Materials analysis examines the properties, composition, and behavior of materials at a microscopic and macroscopic level. Using advanced techniques such as microscopy, spectroscopy, and chromatography, materials analysts investigate the structure, purity, and performance of various substances. From industrial materials and nanomaterials to battery testing and beyond, this field provides critical insights into the characteristics and applications of materials across industries such as manufacturing, electronics, and healthcare. Explore how materials analysis drives innovation, quality assurance, and product development for a wide range of applications.
Bleed and Temperature Optimized Non-Stick Septa (BTO) Agilent now treats each premium 11 mm inlet septa to eliminate sticking in the GC inlet. With our premium non-stick septa, you'll never have to scrape bits of septum out of your inlet. Agilent's premium septa also have a recess on the injection side, to guide the syringe needle to the same point with every injection.
Oxygen/moisture adsorbents team up to give you two functionalities in the same trap. Unlike some oxygen/moisture traps, these traps are disposable. Consider the safety, performance, and cost advantages of the Agilent capillary grade oxygen/ moisture traps (0T3) when comparing to heated, catalytic traps. The Agilent OT3 Trap contains a highly active, metal-containing, scrubbing material in an inert, aluminum body. This materi…
Find supplies for the following Teledyne Tekmar purge and trap instrumentation
Agilent's QuickSwap Capillary Flow Technology module and pre-swaged fused silica tubing restrictors can increase the productivity of your Agilent 5973N and 5975 inert MSD systems, allowing you to change columns without venting the MSD. QuickSwap not included.
SilTite (Metal) Ferrules Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. SilTite ferrules are used with Agilent Ultimate Union and other Capillary Flow Technology products, including the Purged Effluent Splitter (G3180B), Deans Switch device (G2855B), and QuickSwap Mass Spec Interface (G3185B).
Even small leaks in the split/splitless injection port can reduce system sensitivity, cause poor signal to noise ration, increase column bleed, and even shorten column lifetime. Using a patent pending manufacturing process, our inlet gold seals eliminate tiny leaks from machining that can negatively impact your GC performance.
Agilent high-quality copper, stainless steel, and UltiMetal Plus tubing are manufactured and cleaned for chromatographic use. Agilent Tubing comes in different lengths and depending on your flow requirements, are available in 1/16 inch, 1/8 inch, or 1/4 inch. UltiMetal Plus tubing comes in 1/16 inch for inert environments.
Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. Graphite-Vespel ferrules can withstand temperatures as high as 280 °C.
Agilent has discontinued the line of Cary 600 series infrared microscopy (Cary 610-FTIR) and chemical imaging systems (Cary 620-FTIR). This includes the Cary 610 and Cary 620 Microscopes and Cary 660 and Cary 670 spectrometers and relevant accessories.
The Agilent Cary WinFLR fluorescence software package for the Agilent Cary Eclipse fluorescence spectrophotometer provides instrument control and analysis capabilities for fluorescence, phosphorescence, chemiluminescence, and bioluminescence.
The Agilent C15 Component Leak Detector is a modular leak-testing package intended for applications in which the leak detector components are integrated into the system. It incorporates Agilent's Contra-Flow vacuum design, which maximizes the protection of its components from contamination in industrial applications. An optional color touch screen display is available for remotely showing all system status information and i…
The PHD-4 sniffer leak detector is a lightweight and rugged sniffer, sensitive to helium concentrations as low as 2 ppm – equivalent to a leak rate of 5 x 10–6 atm-cc/sec, far superior to bubble-testing, dye penetrants, and pressure decay. The sensitivity of the PHD-4 is enabled by Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. With automatic startup, self-test and calibration, the PHD-4…
The worlds fastest and most sensitive CCD detector The Eos CCD is the fastest and most sensitive CCD detector for X-ray diffraction from Agilent or any manufacturer. With an active area of 92 mm diagonal and a gain of 330 e-/X-ray (Mo) the Eos is the highest sensitivity CCD detector available today. It is ideal for the most challenging experiments in small molecule crystallography, providing data collections faster…
The X-Cite® 200DC offers the ultimate combination of optical performance, short term stability and a built-in fast shutter. With the convenience and superior illumination uniformity found in all X-Cite® systems, the X-Cite® 200DC's intuitively easy-to-use design also includes light guide auto-detection to ensure optimized light coupling - every time. Novice and experienced microscopists will enjoy the flexibility provided by t…
The Qsurf is a dynamic BET surface area system designed to offer either single point or multipoint (6) determination of Surface area and total pore volume. The system is unique in that it works as well as a static system (better for low surface areas) and runs in just 15 minutes.
The Pascal systems are convenient benchtop Mersury intrusions systems small enough to operate from inside a fume hood. They offer unrivalled determination of Pore size andparticle distribution
The Sorpty 1990 is a static Gas Adsorbtion system for BET Surface area, Chemisorbtion, and pore analysis .
The Pycnomatic is a Helium Pycnometer with a difference. The system is fast to use and very accurate thanks to a built in peltier cooling system that ensures the analysis is carried out at a stable temperature.
We supply a wide range of GC accessories to fit most common GC systems. We can provide Prep GC, sniffer systems, cryogenic trapping either with a GC or as a retrofit
Optimized Raman Solution for Life Sciences from HORIBA Scientific The XpIoRA INV is an inverted Raman microscope designed specifically for use with biological samples requiring analysis from the bottom and/or open access to the sample from the top. Like all other XpIoRA series of Raman microscopes, the INV features a small footprint, complete automation (autofocus, autoexposure, autovalidation, autocalibration), and ease of us…
AstraTint is an advanced fibre optic coupled spectrophotometer that is dedicated to colour measurement and comparison; its high resolution CCD array detector making measurements in less than 2 seconds. AstraTint shows the sample’s position in the CIE colour space in the lower half of the screen with the L*, a*, b* and x, y, z co-ordinates to the right. If a reference has been measured the values are stored and displayed abov…
The LEG62 is a medium to high resolution 5kV electron source designed for pulse-counting Auger electron spectroscopy (AES). It features four scanning poles enabling both variable position, static AES and scanning Auger maps (SAM). Product detail:Small spot static and scanning electron source for Auger analysis The LEG62 is designed for pulse-counting AES. It features four scanning poles enabling both variable position, static…
The FEG1000 is optimised for Auger analysis at very high spatial resolution with SEM and SAM imaging: High brightness Schotty field emission source High current density 100 nm spot size at 5 nA sample current Fully integrated with the Avantage Windows NT based data system for operation and scanning Product detail: High Resolution, Field Emission Source Electron Gun for SEM, AES and SAM High brightness Schotty field emission…
The UVL-Hi is an ultra-violet source suitable for surface analysis applications such as ultra-violet photoelectron spectroscopy (UPS).Product detail:Small spot size - typically 1.5 mm Very high photon flux - 1.5x 1012 photons/second Choice of light pipe lengths to suit application Effective two-stage differential pumping Air cooled Integral bellows for align…
PicoStar is a state-of-the-art ultrahigh repetition rate, fast gated intensified CCD camera. The camera is ideally suited for use in conjunction with high repetition rate mode-locked lasers. Typical applications are: time-resolved imaging and spectroscopy, fluorescence lifetime imaging microscopy, single molecule or quantum dot imaging and spectroscopy, multifocal multiphoton microscopy, fluorescence resonance energy transfer…
