Trusted information for laboratory scientists on Anti-Doping Science lab products and techniques on SelectScience, including Hematology, Biochemistry, HPLC and UHPLC, GC / MS.
The EXP Ti-lok Fitting features a two-stage locking mechanism ideal for PEEK-clad or sleeved fused silica, such as PEEKsil™ tubing. The two-stage fitting features a patented auto-adjusting titanium hybrid ferrule that seats in any port. The titanium collet locking mechanism provides a second grip point to even the pressure load over the tubing and not crush the silica. The incorporated rear collet locking mechanism is not remo…
Alfred 60 is the first fully automated system able to perform bacterial culture, RAA and susceptibility testing by automating the whole process of sample inoculation, reading and result transmission.Using the patented technology based on light scattering this instrument is able to detect the presence of bacteria and their drug resistance in a few hours with high sensitivity and specificity. Alfred 60 monitors the growth phases…
Prima BT Bench top Mass Spectrometer - Highly reliable, precise, and flexible gas analyzer specifically designed for process development laboratories. The Thermo Scientific Prima BT Bench top Mass Spectrometer is an industrial laboratory gas analyzer based on scanning magnetic-sector mass spectrometry. Designed for continuous operation in a process environment, the Prima BT mass spectrometer is simple to operate and easy to m…
Consolidates a comprehensive cardiac marker panel with the new generation of STAT analytes including D-Dimer, hCG, Myeloperoxidase and Procalcitonin Value assignment is provided for key instrument systems including Abbott Architect, Beckman Coulter Access, AU and UniCel systems, Ortho Clinical Diagnostics VITROS, Roche Cobas and Elecsys systems and Siemens Advia, Dimension, Dimension Vista, Immulite and Stratus systems. Desc…
LyoSpeed™ delivers exceptional results with even the most difficult samples. When working with certain solvents, e.g. HPLC solvents, a fully dried result can be hard to achieve due to interactions with the dissolved sample - resulting in the formation of a gum or oil.In response to customer demand Genevac have developed a Fast Lyophilisation, or LyoSpeed™ process to resolve these problems for customers working with HPLC solve…
Fast separation of pharma samples: 10 compounds in 2 minutes. As in all industries, greater productivity has become increasingly important in the field of pharmaceuticals. Consequently, there is a growing demand for fast and ultra-fast separations as well as higher sample throughput. To answer these requirements, Merck Millipore offers the perfect combination for separation speed and peak symmetry: Purospher® STAR UHPL…
World's First Product Containing a Metabolite MRM Database to Support Triple Quadrupole Gas Chromatograph Mass Spectrometers. Metabolite analysis uses exhaustive measurements of the metabolites in living organisms to comprehensively investigate the phenomena of life based on changes in metabolite components. This product was developed to support more accurate and efficient metabolomic analysis by GC/MS and GC/MS/MS. GC/MS Me…
Polymer bulk packing material for anion exchange applications.
Chromabolt™ is a family of pre-validated columns prepacked with EMD Millipore chromatography resins, designed for early clinical stage manufacturing. Available in 3 sizes – 10, 20 and 32 cm inner diameter (i.d.), these prepacked columns free up end users valuable time and resources by eliminating manual packing and cleaning. With Chromabolt™ prepacked columns, you can spend your time on manufacturing your products and not on…
Eshmuno® A is a rigid, high capacity Protein A affinity chromatography resin for the purification of Fc-containing proteins, including but not limited to monoclonal antibodies. Eshmuno® A resin can be cleaned and sanitized under acid and alkaline conditions while maintaining high dynamic binding capacity at high flow rates.The Eshmuno® A resin contains a EMD Millipore proprietary ligand. This ligand is recombinantely expresse…
The PDS-100 is a Programmable Dispensing System which uses precision stepper motors to control FMI “Q” and “RH” pump models including STQP, STQ, STH, & STRH in all piston sizes. The FMI pumps are integrally mounted to the programmable controller. The controller contains the stepper motors and driver electronics, and is a rugged anodized aluminum design. Several single and dual pump configurations are available including a dua…
The DX Tracked Specimen Delivery Service CATEGORY B BIOLOGICAL SUBSTANCES Using our Tracked Specimen service, you can send your Category B biological substances through our dedicated pre 9 am delivery network and enjoy the benefits of safe and compliant packaging, bar-code tracking and confirmation that your items are out for delivery. CATEGORY A SPECIMENS – FOR CATEGORY A INFECTIOUS SAMPLES DX does not carry Category A spe…
PiP Pumps micro π-petter - Pipetting, Syringing and Diluting Ideal for repetitive and volumetric dispensing of acids, solvents and aqueous solutions. Model "PiP" Precision Dilutor Features: FMI's unique low dead-volume pump heads, and synchronous motor drives. Can act as a single shot dispenser using the hand/foot switch or as a single metering pump in the continuous mode. Using a combination of forwar…
Ideal for Analyzers, Environmental Sampling & Injection, & Low Current Remote Battery Operation Model QBG Low Current DC Features: Ideal for extended 12/24 volt battery operation in remote locations. They are rated 60 RPM at 12 VDC and 120 RPM at 24 VDC. One Moving Part - NO VALVES! Low Current DC Operation Self Priming Patented CeramPump® Design
Seralite® is a rapid diagnostic device for the quantitative measurement of kappa (K) and lambda (λ) immunoglobulin free light chains (FLCs) in serum. The assay utilises highly specific, anti-K and anti-λ monoclonal antibodies which are conjugated to gold particles and incorporated into a simple to use lateral flow device. Utilising a portable reader the results are presented on screen in mg/L along with the calculated K/λ rati…
Overview Highly compact and lightweight Micro-sampling on whole blood: CBC: 10μL / CBC+CRP: 18μL Precise cellular identification through electronic impedance variation method Haemoglobin measurement with photometry CRP measurement with immunoturbidimetry technology Features CRP Ready and easy to use CRP reagent No need to take the CRP reagent out after use Integrated thermal printer (full data printout, including PLT, RBC an…
Over 16 years of knowledge and experience of wireless monitoring has been invested into IceSpy temperature monitoring systems. IceSpy transmitters have built in monitoring for temperature, humidity and door events. Our cloud-based solutions also enable you to integrate real time temperature monitoring in vehicles with GPS tracking. IceSpy is found throughout the food, pharmaceutical and hospital sectors to monitor storage faci…
The cobas p post-analytical unit is an automated storage device for sample archiving after the analytical phase. Major benefits of the solution are: • Shorter Turnaround Time (TAT). • Reduction/elimination of manual handling for archiving, retrieval, and wasting. • Reduction/elimination of biohazard exposure. • Continuous quality monitoring of the storage area and complete traceability of all processes (storage, retrieval, and…
Task targeted automation systems that mechanize one or several pre-analytical steps like e. g. - pre-sorting, - centrifugation, - decapping, - aliquoting, - bar coding and sorting / archiving. The systems increase the quality and efficiency in pre-analytics and reduce the operator's exposure to potentially hazardous biological material.
The centerpiece of the Labotix product line is the Rapid Response Universal Specimen Handling (RRUSH®) system. RRUSH is an open automation solution that contains all of the components necessary to automate today’s clinical lab. The system’s purpose is to transport and sort specimen containers and deliver them to appropriate analysis or storage areas, ready for processing. The Labotix system is a configuration of automated modu…
Solid Phase Extraction (SPE) is the basis of analytical laboratories. A crucial step of this process is sample preparation. Therefore we know that a clean sample will yield better results. To achieve this goal SiliCycle has designed SiliaPrep, which is a silica based sorbent exempt of fines, and SiliaPrepX, polymeric based sorbent, that can be found in cartridges, well plates and SPME (Solid Phase Micro-Extraction) cartridges…
With a choice of over 40 different phases (and we continue to develop additional, unique and powerful HPLC sorbents) our SiliaChrom series of HPLC columns surely has the reversed or normal phase you need for your application.Mostly made from a silica-based sorbent, we carefully monitor the manufacturing process, from raw material synthesis to packing, ensuring you that our HPLC columns are of the highest quality.All columns ar…
For two decades, SiliCycle has been dedicated to silica gel manufacturing and has achieved a strong know-how and recognized expertise in this field. Furthermore, to support the increasing demand of our spherical silica gels, we have developed and optimized a highly controlled, large-scale, production process for all our SiliaSphere products, without compromising silica quality. SiliaSphere silica gels are manufactured from a…
There is a growing need for applications in food and environmental areas able to cope with the analysis of a large number of analytes in very complex matrices. New analytical procedures demand sensitivity, robustness, effectiveness and high resolution with reduced analysis time. To improve the efficiency of traditional methods, a new sample preparation approach was developed. It’s called QuEChERS and it says it all: an acrony…
