Labware Products & Reviews

These 85 mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from accidental damage by the vapor tube. The unit has a 24/40 inner Standard Taper joint and a 45/50 outer Standard Taper joints at the top and bottom. For glass extraction thimbl…

These 50 mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from accidental damage by the vapor tube. The unit has a 24/40 inner Standard Taper joint and a 34/45 outer Standard Taper joints at the top and bottom. For glass extraction thimbl…

These 500 mL PYREX® Soxhlet extractors have a bulb in siphon tube near the top of tube to facilitate cycling of the siphoning action. PYREX® extraction thimbles, paper filters or glass wool are used to support the sample. The siphon tube is protected from accidental damage by the vapor tube. The unit has a 29/42 inner Standard Taper joint and a 71/60 outer Standard Taper joints at the top and bottom. For glass extraction thimb…

This is a 1L PYREX® replacement flask with a 29/42 outer Standard Taper joint for the No. 3840-XL 1L extractor system. The tubulation O.D. on the condenser is 10mm.

This 500 mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 55/50 outer Standard Taper joint on the top, an Allihn condenser with a 55/50 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 4100…

This is a PYREX® replacement Allihn condenser with a 55/50 inner Standard Taper joint on the bottom for the No. 3840-L 500 mL extractor system. The tubulation O.D. on the condenser is 10mm.

This 250 mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 45/50 outer Standard Taper joint on the top, an Allihn condenser with a 45/50 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 4100…

This is a PYREX® replacement Allihn condenser with a 45/50 inner Standard Taper joint on the bottom for the No. 3840-M 250 mL extractor system. The tubulation O.D. on the condenser is 10mm.

This 125 mL PYREX® extractor system consists of a Soxhlet extractor with 24/40 inner Standard Taper joint on the bottom and a 34/45 outer Standard Taper joint on the top, an Allihn condenser with a 34/45 inner Standard Taper joint on the bottom and a flask with a 24/40 outer Standard Taper joint. The tubulation O.D. on the condenser is 10mm. For replacement Soxhlet extractors, see No. 3740. For replacement flasks, see No. 4100…

This is a PYREX® replacement Allihn condenser with a 34/45 inner Standard Taper joint on the bottom for the No. 3840-S 125 mL extractor system. The tubulation O.D. on the condenser is 10mm.