Products & Reviews

Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ water purification system. This system offers outstanding control, as well as high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off. All GenPure™ systems exceed international standard ASTM Type I, ISO 3696 Grade 1…

(This is suggested replacement for 3056.) The Corning® 25cm² Rectangular Canted Neck Cell Culture Flask features a 25cm² available growth area and is manufactured from optically clear virgin polystyrene. The neck style is canted and cap style is vented. 25cm² available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 1…

With the Sperm Antibody Haemagglutination Test the titer of sperm antibodies is detected in human serum.Antibodies directed against spermatozoa antigens may cause infertility in women or men. The application of the Spermatozoa Antibody Haemagglutination Test is recommended for the diagnosis of immunologically caused disorders of fertility. Unwanted childlessness is a growing problem with which up to 20% of all couples in the r…

These 1L Class A PYREX® mixing volumetric flasks have an upper bulb, located between the Standard Taper stopper and the capacity graduation to assist in the mixing of liquids or powders when shaken. This bulb is approximately one-tenth the flask rated capacity of the flask. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 22 Standard…

Corning® Collagen IV, mouse, 1mg, is used as a thin coating on tissue-culture surfaces to promote cell attachment and proliferation and to study the collagen's effects on cell behavior.SourceSource material tested for HBsAG, for anti-HIV-1 and anti-HIV-2, and anti-HCV virus-1 and virus-2.QualityElectrophoretically homogeneous (SDS-PAGE)Tested and found negative for bacteria, fungi, and mycoplasmaPreparation and StorageStable f…

These 10 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the insc…

These 100 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 13 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 1L Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 22 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the inscri…

These 200 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 13 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 25 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the insc…

These 250 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 16 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 2L Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 27 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the inscri…

These 50 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 9 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the insc…

These 500 mL Class A PYREX® volumetric flasks have machine-blown bodies to which are sealed heavy-beaded, heavy-tubing necks, tooled for No. 19 Standard Taper polyethylene stoppers. The linear high density polyethylene stoppers are made with a closed bottom to conform to Standard Taper stopper dimensions. For replacement stoppers see No. 7624. The graduation line is sharp and permanent and large white block letters make the in…

These 2L Class A PYREX® mixing volumetric flasks have an upper bulb, located between the Standard Taper stopper and the capacity graduation to assist in the mixing of liquids or powders when shaken.. This bulb is approximately one-twentieth capacity the flask. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for No. 27 Standard Taper glass st…

VECTASHIELD® Mounting Medium from Vector Laboratories is an aqueous mountant which does not solidify but remains a viscous liquid on the slide. To mount tissues or cells on a slide, a special pipet is supplied with the product to dispense one drop (approximately 25µl) onto the section. After a cover slip is applied, the VECTASHIELD® Mounting Medium is allowed to disperse over the entire section. (25µl is sufficient for a 22 x…

Convert tap water to both ASTM Type 1 and Type 2 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ water system.

The intrinsic dissolution apparatus provides the dissolution rate of a pure active pharmaceutical ingredient (API) by exposing the API to a constant surface area of dissolution medium.

The MILLIPLEX® MAP Canine Pituitary Magnetic Bead Panel is used for the simultaneous quantification of the following Canine analytes: ACTH, BDNF, FSH, GH, LH, Prolactin, TSH

The MILLIPLEX® MAP Mouse Bone Panel 1Bis used for the simultaneous quantification of the following Mouse analytes: ACTH, IL-6, Insulin, Leptin, Osteocalcin, Osteoprotegerin, TNF-α

The MILLIPLEX® MAP Mouse Bone Panel 2Bis used for the simultaneous quantification of the following Mouse analytes: ACTH, IL-6, Insulin, Leptin, Osteocalcin, RANKL, TNF-α

The MILLIPLEX® MAP Rat Pituitary Magnetic Bead Panel is used for the simultaneous quantification of the following Rat analytes: ACTH, BDNF, FSH, GH, LH, Prolactin, TSH

The Melt Flow Index intrument MI-3 enables to measure the melt-flow-rate (MFR) and the melt-volume-rate (MVR) with a semi-automatic instrument. The MFR is the mass of polymer in grams flowing in 10 minutes through a capillary of a specific diameter and length and with a specific pressure applied by means of weights for prescribed temperatures. The method is given in ASTM D1238 and ISO 1133. This unique melt index instrument ca…

150cm² available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterile Nonpyrogenic

150cm² available growth area Manufactured from optically clear virgin polystyrene Treated for optimal cell attachment Printed with lot numbers for ease in traceability 100% integrity tested Sterile Nonpyrogenic