Agilent J&W CP-SimDist UltiMetal performs extended analysis to C120, and is guaranteed to a Tmax of 450 °C, due to the virtually unbreakable inert UltiMetal tubing. The internal diameter of UltiMetal tubing is the same as for fused silica 0.53 mm id (Megabore) columns, providing trouble-free automation of on-column injection.
Agilent J&W CP-Wax 51 for Amines is designed for the analysis of C4-C10 amines, diamines and aromatic amines. The column conforms to EPA method 607.
Agilent J&W DB-Petro is a 100% dimethylpolysiloxane phase, precision-engineered for the analysis of PONA, PIANO and PNA from petroleum processes. These high resolution DB-Petro columns are bonded, cross-linked, and solvent rinsable, and have been extensively QC tested to the strictest industry standards.
PoraBOND Q is the long-term solution for analyzing volatile solvents and hydrocarbons. It is the most stable column of its kind and withstands repeated later injections. Due to our manufacturing techniques, the porous polymer is very pure and has virtually no catalytic activity.
Agilent J&W CP-Sil 5 CB is a high efficiency column containing a 100% dimethylpolysiloxane phase. Separation is almost entirely based on boiling points, making this column suitable for a wide range of applications with a broad temperature range.
Agilent J&W HP-88 is designed for the separation of fatty acid methyl esters (FAMEs). It provides greater cis/trans resolution than the DB-23, and has nearly identical selectivity as the CP-Sil 88, but with higher temperature limits.
Agilent J&W Ultra 1 is a 100% dimethylpolysiloxane, nonpolar column that resembles HP-1 but with tighter specifications for retention index and capacity factors. Agilent J&W Ultra 2 is a (5%-phenyl)-methylpolysiloxane, nonpolar column and resembles HP-5 but with tighter specifications for retention index and capacity factors.
Agilent J&W DB-35 columns are ideal for conformational analysis. The DB-35 is a (35%-phenyl)-methylpolysiloxane, mid-polarity column with low bleed.
Agilent J&W DB-Dioxin columns are specifically engineered for the analysis of polychlorinated dibenzodioxins (PCDD) and dibenzofurans (PCDF). The column resolves 2,3,7,8-TCDD and 2,3,7,8-TCDF from all other isomers in one run.
Total petroleum hydrocarbon analysis is a routine technique in many environmental laboratories, with many samples needing to be screened. A simple and reliable method is required that provides the shortest analysis time.
Agilent J&W DB-VRX features unique selectivity, engineered for optimum resolution of volatiles. The low-polarity DB-VRX columns deliver excellent peak shapes and are fully compliant with U.S. EPA methods 502.2, 524.2, and 8260.
Agilent J&W CP-Select CB for MTBE provides guaranteed analysis of MTBE in reformulated gasolines, with reproducible results. It has unique selectivity for ease-of-use with MTBE. The column's broad dynamic range for MTBE quantification delivers the highest productivity for increasingly demanding volatiles applications.
Comprehensive solutions for biodiesel, biogas, and fuel ethanol analysis that conform to ASTM and EN standards. Factory configuration and testing allows fast installation so you can start running your biofuel samples quickly.
Increase productivity in your GC and GC/MS lab with high throughput and automated sample preparation capabilities The high-end PAL3 autosampler offers three types of injection techniques: liquid injection, headspace, and solid phase microextraction (SPME).
Refinery gas analyzers are an integral part of any refinery lab and provide valuable information that allow refiners to monitor and optimize catalytic and other processes, establish market value of a gas when sold to the chemical industry, and enable the study of gaseous products from process under study or development.
Based on the Agilent 990 Micro GC, this portable four channel, multi-dimensional Refinery Gas Analyzer works in remote environments with complete operational simplicity. It is optimized for specific RGA analytes, with a total analysis cycle time of less than three minutes.
These factory-tested, ready-to-use GC analyzers measure impurities in ethylene and propylene samples using FPD, FID, PDHID, and MS detectors.
Agilent Reformulated Fuel Analyzers can be used for analysis of various oxygenates, benzene, and heavier aromatics. Multiple methods on a single instrument provide flexibility and cost-efficiency.
The Agilent Genomic Workbench software provides a powerful visualization tool for the analysis of key microarray applications.
The Agilent Custom CGH+SNP Microarray product line uses Agilent’s SurePrint technology to design and print user-defined CGH+SNP microarrays. Using Agilent’s eArray free application, users can design their own CGH+SNP microarrays to detect copy number changes and copy neutral aberrations, such as loss of heterozygosity (LOH) and uniparental disomy (UPD), on the same array.
The Agilent Custom CGH+SNP Microarray product line uses Agilent’s SurePrint technology to design and print user-defined CGH+SNP microarrays. Using Agilent’s eArray free application, users can design their own CGH+SNP microarrays to detect copy number changes and copy neutral aberrations, such as loss of heterozygosity (LOH) and uniparental disomy (UPD), on the same array.
Create your own custom microarray using SureDesign, Agilent's online design application, and focus on your specific research needs.
Create your own custom microarray using eArray, Agilent's online design application, and focus on the targets of interest for your specific research needs.
Agilent's Feature Extraction software automatically reads and processes up to 100 raw microarray image files. The software finds and places microarray grids, rejects outlier pixels, accurately determines feature intensities and ratios, flags outlier pixels, and calculates statistical confidences.
Agilent Gene Expression Hybridization Kits offer consistently more reliable and reproducible microarray results through robust fluorescently-labeled cRNA hybridization.
