Microplate Seal Products & Reviews

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

Evenly applies film on flat top plates.

Texan reagent reservoirs are reusable - an environmentally sound alternative to disposable reagent reservoirs. Their extra-large capacity means fewer refills and time saved. The V-shaped basin is compatible with both eight and twelve-place multiple pipettors with minimal reagent waste. Lids are removable - attached with ball and socket hinges - and latch tightly for secure storage of left-over reagents. With lids c…

Lazy-L-SpreadersTM disposable microbiological spreaders provide an economical alternative to bending glass rods or pipets for spreading samples on agar surfaces and filters in Petri dishes. They are supplied sterile -no need to flame sterilize or autoclave.Features:unlike glass spreaders, durable polystyrene Lazy-L spreaders are non-breakable and pose no safety hazardL-shaped for convenient "lazy" spreading; just turn the Pet…

Lazy-L-SpreadersTM disposable microbiological spreaders provide an economical alternative to bending glass rods or pipets for spreading samples on agar surfaces and filters in Petri dishes. They are supplied sterile -no need to flame sterilize or autoclave.Features:unlike glass spreaders, durable polystyrene Lazy-L spreaders are non-breakable and pose no safety hazardL-shaped for convenient "lazy" spreading; just turn the Pet…

A 48 um soft non-permeable aluminum foil sealing film with 30 um layer of strong acrylic adhesive. FoilSealTM sealing foils remove cleanly from plate surfaces with no adhesive stringing, residue or contamination. Each sealing foil measures 78.3 x 129 mm and offers sufficient sealing area for all plate types (e.g. flat top and raised-rim). Chamfered corners result in no plate overhang for robotics applications. Features one end…

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

Heat Seals for Microplates

Ultraseal™ Seals for Microplates

For PlateLoc Thermal Microplate Sealer   Keep your microplate heat sealing fast, easy and reliabledont breakup a proven team: Agilents PlateLoc hardware and its growing range of consumable heat seal. Agilent heat seal features high-tech materials intended and validated for life science applications and has the detailed, published specifications to back it up.

MicroLiter was founded in 1996 to supply autosampler vials and consumables for the industry’s leading autosamplers. In 2012, MicroLiter became part of the WHEATON family of products.Since inception, MicroLiter has made the fundamental decision to only offer products that offered proven stable performance and to avoid those products that had a wide range of tolerances which could impede the performance of the autosampler.In add…

Several types of sealing systems are available and different techniques and products can be used including adhesive sealed films and foils, sealing mats and plate lids.

This PCR Seal is a durable transparent polyester film with a strong adhesive layer. This seal enables a high seal integrity and efficiently prevents sample evaporation. It is recommended for PCR, qPCR, and other optical applications (e.g. fluorescence or colorimetric measurements) as well as sample storage.

Peel Seal is a laminate seal compatible with polypropylene plates. It can be removed from polypropylene plates by peeling, even with a plate which has been removed directly from -80°C storage.

Pierce Seal is compatible with polypropylene and polystyrene plates. The seal demonstrates good solvent resistance and can be used for both low temperature and room temperature compound storage in DMSO and organic solvents.

Clear Seal is an optically clear polymer film forming a peelable seal to polypropylene, Polyethylene, polystyrene and Cyclic Olefin Copolymer (COC) plates.

DMSO Resistant Peel Seal is a foil seal compatible with polypropylene and forming an excellent seal to Cyclic Olefin Copolymer (COC) plates.