Centrifuge Rotors Products & Reviews

Horizontal centrifugation at high relative centrifugal force Particularly suitable for low sample quantities For pellet formation at bottom of tube At max. speed of 14,000 rpm (max. rcf: 16,400 x g) a temperature of 4 °C is maintained in the 5804R and 5810R

ROTI ® Spin MINI-10 is for purification and concentration of biomolecules and for purification of solutions.

Different combinations of stacked plates can be centrifuged Commercial nucleic acid purification kits up to a maximum height of 85 mm can be used Simultaneous processing of up to 192 samples Max. rotational speed: 3,700 rpm (max. rcf: 2,250 x g) Rotor and buckets are autoclavable (20 min, 121°C)

4 x 400 ml rectangular buckets for high capacity Ideal for medical and biotechnology laboratories: flexible adapters enable high sample throughput Max. rotational speed: 4,000 rpm (max. rcf: 3,250 x g) Caps for aerosol-tight centrifugation* Rotor, buckets, caps, and adapters are autoclavable (20 min, 121°C) * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.

Swinging Bucket Rotor compatible with the new Avanti J-15 Series High Performance Benchtop Centrifuges

Fixed angle rotor compatible with the new Avanti J-15 Series High Performance Benchtop Centrifuges

Microplate carrier compatible with the new Avanti J-15 Series High Performance Benchtop Centrifuges

6 boreholes for different tubes (max. tube size: 85 ml) Max. rotational speed: 11,000 rpm (max. rcf: 15,550 x g) When used in Centrifuge 5810 R: max. rotational speed 12,000 rpm (max. rcf: 18,500 x g) Conical tubes such as 15 ml and 50 ml Falcon® tubes can be centrifuged with adapters in the fixed-angle rotor1) Rotor, caps, adapters are autoclavable (20 min, 121°C) 1) Please observe the limits for tube load-bearing…

Aluminum rotor available with 10 or 30 steel sleeves depending on number of samples Centrifugation of 15 ml Falcon® tubes and glass test tubes Inserts supplied allow symmetrical heterogeneous loading Max. speed of 4,400 rpm (max. rcf of 2,750 x g) ®: Registered trademark of Becton Dickinson

4 x 100 ml rectangular buckets for high capacity Flexible adapters for a wide range of tubes Max. rotational speed: 5,000 rpm (max. rcf: 4,500 x g) Caps for aerosol-tight centrifugation* Rotor, buckets, caps, and adapters are autoclavable (20 min, 121°C) Also available with four buckets for conical 50 ml tubes * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.

All-in-one rotor cross for 4 x 250 ml rectangular buckets and 4 microtiter-plate buckets Flexible adapters for a wide range of tubes Swing-bucket rotor with rectangular buckets: max. rotational speed: 4,000 rpm (max. rcf: 3,200 x g) Rotor, buckets, rectangular buckets, caps, and adapters are autoclavable (20 min, 121°C) Caps for aerosol-tight centrifugation* * Tested by the Centre for Applied Microbiology & Research…

Swing-bucket rotor A-4-62 can be up-graded with 4 MTP buckets to the MTP rotor A-4-62-MTP For up to 16 microtiter plates or 12 culture plates or 4 deepwell plates Swing-bucket rotor with microtiter-plate buckets: max. rotational speed: 4,000 rpm (max. rcf: 2,750 x g) * Tested by the Centre for Applied Microbiology & Research, CAMR, Porton Down, Great Britain.

Swing-bucket rotor A-4-81 can be up-graded with 4 MTP buckets to the MTP rotor A-4-81-MTP For up to 16 microtest plates or 12 culture plates or 4 deepwell plates and all plate stacks of the Perfectprep® Plasmid Kit The functional range in comparison to the A-4-81 MTP can be expanded upon with flex buckets Swing-bucket rotor with microtest plate buckets: max. rotational speed: 4.000 1/min (max. rcf: 2.900 x g)

Simple metal rotor cross Max. speed of 4,400 rpm (max. rcf of 2,800 x g) Centrifugation of 15 ml Falcon® tubes and glass test tubes possible Inserts to fit test tubes have to be ordered separately

Five- to nine-fold increase in the number of cells on a slide.

This is an optional rotor for 6 x 50 mL tubes, for use with Corning® LSE™ Compact Centrifuge.

This is an optional rotor for 12 x 15 mL tubes, for use with Corning® LSE™ Compact Centrifuge.

This is an optional rotor for 6 x 5 mL tubes, for use with Corning® LSE™ Compact Centrifuge.

This is an optional rotor for 18 x 1.5 mL tubes, for use with Corning® LSE™ Compact Centrifuge.

This is an optional rotor for 6 x 5 mL Microcentrifuge Tubes, 6 x 15 mL, 6 x 50 mL or a combination, of these tube sizes together.Features:Maximum Speed: 6,000 rpm/4,387x gEqual G force for all configurationsAccepts both conical and round bottom tubes (not compatible with the stand-alone 50 mL tubes)Increased tube angle for better pelleting with Corning 15 mL and 50 mL centrifuge tubes