Microplates Products & Reviews

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

Evenly applies film on flat top plates.

Texan reagent reservoirs are reusable - an environmentally sound alternative to disposable reagent reservoirs. Their extra-large capacity means fewer refills and time saved. The V-shaped basin is compatible with both eight and twelve-place multiple pipettors with minimal reagent waste. Lids are removable - attached with ball and socket hinges - and latch tightly for secure storage of left-over reagents. With lids c…