Non-Destructive Techniques Products & Reviews

General purpose sensors are suitable for contact or non-contact testing of flat, concave, convex and irregularly shaped surfaces. Available for all analyzer models.

A range of Magnetic Particle Materials including wet and dry method powders and speciality products.

The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size and map underfloor corrosion on above ground storage tanks. The FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains signi…

MPF is a magnetic particle suspension fluid designed for wet method magnetic particle inspection requiring a fluid with a flash point over 200F, low viscosity (less than 5.0cs), no odor, no fluorescence, and no yellow color. MPF has a low sulfur and halogen content.

Application• Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys• For tube inside diameter 0.250 inch (6.35mm) and up• Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls• Used in power generation, oil and gas, pulp and paper, and petro-chemical plants• Supports T4 + Saturn techniques for finned tubes• Small and large bore applicat…

Zet@Master is the powerful stand alone equipment of CMS Zet@ range in eddy current testing method. Multi channel and multi frequency, it allows the connection of several EC systems with only one unit to work in all configurations, on line or off line. It is able to drive several lines simultaneously. Deduced for flaws detection on tubes (welded or not), wires, bars, strip and automotive parts, made of austenitic, ferrous and n…

HD - CR 35 NDT, A film replacement technology, Computed Radiography (CR), is actually a digital radiography technique that uses what we called an Image Plate (IP) made of phosphor material to replace film as the imaging media. Like film the IP comes in various format and sizes and it is also flexible like film. After being exposure to radiation during x-ray or gramma ray inspection, these IPs are being scanned by the CR scanne…

With the SENTINEL™Vision HR Digital Radiography System you get state-of-the art imaging quality in a portable, durable and affordable package. Specifically designed for inspections both in the field and in the lab, SENTINEL™Vision HR is a computed radiography system that uses flexible phosphor imaging plates instead of film to create high resolution images. Its rugged portability makes it ideal to use in field conditions, and…

SENTINEL™ Model 880 Delta, Elite and Omega source projectors are portable, lightweight and compact industrial radiographic exposure devices. The patented device body consists of a titanium ‘S’ tube and cast depleted uranium (DU) shield contained within a 300 series stainless steel tube with stainless steel discs welded at each end forming a cylinder shaped housing. The discs are recessed to provide protection for the rear moun…

The BALTOSPOT Series is comprised of three divisions of directional and panoramic x-ray generators with varying specifications corresponding to different NDT applications, field activities and budgets. The CERAM x-ray generators are pulsed wave units available in maximum capacities of 235 and 300kV. They are directional tubes which contain ceramic tubeheads with a copper external anode and a beryllium window.Features Port…

Imperium’s i600 Acoustocam™ generates real time C-scan video images of subsurface defects. The output provides similar information to much more complex legacy systems, but with strikingly clear images. Clients choose the i600 Acoustocam™ because of its ease of use,portability, and broad application set in the market. Current systems require extensive training and skill. In contrast, a user of the i600 Acoustocam can utilize th…

The Gen6™ C-Mode Scanning Acoustic Microscope is the newest generation in Acoustic Microscopy Imaging (AMI) innovation. While taking the best from the Gen5™ (e.g. advanced features, aesthetics, and ergonomics), the Gen6 improves upon the rest and takes acoustic imaging to the next level.The Gen6 delivers the broadest range of capabilities available. Whether your needs are for nondestructive failure analysis, process developmen…

The EMAT Adaptor GS1100 provides a means for current NDT users to benefit from the advantages of non-contact EMAT transducers for pulse-echo flaw detection and thickness guaging, without the large capital outlay of replacing existing piezoelectric based flaw inspection systems and thickness/corrosion monitors. It acts as a bridge between an EMAT probe and a detection system designed for piezoelectric transducers. Designed to w…

The light and compact ultrasonic wall thickness gauge SONOWALL 50 enables the precise measurement of the wall thickness of components made of metal, glass, ceramics and plastics. This efficient device allows the measurement of materials with both flat and curved surfaces. The wall thickness gauge enables the quick and simple detection of the first signs of wear and corrosion, for example, on ships, storage tanks, pipelines and…

The Helix-XT is an ultrasonic based system for inspecting ferrous and nonferrous tubes from the inside. It is based on the Internal Rotating Inspection System (IRIS), which can be applied on almost any material.With the Helix-XT, accurate thickness measurements can be taken at any location along the tube, so small changes in thickness are measurable and the exact location of pitting and corrosion can be determined.The system u…

Phased Array Ultrasonic Flaw DetectorFeatures include: Clear Image Linear Imaging Sector Imaging Accurate Flaw Position and Size Ultrasonic Imaging and A-scan DisplayFunctions include: Easy operation and user-friendly interface. Conventional and phased array modes are available in the same system, which is convenient for inspectors' testing and evaluation. Up to 32 channe…

TOFD Ultrasonic Flaw DetectorFeatures include; Touch Screen Operation Innovative Appearance Intuitive Interface Modular Design.

Fatigue-free 3D visual inspection of small parts and assembliesVDM-E/ZSquinting into a microscope eyepiece all day long for parts inspection can be very uncomfortable. That's why we developed the VDM system.Features: Stable metal stand with small footprint 150W illuminator Real-time color imaging on a 15" LCD monitorThe VDM-E/Z™ is available with two interchangeable optics options: Patented Extended Depth of Field…

MicroXCT-200 - High Resolution and Contrast; Large Sample Size and Shape Flexibility; Automated Multiple Point Imaging. The MicroXCT-200 is a versatile 3D X-ray imaging system suited for non-destructive analysis of a large variety of samples. Its unique design allows for high resolution imaging for relatively large samples. Its detectors are tailored to image both high and low absorption materials. The MicroXCT-200 provides t…

UltraXRM-L200 - Synchrotron-like 3D Imaging in a Laboratory System. The UltraXRM-L200 is the only lab based ultra-high resolution CT scanner for 3D visualization of microscopic sample volumes. Xradia's precision X-ray focusing optics deliver a resolution as fine as 50 nm, seamlessly extending the capabilities of X-ray CT beyond those of conventional scanners. Integrated Zernike phase contrast imaging enhances the visibility o…

VersaXRM-410 - High Resolution and Contrast; Industry-leading 4D and In Situ Capabilities for Flexible Sample Sizes and Types.The VersaXRM-410 encompasses all the benefits of the VersaXRM family of 3D X-ray microscopes for computed tomography. The VersaXRM-410 is uniquely designed to bridge cost/performance standards for a broad range of scientific research. It offers Resolution at a Distance (RaaD™), proprietary Xradia techno…

VersaXRM-500 - Industry's largest working distance at highest resolution. The Xradia VersaXRM™ family is the latest generation of 3D X-ray microscopy (XRM) solutions optimized for non-destructive micro tomography. The VersaXRM-500 advances industry and science with a versatile combination of world-leading resolution and contrast, sample flexibility and the large working distance required to address emerging research challen…

UltraXRM-S200/220 - Energy-tunable, Ultra-high Resolution 3D X-ray Microscopy For Synchrotron Facilities.The UltraXRM-S series harnesses the powerful X-ray beams produced by synchrotron radiation facilities for ultra-high resolution 3D X-ray microscopy. Combined with the superior X-ray imaging technology developed for the laboratory-based UltraXRM-L, the UltraXRM-S series is capable of producing 3D images with 30 nm resolution…

UltraSPX-200/220 - Ultra-high Resolution Analytical Scanning-Probe X-ray Microscope for Synchrotron Facilities. The UltraSPX-S series takes advantage of the coherent X-ray beams available at modern synchrotron light sources to bring established X-ray analytical techniques, such as X-ray fluorescence, spectroscopy, and diffraction down to the nanometer scale. Xradia's high-performance proprietary X-ray optics employed in the U…

Xradia 810 Ultra increases the throughput of nanoscale, three-dimensional X-ray imaging by up to a factor of 10. This innovative X-ray microscope (XRM) operates at 5.4 keV, a lower energy that delivers better contrast and image quality for medium to low Z samples and other materials used throughout science and industry. Better contrast enables higher-quality tomographies to be acquired an order of magnitude faster while achie…