Select Mineral Oil Columns
Total petroleum hydrocarbon analysis is a routine technique in many environmental laboratories, with many samples needing to be screened. A simple and reliable method is required that provides the shortest analysis time.
Receive your quote directly from the manufacturer.
Total petroleum hydrocarbon analysis is a routine technique in many environmental laboratories, with many samples needing to be screened. A simple and reliable method is required that provides the shortest analysis time. Agilent J&W Select Mineral Oil meets this need, with a stabilized nonpolar bonded phase specifically for fast mineral oil analysis. The column is temperature stable up to 375/400 °C and provides speedy analyses according to DIN H53 and DIN-EN-ISO 9377-2 methods. Thanks to the temperature stability of Select Mineral Oil, C4-C40 hydrocarbons can be analyzed in less then ten minutes. The high temperature stability of the column permits faster bake-out. Note: For optimal injection performance use the special 4-m retention gap part number CP8015.
Features:
- Stabilized non-polar bonded phase engineered for fast mineral oil analysis
- Optimized selectivity for reliable Total Petroleum Hydrocarbon (TPH) results per DIN H53 N-ISO 9377-2 methods
- C4 to C40 hydrocarbons can be analyzed in less than ten minutes
- Low bleed
- Available in Fused Silica or UltiMetal
- Fast run time
- High temperature stability up to 375/400 °C
- Available in economical 3 and 6 packs
- Each Agilent J&W GC column is tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency to provide you utmost confidence in qualitative and quantitative results
- For details about the QC test conditions including the test probe mixture and the resulting chromatogram, please refer to the Agilent J&W GC Column Performance Summary shipped with each GC column
Similar Phases: Rtx-Mineral Oil
