GC Columns
Robust Results for VOCs and Residual SolventsIncreased temperature limit speeds run times and re-equilibrationPopular choice for residual solvent testing (USP Monograph )Widely used to separate volatile organic flavor and fragrance additives and residual solvents in industrial or pharmaceutical products (OVIs)Equivalent to USP phase G43Recommended UseEPA Methods (501.3, 502.2, 503.1, 524.2, 601, 602, 624, 8010, 8015, 8020, 802…
Drop-In Performance for Chlorinated Pesticides by GC/ECDWhy Pesticide Labs Are Making The SwitchGuaranteed, direct replacement to Restek® Rtx®-CLPesticides columnsResolve multiple chlorinated pesticide classes on one pair with enhanced, fine-tuned selectivityMeet requirements for 7 EPA methods by GC/ECD (8081, 8082, 8151, 504, 505, 508, and 552)Instantly save on every ZB-CLPesticides column and kit with everyday low pricingRec…
Low Bleed Performance for GC/MSVery low bleed (MS Certified) especially suited to high sensitivity GC/MSImproved signal-to-noise ratio for better sensitivity and mass spectral integrityExtremely inert for active compounds such as drugs, pesticides, acids, and basesLower Overall Column ActivityActivity is a key measure of column quality. ZB-1ms columns are aggressively tested to ensure full deactivation.Recommended Applications…
Low Polarity for a Wide Range of SeparationsVersatile column recommended for a wide range of applicationsGreat column for unknown samplesResilient to dirty samples – long column lifeRecommended UseAlkaloids, Dioxins, Drugs, Essential Oils/Flavors, FAMEs, Halo-hydrocarbons, PCBs/Aroclors, Pesticides/Herbicides, Phenols, Residual Solvents
Low Bleed, Intermediate Polarity Selectivity for GC/MSIntermediate polarity column for high molecular weight analysisInert to minimize analyte adsorption, improve efficiency, and reproducibilityMore rugged (longer column life) than other polar phasesExcellent for trace analysis with bleed-sensitive detectors (MS, FID, ECD, NPD)Recommended UseAmines, Aroclors, Drugs, EPA Methods (508, 608, 8081, 8141, 8151), Pesticides, Pharmac…
Performance Up to 430 °CRugged, high temperature stable (430 °C), polyimide-coated fused silica phaseRobust column performance for high temperature bake outsTrue boiling point separation for hydrocarbon distillation methodsRecommended for chemists struggling with high boilers, contaminants, or carry-oversR&D 100 Award-Winning Technology for High Temp TestingWith advanced polymer bonding technology and specialized high temperat…
Rugged Performance Up to 430 °CRugged, high temperature stable (430 °C), polyimide-coated fused silica phaseRobust column performance for high temperature bake outsRecommended for chemists struggling with high boilers, contaminants, or carry-oversWith advanced polymer bonding technology and specialized high temperature polyimide coating, Zebron Inferno columns offer enhanced performance where other columns fail. See how Infern…
Alternate Selectivity for Mid-Polarity AnalysesFast run and re-equilibration times for enhanced sample throughput and productivityProvides alternate selectivity to phenyl phases with similar polarityRecommended UseAlcohols, Amines, Aromatic Hydrocarbons, Drugs, Esters, PAHs, PCBs, Pharmaceutical Intermediates, Phenols, Solvents, Steroids, TMS Sugars, Tranquilizers
Improved Resolution for Free Fatty AcidsPopular choice for food industry method developmentHigh polarity column with excellent thermal and chemical stabilityImprove peak shape for underivatized acids, organic acids, free fatty acids, and alcoholsBonded, solvent rinsable nitroterephthalic acid phaseRecommended UseAcrylates, Alcohols, Aldehydes, Free Fatty Acids, Ketones, Organic Acids, Phenols, Volatile Free Acids
Inferno: Rugged Performance Up to 430 °CNon-metal si-arylene low bleed phase stable to 400 ˚CProvides alternate selectivity to 5% phenyl phasesOften used for confirmation of pesticides, PCB, or other environmental samplesRobust column performance for high temperature bake outsR&D 100 Award-Winning Technology for High Temp TestingWith advanced polymer bonding technology and specialized high temperature polyimide coating, Zebron…
Inferno: Rugged Performance Up to 430 °CFirst non-metal, enhanced durability 35% phenyl phase witih 400 °C temperature stabilityGreat for high molecular weight compoundsRobust column performance for high temperature bake outsRecommended for chemists struggling with high boilers, contaminants, or carry-oversR&D 100 Award-Winning Technology for High Temp TestingWith advanced polymer bonding technology and specialized high temper…
Z-Guard columns are universal GC guard columns, designed for use with virtually any GC capillary column, from virtually any manufacturer. Features: Extends column lifetime by preventing stationary phase damage Improves separation, peak shapes (especially early elutors), sensitivity, and accuracy of quantitative results
The Fast FAME GC Column Reduce run times for traditional FAMEs separations up to 75 % Separate cis/trans FAME isomers with Rs ≥ 1.0 High-cyanopropyl selectivity acceptable for use with AOCS, AOAC, and IOC methods Recommended Use Fatty acid methyl esters (FAMEs), Cis/trans FAME isomers
Zebron™ ZB-PAH-EU and ZB-PAH-CT columns are designed to move conventional PAH testing to the exceptional, Zebron™ GC columns come to life through a coupling of innovative spirit and technical excellence. The Zebron ZB-PAH-EU and ZB-PAH-CT offer unparalleled performance through the power of targeted selectivity when analyzing Polycyclic Aromatic Hydrocarbons (PAHs). Zebron™ ZB-PAH-EU features: Up to 70 % Faster PAH Ana…
The Watercol capillary GC columns allow the qualitative and quantitative analysis of water in a variety of matrices, by GC, eliminating the need for special testing for water.
Zebron ZB-624PLUS is the optimal choice for the analysis of volatile compounds for Environmental, Pharmaceutical, Food, Cannabis, and Specialty Chemicals. The superior "Plus" deactivation process enhances peak shape, improves signal-to-noise levels and increases sensitivity for qualitative and quantitative analysis of active compounds. Upgrade your existing 624 phase to Zebron ZB-624PLUS GC columns and get all the analytical b…
Restek chemists developed the Ultra Carbamate column specifically for carbamates analysis. The unique packing separates 10 target carbamates in just 5 minutes with an 8 minute total cycle time. The column is compatible with fluorescence or LC-MS detection.* An Ultra Carbamate column can process as many as eight samples per hour, versus less than two samples per hour on a general-purpose C18 column. In addition to increased sam…
Employ the most widely used MS phase in gas chromatography with the 5% phenyl phase Thermo Scientific™ TraceGOLD™ TG-5MS GC Column.
Our columns represent a leap forward in performance, delivering low bleed and superior inertness. Select from our comprehensive portfolio of Thermo Scientific GC columns that meet all of your analytical needs and achieve reliable, reproducible results for your gas chromatography (GC) and gas chromatography-mass spectrometry (GC-MS) applications.
Zebron ZB-DHA-PONA is the optimal choice for the analysis of Detailed Hydrocarbon Analysis (DHA) within the Fuel industry. It’s unique Engineered Self Cross-linking™(ESC) stationary phase provides low bleed and exceptional column life for optimal separation of DHA critical pairs with symmetric peaks. In addition, Zebron ZB-DHA-PONA GC columns provide excellent response and peak symmetry for polar oxygenates. Zebron™ ZB-DHA-…
Leverage Your MS Vacuum to Significantly Speed Up Separations
Elite-1, 100% dimethyl polysiloxane, columns are highly versatile, non-polar, cross-linked general purpose columns that are rugged, exhibiting long column lifetime, low bleed, and high maximum operating temperatures.
The Elite-5 is a 5% diphenyl/95% dimethyl polysiloxane stationary phase. It is regarded as a general purpose, low polarity phase that is the most popular GC stationary phase. The Elite-5 is a crosslinked phase in which all residual catalysts and low molecular weight fragments have been removed providing a tight mono-modal distribution and extremely low bleed.
The Elite-5ms phase (5% 1,4-bis(dimethylsiloxy)phenylene, 95% dimethyl polysiloxane) incorporates a phenyl group in the polymer backbone to improve thermal stability, reduce bleed and make the phase less prone to oxidation. This results in inertness to active compounds and extremely low bleed for sensitive MS applications.
