratories where a high specification instrument and a wide choice of accessories are required. Features Basic routines (Absorbance, %Transmission, Concentration & Ratio) plus scanning, kinetics and standard curve capabilities Store methods Automatic system calibration Customize both the start-up menu and the accessible methods Lamp s…

SEQUEST Cluster is a complete, preconfigured proteomics solution that enables accelerated throughput of increasingly complex, multidimensional informatics.Product detail:The SEQUEST Cluster offers a scalable solution for computing the large volumes of data typical in most proteomics analyses using LC/MS. Protein database search times are dramatically reduced by harnessing the power of several processing units in one, increasin…

DeNovoX software automates and accelerates sequencing, returning results equal to or better than those formerly achieved through expert manual sequencing of peptides within proteins and is ideally suited for high-throughput analyses of peptide mixtures. Product detail: DeNovoX is a fully-automated de novo sequencing software program that is capable of determining complete or partial amino acid sequences of unknown peptide…

LCquan 2.0 enabling 21 CRF Part 11 compliance. LCQUAN 2.0 is a closed, secure, multi-level user environment for mass spectral quantitative analysis. When LC Quan 2.0 is used in conjunction with Thermo's electronic Record Manager (eRM), this powerful combination provides the user with a completely secure data archival solution. Product detail: LCQUAN 2.0: Quantitation for the regulated laboratories Companies in regulated i…

Brimrose Solid-state AOTF-NIR Process Analyzers are designed for measuring the chemical and physical properties of liquids, solids, powders, gels, etc. in a real production environment, in any classified area by using variety of Probes, Flow cells, attachments, etc. Dual beam, pre-aligned lamp assembly, InGaAs detectors, Hoffman stainless steel enclosure, embedded computer, modem, ethernet interface, SNAP!TM Brimrose analytica…

HORIBA Scientific is supplying its own range of standards as well as SPEX CertPrep standards. In consequence HORIBA Scientific proposes a complete range of Certified Standards Samples specifically for Sulfur in Oil analysis, as well as many other components in all kind of hydrocarbon matrices. The three basic sets are dedicated to the most famous analytical methods of sulfur in oil analysis. The calibration is very simple and…

C7040 & C7041 are high sensitivity multichannel detector heads for use with black-thinned FFT-CDD image sensors that offer high UV sensitivity and quantum efficiency.

DATAN 3.0OverviewWith DATAN 3.0 characterization of chemical equilibria and chemical reactions becomes easy. DATAN exploits the great advantage of collecting entire spectra and even higher order experimental data when studying chemical samples. Behind a user friendly interface state of the art algorithms, several of which are proprietary to MultiD, are used to extract chemical information about the samples with minimum assumpt…

Sterivac vacuum-driven filter units are ideal for bottle-top filtering directly into receiver flasks at flow rates as fast as 1.5 L/min. The unique "start & stop" filtration action makes setting up, filtering and transferring the unit to another receiver fast and easy. Push a button to stop filtering, move the device to an empty bottle and restart

• Concentrating and desaltingchromatography column eluates• Concentrating monoclonal antibodies• Concentrating proteins or viruses from culture supernatants• Clarifying tissue homogenates and cell lysates• Buffer exchange or diafiltration

High recovery Durapore (PVDF) and hydrophilic PTFE membranesFive different pore sizes from 0.1 to 5.0 µmPre-sterilized units also availableFast filtration and highly reproducible performanceUse in fixed-angle rotors for 15 mL tubes

Easy, pre-sterilized, centrifugal sample clarification units for either 0.5 mL (MC) or 2 mL (CL) maximum volumes.High recovery Durapore (PVDF) membraneFast filtration and highly reproducible performanceUse in fixed-angle rotors for 1.5 mL tubes (MC) or 15 mL tubes (CL)

Montage Antibody Purification Kits are designed for fast and easy antibody purification from serum, ascites or cell culture supernatants. The kits include spin columns pre-packed with high capacity PROSEP-A or G media. There are no pumps to setup. No columns to pack. All you need is a centrifuge to purify 10–20 mg in less than 60 minutes.The protocol is easy to follow and, unlike traditional gravity flow methods, the use of ce…

Concentrates 2 mL down to 15-70 µL 98% sample recovery Fast processing time - 10 to 30 minute spin times Engineered dead stop Reverse spin capability provides consistent recoveries

Automation compatible filter units from EMD Millipore are specially designed to provide efficient filtration for dissolution and other automated sample preparation applications.Choice of Filter Media: Automation compatible filter units are available in a variety of membrane types and pore sizes, including units with prefilters for particulate-laden samples.Automation Compatible Packaging: The 200 pack comes preassembled in 8 t…

Millex filter units with hydrophobic Fluoropore membrane are ideal for sterilizing gases, venting sterile containers, and sterilizing or clarifying organic solutions. Specialized filter units protect hemodialysis transducers from blood and moisture. 50 mm Millex filter units are also used for vacuum line protection. All units are bi-directional

Sample preparation for ion chromatography

Filter particle-laden or viscous samples

This 13 mm syringe filter with a Hydrophilic Polyethersulfone membrane, for non-sterile filtration, has a 0.45 micron pore size used in preparation of aqueous & mild organic solutions prior to chromatography or other instrument analyses.

Millex-GP Filter for Samplicity G2, 0.22 µm, PES 33 mm, non-sterile

The solid phase extraction (SPE) workstation can be used on Xiril pipetting workstations for automated nucleic acid purification based on vacuum technology. All pipetting steps of several different nucleic acid purification kits can be automated on a Xiril liquid handling workstation. Xiril’s very space saving SPE vacuum station comprises two positions, one in the front for washing steps and another in the back for the elution…

The magnetic bead separation device Magnetic PlateX can be used with a Xiril pipetting workstation for automated nucleic acid purification based on the magnetic beads technology. Speed up the process of nucleic acid purification with a magnetic beads kit using the Magnetic PlateX on a Xiril robotic workstation. All pipetting steps are taken over by the robot and the plate gripper “Plate GripX” automatically carries out the tra…

The Tube-ScanX LR is the new scanner for the automated reading of barcodes on tubes on a Xiril liquid handling robotic workstation. The barcode scanner “LR” is equipped with a laser reader for a fast record of all barcodes on tubes without interruption while reading. The laser camera with autofocus is mounted fix on the worktable. It doesn’t have to be moved whereas the tube holding racks are drawn with two of the pipetting ad…

The Plate-ScanX enables microplate identification for data tracking in an automated liquid handling process on a Xiril robotic workstation. Xiril’s plate scanner device allows reading of 1D and 2D barcodes on the side of microplates. The plate gripper of the Xiril liquid handling workstation picks up the plate and presents it in front of the barcode scanner camera.