Cannabis testing is a process that evaluates the safety, potency, and quality of cannabis products for medical and recreational use. Through rigorous analysis, cannabis testing laboratories assess factors such as cannabinoid content, terpene profiles, and levels of contaminants like pesticides and heavy metals. By ensuring compliance with regulatory standards and consumer safety, cannabis testing plays a crucial role in promoting transparency and confidence in the burgeoning cannabis industry. Explore how cannabis testing laboratories contribute to delivering reliable and high-quality cannabis products to consumers worldwide.
Pulsed discharge detector Model D-3 is designed for plug-and-play installation on Agilent GC's, with models available for the 6890 and 7890. The D-3 is optimized for trace level work in the helium photoionization mode, and utilizes the electronics and power supply of the host GC. Model D-5 is optimized for electron capture detection. Available for 110 VAC and 230 VAC.
Model D-5 is a pulse discharge GC detector designed for plug-and-play installation on the Agilent 6890. The D-5 is optimized for trace level work in the electron capture mode, and utilizes the electronics and power supply of the host 6890. Model D-3 is optimized for helium photoionization detection. Available for 110 VAC and 230 VAC.
Model D-4 a GC Detector available in versions for easy installation on most of the GC's in current use, including the Varian 3800, Shimadzu 14 and 17, ThermoFinnigan Trace, Mega, and Top, and Hewlett Packard 5890. The D-4 is single mode, optimized for trace level work in the helium photoionization mode. Available for 110 VAC and 230 VAC.
Model D-6 is a single mode GC detector, optimized for trace level work in the electron capture mode. IT is available in versions for easy installation on most of the GC's in current use, including the Varian 3800, Shimadzu 17, ThermoFinnigan Trace, Mega, and Top, and Hewlett Packard 5890. Available for 110 VAC and 230 VAC.
Reduced breakdown liners Our improved injection port liner reduces breakdown of endrin and DDT during injections while increasing the interval between liner changes. The problem DDT and Endrin are easily degraded in the injection port; with non-deactivated liners and those filled with non-deactivated glass wool, Endrin breakdown can be as high as 98%. EPA method 8081A states "If degradation of either DDT or Endrin exceeds 15%,…
VICI AG uses proprietary liquid phase processing to produce low bleed characteristics while maintaining identical retention characteristics to the phases you are used to. These processes combined with proprietary coating, curing, bonding, and crosslinking produce MS-certified bleed characteristics equal to the best. Improved upper temperature limits enhance column "bake out", reducing sample carryover and cycle times. ValcoBon…
Now you can reduce run time, faster than micropacked, by replacing your packed columns with ValcoPLOT HayeSep capillary PLOT columns, with phases available only from VICI. Our proprietary phase processing produces the first capillary PLOT columns with characteristics identical to HayeSep packed columns. The ValcoPLOT line also includes Molesieve and Alumina PLOT columns. Visit VICI AG website to veiw now.
Permeation tubes are small, inert capsules containing a pure chemical compound in a two phase equilibrium between its gas phase and its liquid or solid phase. They are used to generate a stable concentration of a specific trace chemical. At a constant temperature, the device emits the compound through its permeable portion at a constant rate. They are typically inserted into a carrier flow to generate test atmospheres for c…
VICI Metronics Dynacalibrators introduces the stand-alone portable calibrator. VICI Metronics Dynacalibrators allow you to verify the accuracy of analytical data from air pollution monitoring, industrial hygiene surveys, odor surveys, and other instruments measuring gas concentration. All models enable calibrations traceable to NIST standards for almost any gas analyzer, in the lab or in the field. Completely portable • Pump p…
Patented G-Cal permeation tubes offer a proven and repeatable means of generating a desired gas or vapor concentrations. The permeant gas escapes through the proprietary membrane system and mixes with a carrier gas (nitrogen is the most common) at a controlled flow rate to obtain a known mixture in ppm or ppb. Applications include calibration of gas monitoring systems and chromatographs, accuracy check of gas detectors, and ge…
Ultra-high capacity for the contaminant of interest; either Moisture, Hydrocarbons, Oxygen, Sulfur and Mercury. For applications with a single contaminant of interest, high capacity contaminant specific traps are your best option, since they generally have four times as much capacity for the specific contaminant as a purifier. This translates to a capacity that exceeds twelve standard type "A" tanks of gas or the equivalent of…
VICI AG heated helium purifier provides point-of-use purification of helium or other noble gases, such as Ar, Ne, Kr, and Xe, to sub-ppm levels of reactive gaseous impurities, removing even nitrogen and methane. The nitrogen purifier is similar, purifying nitrogen to sub-ppm levels of gaseous impurities. The miniature version of each purifier is designed to be installed in a GC’s flow path immediately upstream of the injector.…
Gas purifiers for specific gases designed to go in-line with the carrier or detector gas supply, these gas purifier modules dramatically reduce contaminant PPM levels in helium, hydrogen, nitrogen, or air. They decrease baseline noise and increase GC/MS sensitivity and replace three traps with one gas purifier.This line includes original equipment gas purifiers for the Agilent Mass Spec and LC Mass Spec. Additional specialized…
Syringes used to fill a loop on a sample injection valve have blunt, smooth ends. The end of the needle must contact the bottom of the valve’s fitting detail uniformly and seal on the outside of the tip to deliver sample with any repeatability. All VICI Precision Sampling syringes for valve injections have smooth, burr-free ends that fit the valve fitting details perfectly. The standard HPLC syringe is our basic C-160 with a 2…
Syringes used to fill a loop on a sample injection valve have blunt, smooth ends. The end of the needle must contact the bottom of the valve’s fitting detail uniformly and seal on the outside of the tip to deliver sample with any repeatability. All VICI Precision Sampling syringes for valve injections have smooth, burr-free ends that fit the valve fitting details perfectly. The standard HPLC syringe is our basic C-160 with a 2…
Hollow, flow-through plunger with integrated 3-way valve designed for liquid and gases, with a push button on/off valve at the front end. The new Precision Sampling hollow plunger syringe with two integrated valves opens a whole new world of application possibilities: Dispense a viscous sample more easily by introducing it into the rear of the syringe instead of drawing it up through the needle. Eliminate sample-to-sample cros…
The Dual Layer PEEK tubing eliminates any concern that a critical sample stream could be contaminated by pigments used to color code the tubing. The pigmented layer surrounds a separate but integrally-bonded inner layer of natural PEEK. The 1/16" OD tubing is available in standard sizes, or in OEM quantities with any ID you specify, from .002" to .030". The ID tolerance of ±.001" is equivalent to or better than that of tubing…
The Baroxymeter is a portable respirometer designed for Direct Toxicity Assessment (DTA) of waste water. DTA takes a risk-based approach to water quality analysis, using effects in biological systems as a basis for assessing likely harm to an ecosystem in water receiving effluent discharges. With DTA, an integrated assessment is made of the impact of complex mixtures of pollutants, which can usually only be partially character…
SimGlycan™ Software (a product of PREMIER Biosoft International) predicts the structure of a glycan from the MS/MS data acquired by AB SCIEX mass spectrometers. It facilitates the study of glycosylation and post translational modifications. The software works directly with *.t2d and *.wiff data generated from AB SCIEX instruments, including the 4800 Plus MALDI TOF/TOF™ Analyzer, 4000 QTRAP® System, and QSTAR® Elite System. * M…
The Advantages at a Glance Ready to use columns No more laborious cleaning of Glass Columns Easy handling Reduced Costs- the more samples the more cost effective Certified Columns Excellent Performance The determination of the hydrocarbon oil index in surface, industrial and process water in compliance with EN ISO 9377-2 (H53) is daily routine in many laboratories. Using intelligent sample preparation, time and costs for the a…
"Extend-C18 columns incorporate a unique patented bidentate silane, combined with a double-endcapping process that protects the silica from dissolution at high pH - up to pH 11.5. Columns are best applied for separations of compounds that are either (1) basic and have little or no retention at low or intermediate pHs, (2) more stable or more soluble at high pH, or (3) basic and show poor peak shape at low or intermediate pH.…
Thermal desorption (TD) combines sample preparation, extraction, and injection into a single automated process for the analysis of volatile and semi-volatile organic compounds (VOC and SVOC).
Designed for Rapid Resolution and Ultra Performance LC Systems • Communicates with ChemStation via an exclusive SofTA Driver. • Superior HPLC Detection to Replace or Complement your Current Detection. • Sensitive Detection for a Wide Variety of Chemical Classes and Structures. • Easy to Use, Fast Start-up, No Consumable Parts, Low Cost of Operation. • Precise Vapor Phase Control with SofTA Exclusive Thermo-Split™ Technology. •…
Biochrom instruments are supplied complete with the analytical column of your choice.Manufactured from PEEK material, the columns are free from corrosion and metal contamination and are packed with optimally sized, cation-exchange resin. The columns are attached with finger-tight fittings so no special spanners are required to ensure a leak-free seal. Additional analytical and prewash columns can be purchased. The Biochrom…
Simple portable colorimeter ideal for use in the field or tropical conditions. An easy to use portable colorimeter designed for use by doctors and medical technologists in small and medium sized clinics in hot humid and remote locations. The unit has been tropicalized to protect it in hot and humid conditions (to 45°C and 70%, respectively); the 10 gelatin filters are encased in glass to prevent fungal growths appearing and…
