PYREX® Standard Taper 29/42 Stopper Assembly, 125 mL Gas Wash, Coarse
Corning Life SciencesStopper is equipped with a 12 mm diameter fritted cylinder instead of a disc as the distributor.
Labware and lab supplies include various forms of glassware, plasticware, reagents and personal protective equipment (PPE) and are used across all scientific laboratories, enabling daily tasks to be performed. Explore a range of flasks and beakers, petri dishes, carboys and storage bottles. Labware such as condensers, desiccators and burettes are also available for more specific tasks. Find the best labware and lab supplies in our peer-reviewed product directory: compare products, check customer reviews and receive pricing direct from manufacturers.
Stopper is equipped with a 12 mm diameter fritted cylinder instead of a disc as the distributor.
Axygen® 0.6 mL MaxyClear Microtubes are available in a variety of colors/ Sterile/ or in Maxymum Recovery. All Axygen Snaplock Microtubes have frosted cap surfaces for labeling, frosted panels on the side for writing, and a piercing port in the center of the cap.Will withstand up to 14,000 RCF Snaplock cap assures efficient sealThin membrane in cap center allows easy access to sample by syringe needleRNase-/DNase-free Nonpyro…
The Harvest 1L consumable is sized for the 1.0m2 FBR. It is provided with quick connectors allowing for easy aseptic connection to the the system and is used to collect product from the FBR, including both cell-expressed product and the cells themselves. The product includes a 1L Harvest Solution Bottle, 1L Waste Bottle, 250mL Flush Bottle & 1L Wash Bottle.
These flasks can be connected to the Ascent Fixed Reactor system using the pre-assembled aseptic connector. They can be used to harvest final products from the system in an entirely closed solution.
These flasks can be connected to the Ascent Fixed Reactor system using the pre-assembled aseptic connector. They can be used to harvest final products from the system in an entirely closed solution.
The Harvest 2L consumable is sized for the 2.5m2 bioreactor and 5.0m2 bioreactor. It is provided with quick connectors allowing for easy aseptic connection to the the system and is used to collect product from the FBR, including both cell-expressed product and the cells themselves. The product includes a 1L Harvest Solution Bottle, 1L Waste Bottle, 250mL Flush Bottle & 2L Wash Bottle.
These PYREX® 1L volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 22 Standard Taper glass stoppers. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class A volumetric flas…
Break-resistant Polypropylene (PP)
These heavy duty 1L PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after au…
These heavy duty 100 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately afte…
These heavy duty 2L PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately after au…
These heavy duty 250 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately afte…
These heavy duty 250 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include an autoclavable red polybutylene terephthalate (PBT) GL45 threaded cap with PTFE faced silicone liner and ETFE pouring ring for dry heat sterilization (180°C). New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots.Caution: DO NOT tighten caps immediately afte…
Approximate growth surface area is 55 cm²Ultra-Low Attachment dishes feature a covalently bound hydrogel layer that effectively inhibits cellular attachmentSurface minimizes protein absorption, enzyme activation, and cellular activationSurface is non-cytotoxic, biologically inert, and nondegradableSterilized by gamma radiation and nonpyrogenicActual inside growth surface diameter is 83.8mmHeight is 20mmManufactured from optica…
Break-resistant polyethylene terephthalate (PET) with transparency equivalent to glassMolded graduationsTamper-evident High-density Polyethylene (HDPE) capFilm-packed with or without tray in folded outer bag
Break-resistant polyethylene terephthalate (PET) with transparency equivalent to glassMolded graduationsTamper-evident High-density Polyethylene (HDPE) capFilm-packed with or without tray in folded outer bag
Break-resistant polyethylene terephthalate (PET) with transparency equivalent to glassMolded graduationsTamper-evident High-density Polyethylene (HDPE) capFilm-packed with or without tray in folded outer bag
(This is the suggested replacement for 6765, 6766, 6767).The Corning LSE Mini Microcentrifuge is a personal bench top instrument that operates at a fixed speed of 6,000 rpm (2,000 x g) and was designed for quick spin downs of micro-samples. Operation is made simpler and more convenient with the design of a quick-release rotor system and electronic brake. Once samples are loaded and the lid is closed, the rotor rapidly accelera…
(Discontinued: 6767; Suggested Replacement: 6770)Corning’s LSE Mini Microcentrifuge is a personal benchtop instrument designed for quick spin downs of micro-samples. Operation is simple and convenient; after loading sample tubes, close the lid and the rotor accelerates quickly to 6000 rpm (2000 x g). This speed range is ideal for bringing small droplets to the bottom of the tubes, for micro-filtrations, or basic separations. P…
Heavy duty bottle which can be used for storage as well as mixing and sampling. Includes linerless, one-piece autoclavable polypropylene plug seal cap with drip free pouring rings. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Glass bead indicates full capacity line on 100 mL through 2L size. Bottles have permanent white enamel graduations and marking spots. Color-coded poly…
These heavy duty 500 mL PYREX® round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL45 threaded cap with a drip-free pouring ring. New glass bead indicates full capacity line. Bottles have permanent white enamel graduations and marking spots. Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from…
These storage bottles can be connected to the Ascent Fixed Reactor system using the pre-assembled aseptic connector. They can be used for innoculation in an entirely closed solution.
These flasks can be connected to the Ascent Fixed Reactor system using the pre-assembled aseptic connector. They can be used to add media into the system or take out waste from the system in an entirely closed solution.
These flasks can be connected to the Ascent Fixed Reactor system using the pre-assembled aseptic connector. They can be used to add media into the system or take out waste from the system in an entirely closed solution.
These centrifuge tubes can be connected to the Ascent Fixed Reactor system using the pre-assembled aseptic connector. They can be used for innoculation in an entirely closed solution.