Voltammetry is a sensitive analytical technique for elemental detection. In a voltammeter the current is measured in the system whilst the voltage is varied. Usually 3 metal electrodes are required including the reference, auxiliary and working electrodes. In polarography, a subclass of voltammetry, the working electrode used is a dropping mercury electrode (DME). The 2 main types of voltammetry are cyclic and linear sweep voltammetry.
Conductivity measuring cells with SMEK plug head Shaft material: glass, 12 mm ¨ªConnection cable: e.g. LS 1 D8 (on CG 853(P) or handylab units) or LS 1 ST 4 LF (on predecessor models)Conductivity measuring cells with 1 m fixed cable with 8-pole plugShaft: 12 mm ¨ª (except LF 413-3 T: 15.3 mm)Temperature sensor: NTC 30…
The latest high per formance conductivity meters from SCHOTT Instruments were developed specifically for practical use in the laboratory. They are extremely easy to use, and offer maximum reliability and precision in all application areas. Routine work is facilitated by means of automated procedures.DisplayThe relevant data are easy to read on the large multifunction display. A sensor symbol indicates the status of the electro…
The handylab LF 11 and LF 12 portable conductivity meters in shock-proof, water-tight casings are ideally suited for field work. Measurement parameters The versatile conductivity meters can be used to measure electrical conductivity, total dissolved solids (TDS), salinity and temperature. Measurement memor y and interface In comparison with the handylab LF 11, the handylab LF 12 additionally has a data memory, which makes…
New in the VARIO family of WTW:The VARIO Cond has a lot to offer – at an excellent price. This economically designed meter is ideal for use in process control monitoring or anywhere a small, accurate meter is needed. The VARIO is small, light, handy, waterproof and has a robust firmgrip rubber armoring. Miniature precision, the VARIO Cond Sets:The VARIO Cond KIT with 4 electrodes conductivity cell: The globally renown measuri…
Looking for a portable but precise conductivity measurement to fulfil USP 27 regulations on pure water? For this purpose WTW, Weilheim, Germany, offers the Cond 340i, a precise hand held conductivity meter. It is a instrument including memory, datalogger and RS 232 interface with all features to perform conductivity measurements for every application. For USP measurements the temperature compensation can be switched off, a spe…
The P-2000 is designed as a customizable polarimeter with various options for arange of applications and budgetary requirements.The instrument system can also be field upgraded as application requirements change. Options such as polarizers, wavelength filters, lamps and photomultiplier detectors provide a wide range of analytical wavelengths from UV-Vis to NIR.
The FE280 is a basic, simple, routine instrument which allows conductivity to be measured across 4 ranges with full temperature compensation. The temperature coefficient is set at 2%/oC. Ideal for standard applications such as water quality measurements or spot checks on on-line equipment.
The automatic FE287 is much more than a conductivity meter. The related mesurement of resistivity and total dissolved solids are of course possible, but in addition, salinity and concentration measurements can be performed, making the meter one of the most flexible available. Six ranges of conductivity are possible and are selected automatically. Readings are displayed in multiples of S/cm or S/m.
The BA380 is a basic, bench conductivity meter. It measures conductivity only, using automatic temperature compensation and, despite its simplicity, affords the user measurements accurate to plus or minus 1%. The meter is calibrated to one point using traditional manual controls and a conductivity standard. Once the calibration is set, the user may select the appropriate range for the sample and read conductivity value directl…
