Labware Products & Reviews
Labware
Selected Filters:
PYREX® 200 mm Graham Condensers with Top and Bottom 19/38 Standard Taper Joints
Corning Life SciencesSecure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks)Nonpyrogenic tested to less than 0.1 EU/ mLVolumetric graduations and writing patchGrowth area and volume are nominal
PYREX® 300 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints
Corning Life SciencesThese PYREX® Graham condensers have a high surface area per unit length of the 300mm long jacket with a 24/40 Standard Taper outer joint at the top and a 24/40 Standard Taper inner joint at the bottom with a drip tip. They are primarily used in vacuum distillations. Condenser tubulations are approximately 10mm O.D.
PYREX® 400 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints
Corning Life SciencesSecure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks)Nonpyrogenic tested to less than 0.1 EU/ mLVolumetric graduations and writing patchGrowth area and volume are nominal
PYREX® 500 mm Graham Condensers with Top and Bottom 24/40 Standard Taper Joints
Corning Life SciencesSecure stacking provides stability from accidental tips or spills, and protection against contamination (canted neck flasks)Nonpyrogenic tested to less than 0.1 EU/ mLVolumetric graduations and writing patchGrowth area and volume are nominal
PYREX® West Condensers, Drip Tip, with 14/20 Standard Taper Outer and Inner Joints
Corning Life SciencesThese PYREX West condensers are designed with a 190 mm long jacket that has a Standard Taper top joint. The bottom has Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tabulation O.D. is approximately 10mm.Cat No. 2705-19 is a replacement part for organic chemistry kits (Cat. Nos. 6949 through 6949K).
PYREX® West Condensers, Drip Tip, with 19/22 Standard Taper Outer and Inner Joints
Corning Life SciencesThese PYREX® West condensers are designed with a 190mm long jacket that has a 19/22 Standard Taper top joint. The bottom has 19/22 Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tubulation O.D. is approximately 10mm. This condenser is a replacement part for organic chemistry kit No. 6949E.
PYREX® 300 mm West Condenser, Drip Tip, with 24/40 Standard Taper Outer and Inner Joints
Corning Life SciencesThese PYREX West condensers are designed with a 190 mm long jacket that has a Standard Taper top joint. The bottom has Standard Taper inner joint with a drip tip. The tubulations are on the same side to reduce breakage. The tabulation O.D. is approximately 10mm.Cat No. 2705-19 is a replacement part for organic chemistry kits (Cat. Nos. 6949 through 6949K).
PYREX® 2.4L Small Knob Top Desiccator
Corning Life Sciences(This is the suggested replacement for 3078-160)This 2.4L PYREX® desiccators is designed for general analytical work. The sturdy knob makes the cover easy to handle. Approximate bowl volume is 2400 mL. For replacement cover, see No. 3081-150CO. For lower part only, see No. 3081-150LO.Warning: Do not heat or subject to pressure. Not for vacuum applications.
PYREX® Replacement Cover for 2.4L Small Knob Top Desiccator
Corning Life SciencesThese PYREX® desiccator covers are replacements for No. 3081-150 2.4L desiccators. The sturdy knob makes the cover easy to handle.Warning: Do not heat or subject to pressure. Not for vacuum applications.
PYREX® Replacement Bowl for 2.4L Small Knob Top Desiccator
Corning Life SciencesThese PYREX® desiccator bowls are replacements for No. 3081-150 2.4L desiccators. Approximate bowl volume is 2400 mL.Warning: Do not heat or subject to pressure. Not for vacuum applications.
PYREX® 5.8L Large Knob Top Desiccator
Corning Life Sciences(This is the suggested replacement for 3080-200)This 5.8L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 5800 mL. For replacement cover, see No. 3081-200CO. For lower part only, see No. 3081-200LO.Warning: Not for vacuum applications. Do not heat or subject to pressure.
PYREX® Replacement Cover for 5.8L Desiccator
Corning Life SciencesThese PYREX® desiccator covers are replacements for 5.8L desiccators No. 3081-200. The large sturdy knob makes the cover easy to handle.Warning: Not for vacuum applications. Do not heat or subject to pressure.
PYREX® Replacement Bowl for 5.8L Large Knob Top Desiccator
Corning Life SciencesThese PYREX® desiccator bowls are replacements for 5.8L desiccators No. 3081-200. Approximate bowl volume is 5800 mL.Warning: Do not heat or subject to pressure. Not for vacuum applications.
PYREX® 10.5L Large Knob Top Desiccator
Corning Life Sciences(This is the suggested replacement for 3080-250)This 10.5L PYREX® desiccators is designed for general analytical work. The large sturdy knob makes the cover easy to handle. Approximate bowl volume is 10,500 mL. For replacement cover, see No. 3081-250CO. For lower part only, see No. 3081-250LO.Warning: Not for vacuum applications. Do not heat or subject to pressure.
PYREX® Replacement Cover for 10.5L Desiccator
Corning Life SciencesThese PYREX® desiccator covers are replacements for 10.5L desiccators No. 3081-250. The large sturdy knob makes the cover easy to handle.Warning: Not for vacuum applications. Do not heat or subject to pressure.
PYREX® Replacement Bowl for 10.5L Large Knob Top Desiccator
Corning Life SciencesThese PYREX® desiccator bowls are replacements for 10.5L desiccators No. 3081-250. Approximate bowl volume is 10500 mL.Warning: Do not heat or subject to pressure. Not for vacuum applications.
PYREX® 2.4L Small Top Desiccators with 24/29 Standard Taper Stopcock
Corning Life Sciences(This is the suggested replacement for 3118-160)This 2.4L PYREX® desiccators has a rugged 24/29 Standard Taper external sleeves with tooled hose connections that serve as the stopcock. It is designed so that its manipulation is not affected by the vacuum. To introduce vacuum into the desiccator, loosen the stopcock to disengage the PTFE plug from contact with the glass. A half turn from this position closes the desiccator. Thi…