Corning® Thermowell™ 96 well polycarbonate PCR microplates fit the most commonly used thermal cyclers For oil-free operation, plates must be used with sealing tape or a sealing mat and used in conjunction with thermal cyclers that have heated lids
These Costar® 0.65 mL microcentrifuge tubes are made of natural (uncolored) polypropylene and are RNase-/DNase-free. Supplied nonsterile and are autoclavable External graduations and frosted writing spot for easy sample identification Positive seal design allows for repeated opening and closing Flat cap surface for convenient labeling Withstands a maximum RCF of 17,000xg
(This is the suggested replacement for 355129) Made from optically clear polycarbonate Ideal for shaker culture applications Vent caps available for applications requiring sterile gas exchange Sterilized by gamma radiation and certified nonpyrogenic RNase- and DNase-free"
Corning® 50 mL clear polypropylene (PP) conical bottom centrifuge tubes come with the advanced polyethylene CentriStar™ caps and are bulk packed 25 per bulk bag. Foam racks can be purchased separately. The CentriStar™ cap has an easy-on/easy-off flat top and offers advanced ergonomics with its wider knurls and roll-over edge design for easier gripping. This leak-proof design comes with a revolutionary plug feature that virtual…
Reusable orange polycarbonate box holds 100 cryogenic vials in a 10 x 10 array Only for use with 1 - 2 mL internally threaded cryogenic vials Ridges on sides of box make them easier to grip while wearing gloves
(This is suggested replacement for 3720) Ultra thin, optically clear flat well bottom permits direct microscopic viewing, resulting in lower background fluorescence and enabling readings down to 340nm Opaque walls to prevent well-to-well crosstalk Can be used for both top and bottom reading instruments Flat bottoms with 360 µL total volume Recommended working volumes of 75 to 200 µL Sterilized by gamma radiation and cert…
Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. 500 mL receiver bottles feature easy grip sides for improved handling. Additional storage bottles can be purchased to increase capacity. Bottle caps are supplied sterile and individually packaged. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and nonpyr…
150cm² available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterile Nonpyrogenic
Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. 250 mL receiver bottles feature easy grip sides for improved handling. Additional storage bottles can be purchased to increase capacity. Bottle caps are supplied sterile and individually packaged. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and nonpyr…
These Corning® syringe filters have polypropylene copolymer housings, female Luer lock inlets and male Luer slip outlets. Nylon (NY) membranes are naturally hydrophilic, surfactant-free and offer the lowest extractables 100% integrity tested, sterile and certified nonpyrogenic and noncytotoxic Manufactured in accordance with ISO 9001 standards
(This is the suggested replacement for 430289) 2 mL capacity with round bottom Black graduations and larger marking spots for easier filling and sample identification Manufactured from polypropylene to withstand temperatures to -196°C Silicone washer for a secure seal Vials may be color coded with inserts (see Cat. No. 430499)n Sterilized by gamma radiation Certified nonpyrogenic and DNase/RNase-free
Banana-peel plastic wrap features easy opening for aseptic removal and eliminates static cling when wearing latex gloves. You can see the polystyrene pipet through the clear plastic wrap for instant size identification. Plus, space saving packaging reduces storage requirements, waste, and one material makes it easy to recycle.New anti-static clear all-plastic wrap allows full view of pipet for easy size identification and redu…
Designed to remove Stripwell™ strips from the egg crate holder
Fernbach design increases surface area for gas exchange Made from optically-clear polycarbonate Ideal for shaker culture applications Baffled bottoms improve mixing and increase gas exchange Vent caps supplied in every case of product for applications requiring sterile gas exchange Sterilized by gamma radiation and nonpyrogenic RNase- and DNase-free
These Corning® spatulas are specifically targeted toward researchers interested in eliminating the recycling and cleaning necessary with reusable spatulas. Spatulas have a flat end blade at one end and a spoon at the other end. Each spatula is individually packaged, RNase/DNase free, nonpyrogenic, antistatic and sterile.
Cellulose acetate (CA) membranes provide fast flow rates and low protein binding and are good for filtering cell culture media. 250 mL receiver bottles feature easy grip sides for improved handling. Additional storage bottles can be purchased to increase capacity. Bottle caps are supplied sterile and individually packaged. Angled hose connector simplifies vacuum line attachment. Individually packaged, sterile and nonpyr…
Corning® 15 mL clear polypropylene (PP) centrifuge tubes have traditional polyethylene plug seal caps and are bulk packed 50 per bag. Foam racks can be purchased separately. Please check our Technical Information Listing for information on the physical and chemical properties of Corning plastic centrifuge tubes as well as important suggestions for safe use.Black printed graduations and a large white marking spotMaximum RCF is…
Has 25,440cm² cell growth area Two 26mm diameter filling ports allow direct access to chamber bottom providing greater flexibility for sterile filling and emptying by pouring, pipetting or via tubing in a fully closed system Standard 33mm threaded caps have 0.2 µm pore nonwettable membranes sealed directly to the caps to allow gas exchange Optional 33mm threaded caps are available with integrally sealed chemically resistant, h…
(This is the suggested replacement for 431112) Approximate growth surface area is 500 cm² Actual internal growth surface dimensions is 224 x 224mm Height is 25mm Manufactured from optically-clear virgin polystyrene Treated for optimal cell attachment Sterile and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange Design allows for easier handling Customer Revie…
Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interactions Is suitable primarily for the immobilization of large molecules, such as antibodies, that have large hydrophobic regions that can interact with the surface Binding capacity of approximately 250 ng of mouse IgG/cm2 EIA/RIA plates are tested on lot-to-lot basis and the certification results for ea…
Corning® Special Optics 96-well Microplates have black walls with ultra thin, clear bottoms for sharp, clear images and minimal background in fluorescent assays Designed to reduce well-to-well crosstalk during fluorescent assays Can be used for both top and bottom reading instrument Not treated (or medium binding) polystyrene surface is hydrophobic in nature and binds biomolecules through passive interactions Is suitable…
Flat bottoms with 360 µL total volume Recommended working volumes of 75 to 200 µL Treated for optimal cell attachment Nonreversible low evaporation lids with condensation rings to reduce contamination Sterilized by gamma radiation and nonpyrogenic Individual alphanumeric codes for well identification Individually wrapped
Approximate growth surface area is 55cm² Actual inside growth surface diameter is 80.5mm Height is 20mm Manufactured from optically-clear virgin polystyrene Treated for optimal cell attachment Sterile and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange
Approximate growth surface area is 9cm² Actual inside growth surface diameter is 34.4mm Height is 10mm Manufactured from optically-clear virgin polystyrene Treated for optimal cell attachment Sterile and nonpyrogenic Have stacking beads to aid in handling Supplied with vents to provide consistent gas exchange
Increase productivity by enabling to grow more cells faster and easier. 3- or 5-layer formats provide 525 cm2 and 875 cm2 cell growth surface area, respectively.Even distribution of media across all layers for homogeneous cell growthAbility to mix cells and reagents in the Falcon Multi-Flask saves time and reduces risk of contaminationFlexible design allows to pour or aspirate/recover cells using a pipetConsistent surface trea…
