Shakers, Stirrers and Mixers Products & Reviews

Multitron Standard - Incubator Shaker For Microbial Applications 

The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or mix modes. A range of accessories are available for all common sample tubes and containers.Variable speed for gentle to vigorous mixingOptimized counter balance for minimal vibrationLightweight and portableIncludes cup head for all standard microtubes and…

The Corning variable speed LSE Vortex Mixer provides fast, efficient mixing with minimal vibration. The unit features a powerful, counter-balanced motor drive, continuous or mix modes. A range of accessories are available for all common sample tubes and containers.Variable speed for gentle to vigorous mixingOptimized counter balance for minimal vibrationLightweight and portableIncludes cup head for all standard microtubes and…

High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg) and operates on 120VAC 60Hz.

120mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4512 series vertical sidearm flasks.

This is a replacement power pack for Corning® Slow-Speed Stirrers (SS2L, SS10L, SS4R, SS4L and SS10R), Submersible Stirrers (IM75 and IM150) and Multiple Position Stirrers (MP4L, MP5L, MP9L and MP4R). It operates on 120V/60Hz and is UL approved to meet needs in North America and other locations with similar requirements.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 8L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 6L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 15L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 36L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

100mm Center Cap Assembly for Corning® Reusable Spinner Flasks is designed for use with direct overhead drive motor. These cap assemblies required optional 8L, 15L or 36L paddle assemblies and can be used on all 4500 and 4510 series vertical sidearm flasks.

High torque, low rpm stirrer motor specifically designed to maintain constant low speed for use on top of Corning® Reusable Spinner Flasks. The gearhead stirrer motor delivers 14.5 in-lbs of torque and has a maximum speed of 350 rpm. The weight of the motor is 9 lbs (4.1kg) and operates on 230VAC 50Hz.

Stainless steel impeller shaft with dual bearing, modified impeller assembly for use in magnetically driven, 3L Corning® Reusable Spinner Flasks. Narrower impeller paddle design allows use with probes to create a small bioreactor.

These 7/16 x 24 inch stainless steel support rods screw into the base of Corning® PC-600/610/620 series hot plate/stirrers.

This Corning® slow-speed stirrer has one position with integral controls that can accommodate up to a ten-liter vessel. It is designed to be use with Corning® glass and plastic spinner flasks to provide optimum stirring speeds for both good mixing and high cell viability. It operates on 120V/60Hz. A compact design saves valuable bench space and offers powerful stirring from 10 to 150 rpm. Yet its economical features (just one…

This Corning® four position stirrer has integral controls that can accommodate up to four one-liter vessels. It operates on 120V/60Hz. Compact design saves valuable bench space Offers powerful stirring from 350 to 2000 rpm. Rugged lightweight glass filled resin case Two-year warranty

This Corning® five position stirrer has integral controls that can accommodate up to five 400 mL vessels. It operates on 120V/60Hz. Compact design saves valuable bench space Offers powerful stirring from 350 to 2000 rpm. Rugged lightweight glass filled resin case Two-year warranty

This Corning® nine position stirrer has integral controls that can accommodate up to nine 250 mL vessels. It operates on 120V/60Hz. Compact design saves valuable bench space Offers powerful stirring from 350 to 2000 rpm. Rugged lightweight glass filled resin case Two-year warranty

This is an optional head, 3 inch, for processing larger numbers of tubes, for use with Corning® LSE™ Vortex Mixer.

This is an optional head for 24 x 1.5/2.0 mL tubes, 24 x 0.5 mL tubes and 32 x 0.2 mL tubes or 4 tube strips, for use with Corning® LSE™ Vortex Mixer.

This is an optional head for 1 microplate or 64 x 0.2 mL tubes or 8 x 0.2 mL tube strips, for use with Corning® LSE™ Vortex Mixer.

This is an optional head for 8 x 15 mL and 8 x 12/13mm diameter tubes, for use with Corning® LSE™ Vortex Mixer.

This is an optional head attachment for 6 x 50 mL tubes, for use with Corning® LSE™ Vortex Mixer.

This is an optional head for 12 x 1.5/2.0 mL tubes, head horizontally, for use with Corning® LSE™ Vortex Mixer.

This is an optional head for 4 x 15 mL tubes, held horizontally, for use with Corning® LSE™ Vortex Mixer.