Electrophysiology is the study of biological voltage changes, from a single ion channel through to a whole organ scale. Voltages can be measured using patch clamping, automated workstations, electrophysiology rigs or cell based assays. Specific cell lines, manipulators and microinjectors are also available for electrophysiology research.
Bandwidth of 0.1Hz -10 kHz allows users to record several types of extracellular potentials. • Low-cut filter (High pass filter) with 0.1, 1, 10, and 100Hz cutoff. • High cut filter (Low pass filter) with 1, 2.5, 5, 7.5, and 10kHz cutoff. • Built-in 2-channel stimulator allows users to program and deliver complex stimulation sequences independently through any 2 electrodes. • USB connection to computer.SpecificationsHead Ampl…
Computer-controlled microelectrode current-clamp and voltage-clamp amplifier, useful for a wide range of intracellular microelectrode recording techniques with several modes of operation: two independent current clamp amplifiers with bridge balance, two-electrode voltage clamp, discontinuous current clamp, discontinuous single-electrode voltage clamp, and high-voltage current clamp. Axoclamp 900A is shipped with the following…
Premier patch-clamp amplifier for all patch-clamp configurations, with capacitive-feedback and cooling in the headstage for ultra-low noise single-channel recordings. Axopatch 200B is shipped with the following,o Axopatch 200B amplifiero CV-203BU headstage (Part number 1-CV 203BU)o US Power cord (Part number 1-3010-0011)o European power cord, CEE7/7 (Part number 1-3010-0013)o Accessory kit (Part number1-2050-0301) containing:…
Finally, a culture dish system specifically designed for live-cell microscopy! Now you can have accurate temperature control and high numeric aperture compatibility in a convenient disposable culture dish system compatible with all modes of microscopy. Never before has there been so many capabilities integrated into a specimen control system. • Easily adapted to a variety of specimen types from monolayered adherent cells to t…
Chamber, Controller, 5 Microaqueduct slides, 30 piece gasket set, 50 - #1.5 coverslips. The Objective Heater and Objective Heater Controller is optional (needed for use of high numeric aperture objectives). The objective heater is mounted to the upper end of the central retracting tube of the objective. The standard size fits diameters between 17 and 28mm. The medium size fits diameters between 23 and 29mm. There is also a la…
A closed system, parallel plate, micro-environmental chamber for upright microscopes. The FCS3 provides the user with all of the functionality of the popular FCS2 but redesigned for upright microscopes. Therefore, you have the following attributes in one easy to load and use chamber:•Suitable for no flow through high rate flow procedures where a rapid exchange of media is required with low cell surface shear•Cell temperature c…
Brief pulses of electricity are used in various biomedical research applications as a stimulus to excite nerve or muscle fibers. Several factors need to be considered when choosing the right stimulator.The DS2A Mk.II provides a precise Constant Voltage stimulus (up to 100V) controllable in Pulse Duration and Amplitude from self-contained batteries, making it ideally suited to electrophysiological recording in small preparation…
Brief pulses of electricity are used in various biomedical research applications as a stimulus to excite nerve or muscle fibers. Several factors need to be considered when choosing the right stimulator.The DS3 provides a precise Constant Current stimulus (up to 32mA) controllable in Pulse Duration and Amplitude and as with the DS2A this output comes from self-contained batteries. The DS3 also features a "clamp" or discharge c…
The DS4 takes an analogue voltage waveform defined within your own data acquisition/ control system and converts it into an isolated constant current stimulus. The DS4 will accept several input voltage ranges and produces four output ranges (±10µA, ±100µA, ±1mA and ±10mA). It also features a GATE input, so that several DS4 units can be controlled by a single analog waveform, but enabled individually via this GATE input. A t…
The ITC-18 is the second-generation low-noise 16-bit computer interface from Instrutech Corporation. The ITC-18 offers unsurpassed capability while retaining all of the exceptional features of its predecessor, the ITC-16. The ITC-18 provides a major improvement in the quality of acquired data, making measurements that would otherwise not be possible.* All synchronous analog and digital channels are optically isolated* Eight si…
