Microplate Accessories Products & Reviews

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

X-Pierce film is designed for resealability and easy access without pipet tip coring or adhesive fouling.

Zone-Free is a multilayer film with pierceable, adhesive-free zones to help minimize potential contact between samples and adhesive.

Effective adhesive seal prevents evaporation during reaction and storage Can be removed from plate without leaving any residue Autoclavable (121°C, 20 min.) Certified free of human DNA, DNase, RNase and PCR Inhibitor*1 PCR Film, adhesive Sample can be visually monitored through the transparent film PCR Foil, adhesive Easy to pierce Pipette tip does not become tacky (ideal for automated systems) *1 Certifi…

J.G. Finneran's EZ-Pierce 96-Well Template Sealing FilmJ.G. Finneran offers sealing films designed for microplates where well to well contamination and cross over is of critical concern.  Our easy piercing film allows for direct sample recovery with a mulit-channel pipettor or robotic probes.  No longer is there a need to peel back the film in order to access the wells and risk aerosols and possible contamination and cross-ove…

J.G. Finneran's Sealing Mats for 96-Well MicroplatesJ.G. Finneran's molded Teflon/Silicone and Silicone only Sealing Mats are designed to fit standard 96-well microplates with cylindrical or tapered wells, and square wells.  The tight seal prevents sample cross contamination and the liner reseals after multiple injections thus reducing the chance of solvent evaporation.  The liners are made from Teflon lined medical grade sili…

Lids are made of rigid polystyrene Lids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplates Lids do not fit Corning 2 µL 1536 well microplates or 2 mL 96 well storage blocks Sterilized by gamma radiation

A 38µm soft non-permeable aluminum foil sealing film with strong medical grade adhesive, AlumaSeal II™ sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Compared to other aluminum foils, AlumaSeal II™ has less tendency to roll back on itself when removing the backing paper and conforms well to the plate during applications. •   Easily pierceable with single or multi-channel pipettors and…

Lids are made of rigid polystyreneLids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplatesSterilized by gamma radiation

The REMP Portrait Heat Sealer is a completely electro-mechanical, thermal sealing instrument that does not require any air or vacuum to operate. This versatile and efficient instrument accommodates deepwell, assay, PCR, and standard microplates with only a minor adapter change. The REMP Portrait Heat Sealer uses any of the various rolls of REMP’s Thermo-Seals, most of which are resistant to DMSO, as well as, other solvents and…

Alternative sealing method for 96-well plates Multiple-use Autoclavable (121°C, 20 min.) Certified free of human DNA, DNase, RNase and PCR Inhibitor*1 *1 Certificate, test procedures and detailed information on request.

Product features Hermetic heat-sealing of microtiter plates Optimum elimination of evaporation in PCR, avoiding cross-contamination Ideal for transporting and storing samples Seals 96 and 384-well plates; suitable for plates of different heights Suitable for plates of different heights Optimum sealing with Eppendorf Heat Sealing Foils and Films at a preset temperature Compact design, portable device Integrated…

Application The MagNA Pure LC Cartridge Seal is an adhesive film used for sealing the MagNA Pure LC Sample Cartridge for storage purposes. The Cartridge Seals can be used at –80 to +37°C. To obtain a single sample without exposing others, simply cut through the cartridge seal of the desired well, then reseal the cartridge with a new Cartridge Seal. Quality The disposable plastics for the MagNA Pure LC Instrument meet stringe…

The MicroClime® environmental lid incorporates a novel, fluid-absorbing matrix that minimizes edge effects and preserves the concentrations of solutions in microplate wells. The absorbed fluid creates a vapor barrier that protects the sample from the exterior environment and from evaporation, greatly reducing edge effects. The MicroClime lids also eliminate edge effects which might occur due to long-term cell incubation, such as…

Tinted amber for light-sensitive assays These standard height lids are made of cyclic-olefin which is 100% DMSO-resistant Lids do not fit Corning 2 µL 1536 well microplates Nonsterile

Combines the sealing ability of a storage mat with the rigidity of a plastic lid Designed for repeated application and removal by automation and to prevent short-term evaporation Silicone sealing plugs for organic solvent resistance and low extractables Can be used manually or with automation Nonsterile

Provides for adequate gas exchange while maintaining a sterile barrier Fits all 96 and 384 well microplates and polypropylene blocks Certified DNase- and RNase-free

A modified Transwell permeable support containing a 12mm diameter 0.4 µm pore polycarbonate membrane supported by a detachable ring Once cells are grown to confluence on the Snapwell insert, the ring can be placed in a vertical or horizontal diffusion chamber. [Diffusion Chambers are available through Harvard Apparatus (www.harvardapparatus.com)] Packaged in 6 well plates

These 15mm diameter Netwell inserts have 74µm polyester mesh bottoms attached to polystyrene rings or housing They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of tissue slices (sold separately) Provides coarse filtration of tissue homogenates, cell suspensions and microcarr…

These 15mm diameter Netwell inserts have 440µm polyester mesh bottoms attached to polystyrene rings or housing They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of tissue slices (sold separately) Provides coarse filtration of tissue homogenates, cell suspensions and microcar…