Microplate Accessories
Lids are made of rigid polystyrene Lids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplates Lids do not fit Corning 2 µL 1536 well microplates or 2 mL 96 well storage blocks Sterilized by gamma radiation
A 38µm soft non-permeable aluminum foil sealing film with strong medical grade adhesive, AlumaSeal II™ sealing films eliminate the need for heat-sealing devices or mats during thermal cycling. Compared to other aluminum foils, AlumaSeal II™ has less tendency to roll back on itself when removing the backing paper and conforms well to the plate during applications. • Easily pierceable with single or multi-channel pipettors and…
Lids are made of rigid polystyreneLids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplatesSterilized by gamma radiation
The REMP Portrait Heat Sealer is a completely electro-mechanical, thermal sealing instrument that does not require any air or vacuum to operate. This versatile and efficient instrument accommodates deepwell, assay, PCR, and standard microplates with only a minor adapter change. The REMP Portrait Heat Sealer uses any of the various rolls of REMP’s Thermo-Seals, most of which are resistant to DMSO, as well as, other solvents and…
Application The MagNA Pure LC Cartridge Seal is an adhesive film used for sealing the MagNA Pure LC Sample Cartridge for storage purposes. The Cartridge Seals can be used at –80 to +37°C. To obtain a single sample without exposing others, simply cut through the cartridge seal of the desired well, then reseal the cartridge with a new Cartridge Seal. Quality The disposable plastics for the MagNA Pure LC Instrument meet stringe…
The MicroClime® environmental lid incorporates a novel, fluid-absorbing matrix that minimizes edge effects and preserves the concentrations of solutions in microplate wells. The absorbed fluid creates a vapor barrier that protects the sample from the exterior environment and from evaporation, greatly reducing edge effects. The MicroClime lids also eliminate edge effects which might occur due to long-term cell incubation, such as…
Tinted amber for light-sensitive assays These standard height lids are made of cyclic-olefin which is 100% DMSO-resistant Lids do not fit Corning 2 µL 1536 well microplates Nonsterile
Combines the sealing ability of a storage mat with the rigidity of a plastic lid Designed for repeated application and removal by automation and to prevent short-term evaporation Silicone sealing plugs for organic solvent resistance and low extractables Can be used manually or with automation Nonsterile
Provides for adequate gas exchange while maintaining a sterile barrier Fits all 96 and 384 well microplates and polypropylene blocks Certified DNase- and RNase-free
A modified Transwell permeable support containing a 12mm diameter 0.4 µm pore polycarbonate membrane supported by a detachable ring Once cells are grown to confluence on the Snapwell insert, the ring can be placed in a vertical or horizontal diffusion chamber. [Diffusion Chambers are available through Harvard Apparatus (www.harvardapparatus.com)] Packaged in 6 well plates
These 15mm diameter Netwell inserts have 74µm polyester mesh bottoms attached to polystyrene rings or housing They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of tissue slices (sold separately) Provides coarse filtration of tissue homogenates, cell suspensions and microcarr…
These 15mm diameter Netwell inserts have 440µm polyester mesh bottoms attached to polystyrene rings or housing They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of tissue slices (sold separately) Provides coarse filtration of tissue homogenates, cell suspensions and microcar…
These 24mm diameter Netwell inserts have 74µm polyester mesh bottoms attached to polystyrene to rings or housing They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of tissue slices (sold separately) Provides coarse filtration of tissue homogenates, cell suspensions and microc…
These 24mm diameter Netwell inserts have 440µm polyester mesh bottoms attached to polystyrene to rings or housing They are used as tissue carriers, supports and strainers for culture of small organs, tissue slices or explants at the air-media interface Handy carriers are available for immunocytochemical staining of tissue slices (sold separately) Provides coarse filtration of tissue homogenates, cell suspensions and micro…
These specially designed Netwell carriers and handles allow simultaneous processing of up to 12 Netwell inserts per carrierEach carrier kit contains eight carriers and eight handles
These specially designed Netwell carriers and handles allow simultaneous processing of up to 6 Netwell inserts per carrierEach carrier kit contains eight carriers and eight handles
A modified Transwell permeable support containing a 12mm diameter 0.4 µm pore polyester membrane supported by a detachable ring Once cells are grown to confluence on the Snapwell insert, the ring can be placed in a vertical or horizontal diffusion chamber. [Diffusion Chambers are available through Harvard Apparatus (www.harvardapparatus.com)] Packaged in 6 well plates
Suitable for fluorescent and other light-sensitive assays Lids are made of rigid polystyrene Lids have a corner notch on the A1 corner to correspond to the corner notches found on all Corning® microplates Lids do not fit Corning 2 µL 1536 well microplates Sterilized by gamma radiation
Uniform adhesive provides an effective well-to-well sealing across the entire microplate to eliminate the edge effect in sensitive ELISA assays. Suitable for sealing tissue culture microplates, for short term storage incubation, for transport, and the containment of solutions(This is the suggested replacement for 3095)Easy application and removal for both short- and long-term storageIdeal for ELISA,general incubation, and othe…
Polyethylene sealing tapes for 96 well plates prevent evaporation and enable oil-free operation when used with thermal cyclers with heated lids Easy application and removal for short- and long-term storage
High optical quality allows use for detection coupled with PCR systems such as real time PCR Pressure-sensitive tape ensures tight sealing to minimize evaporation and enables oil-free operation when used with thermal cyclers with heated lids Ideal for microscopic observation of protein crystals Suitable for use between -70 and 100 degrees C Compatible with commonly used aqueous solutions and organic solvents
Polystyrene Lid for 384-well and 96-well Falcon® Microplates with 120µl total well capacity. 6mm polystyrene, for 96 and 384 well microplates, non-sterile. 5/bag, 100/case(This is the suggested replacement for 353836)Shipping:Drop ship with no penaltyStorage: Ambient storage conditions; Shelf life: Indefinite.Ideal for use in high throughput systems
(This is suggested replacement for 354801.)This integrated, automation-friendly cell environment promotes the rapid differentiation of Caco-2 cells in vitro for robotic screening of prospective pharmaceuticals for oral bioavailability and absorption. May be used with Falcon® 24-well Plates, available separately.FeaturesTime Savings: Unique fibrillar collagen-coated inserts used with our specialized media speed up the different…
Axygen® AxyMats™ sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. Made of research-grade silicone, they can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused.Pierceable Sealing MatFor use with 24 well deep well plates
Axygen® AxyMats™ sealing mats minimize evaporation in a wide range of temperatures in PCR and storage applications. Made of research-grade silicone, they can be autoclaved, and following a bleach wash and ethanol rinse protocol, they can also be reused.96 well Axymats™For assay and storage platesCompatibility: P-DW-11-C, P-DW-20-C, P-96-450V-C, P-96-450R-CFor use with 96 well deep well plates
