Environmental monitoring and testing uses handheld portable analyzers, kits, spectrometers or chromatography systems for air, water, soil, food and other sample testing. Useful features of analyzers such as BOD and COD include portability, easy calibration, automation and sensitivity. Environmental test kits for pH, water, moisture, etc, should be accurate, sensitive, reliable, fast and easy to use.
Measure elemental, ionic and total mercury in exhaust stacks from coal-fired boilers and waste incinerators with the Thermo Scientific™ Mercury Freedom System. Meet or exceed performance specifications outlined in U.S. EPA PS-12A and/or Part 75 provisions for continuous Mercury CEM systems in addition to the latest MATS and MACT rules.Ensure complete regulatory compliance with unattended, true continuous monitoring. The Therm…
Providing Ultimate Sensitivity for Vapor Phase and Particulate Isocyanates.The ASSET EZ4-NCO dry sampler for isocyanates is the easy-to-use sampler offering the ultimate sensitivity for collection & measurement of vapor phase and particulate isocyanate monomers and oligomers.Key Features and Benefits:• Ability to achieve reliable, low detection limits• Only device to measure vapor phase and particulate isocyanates• Sampling fo…
Radiello™ Cartridge Adsorbents for sampling HF, NO2, and SO2, matrix microporous PE impregnated with wet TEA.Passive or diffusive sampling relies on the diffusion of analytes through a diffusive surface onto an adsorbent. After sampling, the analytes are chemically desorbed by solvent extraction or thermally desorbed and analyzed. Passive sampling is quiet, non-flammable and does not represent an explosion hazard. It can be pe…
Radiello™ Cartridge Adsorbents for sampling Ammonia (NH3), matrix microporous PE impregnated with phosphoric acid.Passive or diffusive sampling relies on the diffusion of analytes through a diffusive surface onto an adsorbent. After sampling, the analytes are chemically desorbed by solvent extraction or thermally desorbed and analyzed. Passive sampling is quiet, non-flammable and does not represent an explosion hazard. It can…
Radiello™ Cartridge Adsorbents for sampling BTEX and VOCs (CS2 Desorption), matrix SS net (100 mesh, 5.8 mm diam.), activated with activated charcoal (30-50 mesh).Passive or diffusive sampling relies on the diffusion of analytes through a diffusive surface onto an adsorbent. After sampling, the analytes are chemically desorbed by solvent extraction or thermally desorbed and analyzed. Passive sampling is quiet, non-flammable an…
Active Sampling Tubes for Air Monitoring.ORBO sorbent tubes contain two beds of the same selective adsorbent seperated by glass wool or foam, for gas and vapor sampling. The dual-layer or two-bed construction of the tube allows for any sample breakthough to be captured in the smaller back-up bed. Our sorbent tubes contain Supelco′s high quality adsorbents that professionals world-wide trust for their applications. We offer the…
The RESPIROMETRIC Sensor is the VELP measuring sensor designed to perform multiple respiration and degradation tests in a wide range of applications such as Biochemical Oxygen Demand (BOD), Biochemical Methane Potential (BMP), Soil respiration test, Plastic Biodegradability test and more. Together with wireless data transmission to the PC, the RESPIROMETRIC Sensor features exclusive connectivity to the VELP Ermes Cloud Platfo…
2+3+4+5 = Modulyzer: The Prime Class combines robust Anton Paar technology, namely density and refractive index measurement, operated by a sample changer. Depending on the required accuracies, you can choose from 1 of 2 polarimeters + 1 of 3 density meters + 1 of 4 refractometers + 1 of 5 sample changers. The highest level of modularity allows for updates at any time later: you may need density and refractive index results to…
The Jerome® 431 mercury vapor analyzer uses a patented gold film sensor for accurate detection and measurement of toxic mercury concerns for applications such as industrial hygiene monitoring, mercury spill clean up and mercury exclusion testing. Simple push-button operation allows users to measure mercury levels from 0.003 to 0.999 mg/m3 in just seconds. Applications: Mercury Spill Response & Cleanup Mercury Exclusion…
The Model 410 Mercury Analyzer incorporates the Hatch & Ott Cold Vapor Technique for the analysis of trace levels of mercury in drinking, surface and saline waters, as well as domestic and industrial wastes. Features: Detection limit 10 PPT 400 mm Flowcell for lower detection levels Complete analytical system includes Hg Cold Vapor Kit Affordable price perfect for labs with limited budget Quick analysis and rec…
Model HC-404 is a self contained, fixed wavelength infrared analyzer designed for rapid accurate analysis of total petroleum hydrocarbons in water, soil and sludge samples. Features: Fixed wavelength 2930 cm-1 (3.42µ) allows for quick analysis without unnecessary scanning. Digital readout in %T and absorbance, or in concentration mode for direct ppm readings. Accommodates 10, 50, or 100 mm quartz cells for analysis t…
These 300 mL (10oz.) Corning Snap-Seal polypropylene containers are designed for a wide variety of applications and provide a reliable leak-tight seal when closed properly.The Snap-Seal locking device keeps the cap closed and secure.The specially-designed hinged cap stays in place in use, reducing the chance of sample contamination.The containers are graduated in both milliliters and ounces, and the cap has a rough surface for…
These 45 mL (1.5oz.) Corning Snap-Seal polypropylene containers are designed for a wide variety of applications and provide a reliable leak-tight seal when closed properly.The Snap-Seal locking device keeps the cap closed and secure.The specially-designed hinged cap stays in place in use, reducing the chance of sample contamination.The containers are graduated in both milliliters and ounces, and the cap has a rough surface for…
These 120 mL (4oz.) Corning Snap-Seal polypropylene containers are designed for a wide variety of applications and provide a reliable leak-tight seal when closed properly.The Snap-Seal locking device keeps the cap closed and secure.The specially-designed hinged cap stays in place in use, reducing the chance of sample contamination.The containers are graduated in both milliliters and ounces, and the cap has a rough surface for…
These 120 mL (4oz.) Corning Snap-Seal polypropylene containers are designed for a wide variety of applications and provide a reliable leak-tight seal when closed properly.The Snap-Seal locking device keeps the cap closed and secure.The specially-designed hinged cap stays in place in use, reducing the chance of sample contamination.The containers are graduated in both milliliters and ounces, and the cap has a rough surface for…
These 240 mL (8oz.) Corning Snap-Seal polypropylene containers are designed for a wide variety of applications and provide a reliable leak-tight seal when closed properly.The Snap-Seal locking device keeps the cap closed and secure.The specially-designed hinged cap stays in place in use, reducing the chance of sample contamination.The containers are graduated in both milliliters and ounces, and the cap has a rough surface for…
Heliot 900 series has the worlds fastest pumping speed for helium and uses a tablet type user-friendly operator interface that provides the best flexible performance for all of your helium leak testing applications. Features: HELIOT 900 has a very fast pumping speed 5L/sec by ULTRA flow which shortens the time for the helium back ground to drop. Especially when checking for very small leaks. Sensitivity is improved when l…
Envirochek® Accurate results for confident decisions. Envirochek capsules are used for collection and recovery of Cryptosporidium oocysts and Giardia cysts in both finished and source water, including surface water, municipal water supplies, samples in containers, or wells. Approved by regulatory agencies worldwide, including U.S. EPA methods 1622 and 1623, United Kingdom DWI standard operating protocols, and ISO/DIS 15553.Fe…
The CI-340 Handheld Photosynthesis System is a field-ready, lightweight and portable gas exchange monitoring instrument that is easy to operate in the lab or the field.
As new technologies and applications to study environmental, food, water, and exposure contaminants advance, CIL continues to maintain a leadership role working with researchers to develop new standards to meet the latest needs. With new instrumentation and extraction procedures allowing detection limits approaching attogram levels in some cases, the need for highly accurate isotope standards has never been greater.
The F-750 Handheld Brix & Dry Matter Meter uses near-infrared (NIR) spectroscopy to estimate quality metrics such as dry matter, Total Soluble Solids (TSS or brix), titratable acidity, and color.
The F-950 Three Gas Analyzer measures levels of Ethylene, CO2 and O2 to maintain optimal produce quality at every phase of the supply chain.
The F-920 Check It! Gas Analyzer is a device that rapidly measures CO2 and O2 from 0-100%.
The F-940 Store It! Gas Analyzer provides rapid and precise measurements of ethylene, CO2 and O2.
