240FS AA
The Agilent 240FS AA is a Fast Sequential atomic absorption spectrometer that can double sample throughout and dramatically reduce running costs. Able to handle multi-element suites with ease, the Agilent 240FS AA system is ideal for environmental, food, and agriculture labs. The 240FS AA features automatic lamp selection, programmable gas box, and D2 background correction.
Pharmaceutical
Great experience to use this equipment.
Review Date: 15 Nov 2021 | Agilent Technologies
Analysis of metals in digested samples
It's software is easy to use and intuitive. It helps that the run is straightforward to set up and, during analysis, you will get prompts for the correct sample under the correct analyte. In addition, the results are easy to read and you don't have to play with the display as you do with other vendors' software.
Review Date: 24 Dec 2020 | Agilent Technologies
Ancient technique
Flame AA's are reliable, but it is an older method and older technique for metals analysis. In the environmental water lab, it is not the preferred instrument. It is slow and the lamps go out without warning. Matrix and environmental condition can also effect results.
Review Date: 9 Nov 2015 | Agilent Technologies
Metals quantitation
The 240 FS is a nice instrument, is really simple end effective. The engineering of the nebulizer and the combustion chamber is impressive and easy to adjust to customer needs. We are using it with the SIPS 20 a very effective dilution system. There are some minor issues with the software and the instrument is prone to signal drifting overtime.
Review Date: 8 Jun 2015 | Agilent Technologies
I used this product for all my PhD. It is easy to use and set up the instrument lamps and software. It could be used with any kind of sample from the simplest as water to the hardest as produced water (high salinity) and drugs. It is possible reach very low limit of detection for trace metal analysis.
Review Date: 8 Dec 2014 | Agilent Technologies
Trace elements in pharmaceutical softgels
This instrument works best when running individual samples and not sample after sample. In my opinion the autosampler is a pain to use, the preparation required to set the pump is not worth the time. The reproducibility of one run to another can vary by as much as 0.3%, which can lead to variance on each product you are running. The same lot can give different results tomorrow.
Review Date: 26 Apr 2012 | Agilent Technologies
The Agilent 240FS AA is a Fast Sequential atomic absorption spectrometer that can double sample throughout and dramatically reduce running costs. Able to handle multi-element suites with ease, the Agilent 240FS AA system is ideal for environmental, food, and agriculture labs. The 240FS AA features automatic lamp selection, programmable gas box, and D2 background correction.
Features:
- Reduce your analysis time by determining the concentration of all elements from a single aspiration
- Reduce sample consumption with less delay throughout analysis and less sample waste
- Get accurate results by determining 10 elements per sample in less than 2 minutes without sacrificing data quality
- Improve precision and accuracy with online internal standard corrections for physical differences, sample preparation errors, or drift
- Simplify your analysis by taking the guess work out of the method development with the SpectrAA comprehensive cookbook
- Tune your flame AA performance with the Mark 7 atomization system
- Mark 7 atomization system can achieve high sensitivity – typically greater than 0.9 Abs from 5 mg/L Cu