Cannabis Testing Products & Reviews

Optimize Replacement Pistons/Plungers are, by design, a consumable part of the HPLC pump and should be replaced on a regular preventative maintenance schedule. To maintain peak performance and avoid unplanned downtime, sapphire pistons require inspection every six months with yearly or as-needed replacement. Optimize sapphire pistons offer optimal concentricity and resistance to wear. Each sapphire rod is specifically cut in r…

The OPTI-LYNX™ Quick Connect Filters allow you to connect any 10-32 valve/port for trapping or analytical column for pre-column filtration. With OPTI-LYNX™, accessing and changing the insert takes only a quarter turn. Replace traps, filters or change configurations in seconds, without tools. OPTI-LYNX™ traps and filters (ordered separately) come in several bed volume/ diameter/ porosity combinations, allowing you to find your…

The OPTI-LYNX™ Quick Connect Trap Columns allow you to quick-connect to any 10-32 valve/port for trapping or analytical column for pre-column filtration. With OPTI-LYNX™, accessing and changing the insert takes only a quarter turn. Replace traps, filters or change configurations in seconds, without tools. OPTI-LYNX™ traps and filters (ordered separately) come in several bed volume/ diameter/ porosity combinations, allowing you…

The OPTI-LYNX™ QuickConnect Guard Column is a high-performance, cartridge-based guard system, suitable for use with any 10-32 analytical column due to its auto-adjusting ZDV port adapter. OPTI-LYNX™ combines effective column protection with the convenience of quick-connect operation. Some cartridge-based guard column products offer convenience with a price: higher internal volumes. Optimize Technologies, refuse to compromise p…

The EXP Ti-lok Fitting features a two-stage locking mechanism ideal for PEEK-clad or sleeved fused silica, such as PEEKsil™ tubing. The two-stage fitting features a patented auto-adjusting titanium hybrid ferrule that seats in any port. The titanium collet locking mechanism provides a second grip point to even the pressure load over the tubing and not crush the silica. The incorporated rear collet locking mechanism is not remo…

Target Sufficiency® is the ability of a target system to respond to a therapeutic. It reflects the abundance and forms of the drug target protein, as well as other key system proteins that connect the target to disease phenotypes and enable response. Assessment of the target system requires an analysis platform that can simultaneously capture multiple precise protein measurements.

The ecTOF is the world’s first GC-HRMS with simultaneous acquisition of EI (Electron Ionization) and CI (Chemical Ionization) information in a single injection. While using EI as the gold-standard GC/MS ionization, the ecTOF in parallel operates a novel CI source. This way it simultaneously provides perfectly aligned accurate mass structural and molecular ion information within a single GC run.

The ReadyToProcess WAVE 25 rocker features integrated temperature sensors and load cells, designed for convenient handling and control of cell cultures up to 25 L. A filter heater is delivered with the system.  

Validated high performance prepacked columns for scale-up and GMP biomanufacturing

A compact benchtop design that incorporates 2 or 10 individually powered, high-output stirring stations which can prepare samples for content uniformity testing up to 90% faster than conventional methods.​

From small-scale R&D to large-scale manufacturing, Pion homogenizers deliver exceptional fluid processing for particle size reduction (micronization,) cell disruption, and the creation of stable micro- and nanoemulsions and dispersions. Built for scalability, we make the transition from lab to commercial production seamless. Trusted by pharmaceutical, biotech, cannabis, chemical, and food and beverage manufacturers worldwide.

Previously known as SolventTrapSVOC Solvent Recovery System

Automated sample preparation workstation for high volume samples  

SPE Disks for Water Extraction

One single kit to quickly and reliably determine 18 different and clinically relevant steroids with only one extraction process.

The QuEChERS Clean-up step is rapidly completed using the QuICK QuEChERS cartridge. This self-contained cartridge contains 110 mg of anhydrous MgSO4 and 180 mg of PSA. Placed on the end of a disposable syringe, the QuEChERS extract is pushed through directly into a sample vial for analysis. Clean-up is equivalent to dSPE clean-up, but faster and easier, eliminating the need for centrifugation.

Pre-packed 6 ml anion exchange SPE cartridges are made to the exact specification of EPA Method 548 to assure high capture efficiency and consistent results for excellent analytical reproducibility.

Airborne laboratory contamination may interfere with solid-phase extraction results. This problem is easily prevented by using the Zero-Blank filter. Using an adaptor (included), this cartridge is fitted on top of the SPE cartridge during the drying step and captures potential contamination making results more accurate.

Clean, activated, and ready-for-use, 30 mesh copper granules remove unwanted elemental sulfur from pesticide and PCB extracts. Granules are much easier to use than copper powder or TBA and eliminate the need for toxic mercury.

Chlorophyll in QuEChERS extracts must be removed to reduce potential instrument downtime. This is removed from extracts using graphitized carbon black (GCB) Unfortunately, GCB also removes planar analytes reducing analytical accuracy. ChloroFiltr®, used in place of GCB in dSPE tubes, removes unwanted chlorophyll without removing pesticides or environmental analytes. No change in procedure are required.

When clean plastic cartridges are not clean enough. 6 mL glass SPE cartridges can be packed with your choice of UCT sorbent using PTFE frits and individually sealed in certified Mylar for purity.

Enviro-Clean 500mg/6mL cartridge PSDVB w/Polyethylene frits. It is used with EPA Methods 526, 527, 528, 529 and 8330.

Select pH Buffer Pouches - UCT has developed a line of premeasured “ready-to-use” phosphate and acetate buffer pouches. These pouches contain the correct quantity of reagent to quickly and accurately prepare buffers at the correct pH and concentration to simplify solid-phase extraction methods.

Styre Screen® Extraction Columns contain an ultra clean, highly cross-linked styrene and divinylbenzene copolymer. The Styre Screen particles have an average particle size of 30 microns and a very high analyte capacity making them ideal for standard solid phase extraction applications. The increased analyte capacity means that less sorbent bed mass is needed which results in faster flow rates and less solvent use. Higher th…