Environmental Products & Reviews

The OPTI-GUARD® 3 mm Columns maintains the tool-free connectivity of the OPTI-GUARD 1 mm, but incorporates a cartridge based format to allow for a larger bed with more capacity. The two-part holder is designed for use with any analytical column to provide vital protection from dirty samples and strongly retained contaminants. An auto-adjusting stem conforms to any tube stop depth for a perfect zero-dead-volume connections.Key…

OPTI-SEAL® Piston/Plunger Seals are the longest lasting seals on the market. Machined from either of two proprietary polymer blends, UHMW-PE or ITB, Optimize Seals provide the ultimate in high pressure sealing capacity. For mostly aqueous buffered mobile phases, OPTI-SEAL® UHMW-polyethylene is the wisest choice. Specially designed to be more resistant to abrasion and wear than standard polyethylene seals, they can last up to s…

Optimize realizes that your time is valuable and should not be wasted worrying about fittings. For this reason, all Opti-Lock Fittings are precision machined in the USA for optimal quality and thread consistency. The machining process is the best way to ensure tight manufacturing tolerances and minimal product variance. What does all this mean? It means that every fitting you purchase from Optimize will perform just as well as…

Optimize Back Pressure Regulators utilize an active mechanism to maintain steady back pressure across a range of mobile phase viscosities and flow rates. Placing one downstream from your detector will prevent solvent decompression and bubble formation in the flow cell, reducing baseline noise and drift. Each pre-set Optimize stainless steel Back Pressure Regulator offers a 100µL internal volume and includes fittings for immedi…

Optimize Replacement Pistons/Plungers are, by design, a consumable part of the HPLC pump and should be replaced on a regular preventative maintenance schedule. To maintain peak performance and avoid unplanned downtime, sapphire pistons require inspection every six months with yearly or as-needed replacement. Optimize sapphire pistons offer optimal concentricity and resistance to wear. Each sapphire rod is specifically cut in r…

The OPTI-LYNX™ Quick Connect Filters allow you to connect any 10-32 valve/port for trapping or analytical column for pre-column filtration. With OPTI-LYNX™, accessing and changing the insert takes only a quarter turn. Replace traps, filters or change configurations in seconds, without tools. OPTI-LYNX™ traps and filters (ordered separately) come in several bed volume/ diameter/ porosity combinations, allowing you to find your…

The OPTI-LYNX™ Quick Connect Trap Columns allow you to quick-connect to any 10-32 valve/port for trapping or analytical column for pre-column filtration. With OPTI-LYNX™, accessing and changing the insert takes only a quarter turn. Replace traps, filters or change configurations in seconds, without tools. OPTI-LYNX™ traps and filters (ordered separately) come in several bed volume/ diameter/ porosity combinations, allowing you…

The OPTI-LYNX™ QuickConnect Guard Column is a high-performance, cartridge-based guard system, suitable for use with any 10-32 analytical column due to its auto-adjusting ZDV port adapter. OPTI-LYNX™ combines effective column protection with the convenience of quick-connect operation. Some cartridge-based guard column products offer convenience with a price: higher internal volumes. Optimize Technologies, refuse to compromise p…

The EXP Ti-lok Fitting features a two-stage locking mechanism ideal for PEEK-clad or sleeved fused silica, such as PEEKsil™ tubing. The two-stage fitting features a patented auto-adjusting titanium hybrid ferrule that seats in any port. The titanium collet locking mechanism provides a second grip point to even the pressure load over the tubing and not crush the silica. The incorporated rear collet locking mechanism is not remo…

The ecTOF is the world’s first GC-HRMS with simultaneous acquisition of EI (Electron Ionization) and CI (Chemical Ionization) information in a single injection. While using EI as the gold-standard GC/MS ionization, the ecTOF in parallel operates a novel CI source. This way it simultaneously provides perfectly aligned accurate mass structural and molecular ion information within a single GC run.

The timsMetabo™ is uniquely designed to deliver unprecedented sensitivity, separation power and annotation confidence for small molecules. Bruker’s technology and workflow innovations combine depth and selectivity for the ultimate in profiling and targeted applications.

The ReadyToProcess WAVE 25 rocker features integrated temperature sensors and load cells, designed for convenient handling and control of cell cultures up to 25 L. A filter heater is delivered with the system.  

Fully automated sample preparation system for PFAS and environmental workflows

PhyTip® Gel Filtration columns are unique tools for high throughput micro volume desalting or buffer exchange applications. They represent the only high throughput, automatable, chromatography desalting solution. Unlike standard dialysis, up to 96 samples can be processed at a time in as little time as ~ 30 minutes and in most cases re-concentration is not required at the end. The gel filtration columns are similar to the P…

Never use Sodium Sulfate Again!

Previously known as SolventTrapSVOC Solvent Recovery System

SPE Disks for Water Extraction

One single kit to quickly and reliably determine 18 different and clinically relevant steroids with only one extraction process.

The ideal device to accurately set and maintain temperatures.

Heating and mixing in any plate.

Complete Vacuum Manifold System includes a glass block, Corian® manifold lid, a cover gasket, a vacuum gauge and valve assembly, teflon tips (16 or 24), an adjustable collection rack, bulkhead luer fittings, plugs (16 or 24), and manifold safety tray.

Stainless Steel Manifold -available in single, 3 and 6 station designs. The 3 and 6 multi-station manifolds allow the simultaneous processing of multiple samples.

HydraFlow ® is the latest addition to the UCT’s family of SPE manifolds geared towards efficient sample processing.  Its unique design provides enhanced precision and streamlined sample extractions for large volume water analysis.

Cleaning various items used in ultra-trace analysis work is a critically important laboratory routine. traceCLEAN assures best cleaning quality of your TFM, glass and quartz parts for ICP/ICP-MS accessories. Any trace metal contaminants stay within the reservoir and do not come in contact with the cleaned trace accessories. The cleaning process with the traceCLEAN takes about an hour, enhancing the overall lab workflow. 

ETHOS™ X microwave extraction line allows quick heating of the cannabis material for terpene isolation. Solvent-free extraction process takes only a few minutes and prevents any thermal degradation often noticed during use of conventional extraction methods. The fresh and characteristic taste of strain-specific cannabis is maintained, and high-quality terpenes are assured. The ETHOS X 2.0 is our latest generation of benchtop…