Mills, Sieves and Presses Products & Reviews

The smallest instrument for small quantities

WIN IN EFFICIENCY, AUTOMATION, SPEED & SAFETY WITH OUR NEW SAMPLE PREPARATION DEVICES HORIBA Scientific offers a great range of possible solutions for our analyzers, to save time and ensure that the end results are as accurate as possible! Whatever your analytical solutions: ICP-OES, ICP-MS, AA, Fluorescence X, elemental analyzers, etc.… HORIBA Scientific can provide you with many sample preparation devices, such as: • Grinder…

Ideal for smallest quantities

These hand-driven 40 mL PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the bottom of the unground glass tube (mortar) is .8475 Use the large clearance A pestle for initial reduction of soft tissue. The diameter of the ground and poli…

These hand-driven 7 mL PYREX®; tissue grinders are supplied with two pestles to ensure dissociation of cells into fine particles with minimal damage to cell nuclei. Particularly useful in enzyme studies where heat build-up must be avoided. The internal diameter at the bottom of the unground glass tube (mortar) is .435 Use the large clearance A pestle for initial reduction of soft tissue. The diameter of the ground and polish…

These 1 mL PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.

These 5 mL PYREX® tissue grinders are designed to handle both initial grinding and final homogenization in the same sequence of operations. The lower conical section is intended primarily for the initial grinding. To assist in this work the clearance between mortar and pestle can be adjusted at will by raising or lowering the pestle. The upper cylindrical section is for the final homogenization.

These 1 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If us…

These 17 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If u…

These 3 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If us…

These 5 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If us…

These 8 mL capacity PYREX® Potter-Elvehjem tissue grinders (homogenizers) are used in preparing small samples for pathological and biochemical studies. Homogenization occurs as the sample and buffer are forced through the cylindrical portion of the mortar as the pestle is rotated downward. Mortar is not ground and the pestle contact surface is Polytetrafluorethylene (PTFE), threaded onto a stainless steel shaft. Caution: If us…

These 15 mL capacity PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The catch basin bulb has a 35mm outer diameter. The pestle takes a No.1 rubber stopper. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action to deliver well homogenized sampl…

These 2 mL capacity PYREX® homogenizers are designed for use in hand grinding small samples for pathological or biochemical studies. The catch basin bulb has a 20mm outer diameter. The pestle takes a No. 00 rubber stopper. The mortar tubes and pestles are ground to be interchangeable. Clearance between the two parts is approximately 0.15mm. The medium grind provides the required abrasive action to deliver well homogenized samp…

Fast pre- and fine-grinding in one instrument

Fast, contamination free grinding below 1 micron. Handles sample volumes from 1 ml up to 4 x 225 ml.

In contrast to conventional Planetary Mills, the rotational speed of the grinding bowls and supporting disk can be configured separately in the Vario-Planetary Mill PULVERISETTE 4 classic line with 2 working stations. Your advantage: A single mill for mechanical activating and alloying providing optimum grinding conditions suited to the respective material to be ground and the size of the grinding bowls and balls! For resul…

VANEOX pressing system: automatic and manual

Homogenize samples with binder in pressed pellet preparation

Multifunctional, Industrial-Grade Mill 

The Mini-Beadbeater-16 is a high-energy cell disrupter designed to handle four to sixteen samples at a time.

The Mini-Beadbeater-Plus™ is an upgraded version of the venerable Mini-BeadBeater-1.  Improvements include a programmable timer, a powerful brushless motor and 115/230 VAC compatibility. The high-energy bead-mill rapidly and completely disrupts microorganisms and plant and animal tissue.

The BioPulverizer quickly fragments hard frozen tissue samples into tiny pieces the size of grains of sand or course powder. The primary benefit of pulverizing pieces of tissue is to optimize subsequent rapid and complete cell lysis using lytic solutions or mechanical homogenizers. For difficult tissues such as tendon, skin, and tumors it is an essential step (read more). The BioPulverizer is also used at room temperature to…

BioSpec Lysis Beads come in a variety of materials, sizes, and durability to dry grind or wet mill various types of samples. See detailed description for specific bead recommendations. Materials: Chrome-Steel, Stainless-Steel, Glass, Zirconia-Silica, Zirconia, Garnet, and Tungsten Carbide.

Small and efficient