Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
The 1260 Infinity II Isocratic Pump provides isocratic solvent management for HPLC, UHPLC, and GPC/SEC applications. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min.
The 1260 Infinity II SFC Binary Pump is a supercritical fluid chromatography (SFC) pump that supports high-pressure gradient formation and precise mobile phase delivery up to 5 mL/min and 600 bar. It can be used with a broad range of chiral and achiral columns, and ideal for fast, high-throughput SFC and SFC/MS applications. The 1260 Infinity II SFC Binary Pump is equipped with special pistons and seals for utmost robustnes…
The 1290 Infinity II Vialsampler combines sample management and column handling in a single autosampler module. The Vialsampler injects from up to 132 standard 2 mL vials and has a pressure rating of 1300 bar.
The 1260 Infinity II Manual Preparative Injector is ideal for routine purification of milligram and multigram quantities at flows up to 200 mL/min and pressures up to 600 bar. Modular sample loops in various sizes up to 20 mL volume allow application in many different purification workflows.
The 1260 Infinity II Analytical-Scale Fraction Collector is optimized for laboratories performing analytical-scale compound purification of nanogram to milligram quantities with typical flow rates between 0.1 and 10 mL/min. The module features the full set of collection modes and is compatible with a wide variety of trigger sources. SBS plates and four different tube sizes with various lenghts are supported.
The 1260 Infinity II Bio-Inert Fraction Collector is the ideal extension to your system when you need to further investigate separated compounds. A wide range of collection vessels, including vials, microplates, or custom vessels, provide highest collection flexibility. Handling flow rates up to 10 mL/min, even separations using columns with larger inside diameters for small-scale preparative applications are possible.
The 1260 Infinity II Preparative Valve-Based Fraction Collector is a compact, full-featured fraction collector for daily compound isolation and purification by LC. Optimized for collection of up to 11 high-volume fractions its versatile design allows operation in both routine sample purification workflows and recovery applications. The built-in fraction delay sensor allows precise and automatic calibration of the fraction coll…
The 1290 Infinity II Preparative Open-Bed Fraction Collector is our most versatile fraction collector, enabling high-capacity fraction collection of purified compounds for semipreparative and preparative-scale LC purification. This module is ideally suited to open-access environments, provides all standard trigger modes for purification workflows, and is optimized for flow rates up to 200 mL/min.
The 1260 Infinity II Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C.
The 1290 Infinity II Preparative Column Compartment is a high-end support module for purification workflows. It provides sufficient capacity to store up to four analytical and six preparative columns supporting dimensions from 4.6 to 50 mm inner diameter and 50 to 250 mm length. Five multipurpose slots are available for mounting of valves, delay coils, and further auxiliary purification modules.
The 1260 Infinity II Multicolumn Thermostat (MCT) is a thermostatted HPLC column compartment that provides precise temperature control for up to four columns over a broad temperature range with cooling to 10 degrees below ambient and heating up to 85 °C.
The 1260 Infinity II Preparative Column Organizer is a support module for purification workflows. It provides convenient and stable mounting of a manual injector and easily organizes both analytical and preparative columns from 4.6 to 50 mm inner diameter.
Customized and solution-oriented vacuum chambers by Pfeiffer Vacuum
The 1290 Infinity II Diode Array Detector FS (fixed slit) delivers multiple wavelength detection with full spectra at sampling rates up to 120 Hz for fast LC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects.
The 1290 Infinity II Variable Wavelength Detector enables highest productivity with fast analysis at up to 240 Hz data rates. Even more sample information can be acquired in dual-wavelength mode. Time-programmable wavelength switching provides optimum sensitivity and selectivity for your applications.;
The 1260 Infinity II Diode Array Detector WR offers multiple wavelength and full spectral detection up to a 120 Hz sampling rate. Maximum flexibility is guaranteed with a wide wavelength range of 190 to 950 nm with dual-lamp design, as well as the choice of 15 analytical, preparative, and SFC flow cells. Even at high data rates, the 1260 Infinity II DAD WR enables precise identification, quantification, and peak purity analysi…
The 1260 Infinity II Evaporative Light Scattering Detector (ELSD), although targeted at analytical scale, can also be used with a flow splitter for preparative chromatography applications. It is highly recommended for compounds with little or no UV chromophore, since the detector technique evaporates the solvent and then measures the intensity of the scattered light, which is directly proportional to the sample concentration.
The 1260 Infinity II High-Temperature Evaporative Light Scattering Detector (HTELSD) is capable of detecting very low concentrations of high-molecular-weight polyolefins (polyethylene and polypropylene) at elevated temperatures. The need to analyze ultrahigh-molecular-weight polyethylene (UHMWPE) requires a new detection technique that offers a high level of baseline stability in order to reproducibly detect and permit accurat…
The 1260 Infinity II SFC Control Module is a carbon dioxide conditioning unit for supercritical fluid chromatography. This module pre- and postconditions CO 2 for InfinityLab SFC solutions. CO 2 preconditioning provides for unmatched stability and precision of retention times, and postconditioning enables trouble-free connection to mass spectrometers.
The InfinityLab LC Companion acts as a mobile LC user interface to allow for remote control, monitoring, signal plotting, and diagnostics of Agilent 1260 and 1290 Infinity II LC systems. With the InfinityLab Companion, any mobile device - such as a tablet device or smartphone - with a compatible web browser can be turned into a mobile user interface to quickly check the status of your LC instrument.
Minimise data variability by implementing procedural thawing. Rapidly thaw samples to equilibrium with a thawing station. The Multi thawing station – Ambient utilises ambient air to safely thaw all sample types.
Identify & organise samples with 2D barcoded AlteTubes™. The AltemisLab team have been working with 2D barcoded tubes since they were first used for compound sample storage in drug discovery. Using their expertise and knowledge they have set out to perfect tube design & the subsequent functionality & interaction with all lab workflows. The resultant AlteTube 2D barcoded tube range sets a new standard & a higher level of excel…
Store and track samples easily with all the kit supplied in one cost saving package. Includes; AlteRead SBS rack 2D barcode camera reader, AlteRead Single 2D barcode camera reader, windows laptop with AlteRead software pre-loaded, 1,920 of any size 2D barcoded SBS format AlteTubes & AlteTube selector.
