GC Columns Products & Reviews

The Select FAME column is tuned for optimal cis/trans separations of FAMEs, especially the C18 isomers. The bonded column has an isothermal maximum operation temperature of 275°C and a programmed temperature of 290°C - a dramatic improvement of 50°C compared to non-bonded columns. Select FAME has better detection limits because the column has a very low bleed level. Even though this is a very polar column, the column efficienc…

Agilent J&W DB-5ms features an excellent signal-to-noise ratio for analytical applications. 

Agilent J&W HP-5ms has very low bleed characteristics that are ideal for GC/MS. The column has excellent inertness for active compounds, including acidic and basic compounds, and improved signal-to-noise ratio for better sensitivity and mass spectral integrity.

Agilent J&W HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water. 

CP-Wax 52 CB GC columns have lower minimum temperature and a higher maximum temperature than non-bonded polyethylene glycol (PEG) columns due to extensive cross linking, delivering higher resolution of low-boiling-point analytes. With guaranteed reproducibility and excellent temperature stability, CP-Wax 52 CB is ideal for EPA and ASTM methods.

Agilent J&W CP-Sil 88 for Dioxins has a very high polarity and a specific selectivity for dioxin and dibenzofuran separations. The column is supplied with an integrated retention gap to avoid problems with solvent condensation, thus allowing repeated splitless injections without phase deterioration, extending column life. 

Agilent J&W DB-624 is recommended for EPA methods 502.2 and 8021, as well as for fast GC/MS volatiles analysis. It is specifically designed for the analysis of volatile priority pollutants and residual solvents.

Agilent ® J&W™ DB-5ms and HP-5ms Ultra Inert deliver industry-leading analytical performance in a range of chromatographic applications. Very low bleed characteristics and excellent signal-to-noise ratio and peak shapes, enables high levels of performance in analyzing challenging active analytes. DB-5ms  and HP-5ms Ultra Inert are also individually tested with a demanding Ultra Inert test probe mixture, to deliver consistent…

Agilent J&W DB-1ms and HP-1ms Ultra Inert deliver consistent column inertness performance to ensure sensitivity, performance, and integrity. With excellent peak shapes, exceptionally low bleed and high signal-to-noise ratios, DB-1ms and HP-1ms Ultra Inert perform effectively with even the most challenging active analytes.

Agilent J&W DB-FastFAME is a cyanopropyl phase engineered for the fast and selective separation of polysaturated and unsaturated FAMEs—even challenging cis and trans FAME isomers—without sacrificing the resolution generally achieved with traditional 100 meter long columns.

Agilent J&W DB-1ms is a nonpolar, low bleed column, with excellent inertness for acids and bases and an extended upper temperature limit. Using low bleed stationary phases in DB-1ms reduces column contribution to background noise, resulting in a higher signal-to-noise ratio and better sensitivity. 

Rtx®-1 columns exhibit long lifetime and very low bleed at high operating temperatures. A proprietary synthesis process eliminates residual catalysts that could cause degradation and increase bleed. • General purpose columns for solvent impurities, PCB congeners (e.g. Aroclor mixes), simulated distillation, drugs of abuse, gases, natural gas odorants, sulfur compounds, essential oils, hydrocarbons, semivolatiles, pesticides,…

• Wide range of stationary phases offers orthogonal separations. • High thermal stability maximizes system ruggedness and sensitivity. • Unrivaled column inertness for accurate analysis of active compounds. • 0.15, 0.18, and 0.25 mm ID formats accommodate varying sample capacities, speeds, and detectors. • Secondary columns come in convenient 2 m lengths for economical method development. GCxGC is a powerful multidimensional G…

- Optimized column selectivities guarantee resolution of ethanol, internal standards, and frequently encountered interferences. - Robust and reproducible column chemistry ensures longer column lifetime and consistent results. - 2 minute analysis time increases lab productivity. - Stable to 260 °C Don’t forget: Blood alcohol analysis requires dual column confirmation when using GC/FID.

The new line of TRACE™ GC columns offers reliable, reproducible columns for GC and GC/MS to meet all of your analysis needs.TRACE™ TR-1 GC Columns The TRACE TR-1 from Thermo is a general purpose 100% dimethyl polysiloxane non-polar GC column suitable for a wide range of compounds.TRACE™ TR-5 GC Columns The TRACE TR-5 column is a universal GC column used in a wide range of applications.TRACE™ TR-1MS GC ColumnsThe TR-1MS from Th…

Rtx®-VMS Columns (fused silica) (proprietary Crossbond® phase) • Application-specific columns for volatile organic pollutants by GC-MS • Complete separation of U.S. EPA Method 8260B compounds in less than 10 minutes • Stable to 260 °C • No known equivalent phases

The Rtx®-Volatile Amine column was designed specifically for analyzing volatile amines in difficult matrices, such as water. The unique base deactivation creates an exceptionally inert surface for these sensitive compounds, resulting in highly symmetrical peaks which allow low detection limits. The stable bonded phase yields a column that is not only retentive and highly selective for these compounds, but is also very robust…

Restek has raised the bar with a new high-temperature MXT®-Biodiesel TG column line to complement their fused silica column line for biodiesel analysis. These new MXT® -Biodiesel TG columns are stable to 430°C and offer unique retention gap options that minimize dead volume and leaks. Choose either a 0.32mm column factory-coupled to a 0.53mm retention gap, or select a single unit 0.53mm column featuring Integra-Gap™, a built-…

SP-2560 Capillary GC Column• Application: This highly polar biscyanopropyl column was specifically designed for detailed separation of geometricpositional (cis/trans) isomers of fatty acid methyl esters (FAMEs). It is extremely effective for FAME isomer applications.• USP Code: This column meets USP G5 requirements.• Phase: Non-bonded; poly(biscyanopropyl siloxane)• Temp. Limits: Subambient to 250 °C (isothermal or programmed

PEG Versatility for Solvents, Acids, and AminesBonded, solvent rinsable phase excellent for separating polar complex mixturesGC/MS Certified low bleed levelsLow activity for aminesExcellent separations of polar complex mixtures; widely used for profiling and "fingerprinting"Recommended UseAlcohols, Aldehydes, Aromatics, Basic Compounds, Essential Oils, Flavors & Fragrances, Glycols, Pharmaceuticals, Solvents, Styrene, Xylene I…

The Rxi®-PAH GC columns were designed by Restek with a higher phenyl-content stationary phase that provides unique selectivity to separate important polycyclic aromatic hydrocarbons (PAH) for food safety that cannot be distinguished by mass spectrometry. Even difficult priority compounds, such as the European Food Safety Authority (EFSA) PAH4, are easily separated and accurately quantified, results that cannot be achieved on…

Improved resolution and faster analyses, compared to 1701 or phenyl phases, make these the pesticide columns of choice. Rtx®-CLPesticides columns are specially designed to overcome the coelutions and analyte breakdown typically encountered in chlorinated pesticide analyses for EPA Methods 8081, 608, and CLP. By achieving baseline resolution of the 20 target analytes, more accurate qualitative data can be obtained, providing r…

Low Polarity for a Wide Range of SeparationsRugged, high efficiency, and MS Certified low bleedWell-suited for true boiling point separationsExcellent resolving power of critical pairs in complex petrochemical samplesUsed for “fingerprinting” and routine quality control analyses (e.g., citrus oils)Recommended ApplicationsAmines, Drugs, Essential Oils, Ethanol, Gases (Refinery), Hydrocarbons, Mercaptans, MTBE, Natural Gas Odora…

100% Aqueous Stability for Polar Compounds100% aqueous stable, excellent for aqueous samples; bonded and solvent rinseableExtremely inert for acidic compoundsEnhanced selectivity for low boiling solvents; high retention of alcohols and chlorinated solventsIncreased efficiency at 20 °CZB-WAXplus provides optimal selectivity for many aqueous soluble compounds such as those found in alcoholic beverages or glycol samples. The ZB-W…

midpolarity phase; Crossbond® trifluoropropylmethyl polysiloxane