Anti-Doping Science Products & Reviews

The 1260 Infinity II Degasser is suitable for analytical applications with flow rates up to 10 mL/min and up to four solvents. It is highly recommended for GPC/SEC applications using refractive index detection. It reduces baseline noise and quenching effects due to high degassing capacity.

Bond Elut C18 is the most hydrophobic, bonded silica sorbent available in the Bond Elut range. It is the most popular SPE sorbent because of its extreme retentive nature for nonpolar compounds. C18 is generally regarded as having the broadest spectrum of retention among bonded silica sorbents, since it retains most organic analytes from aqueous matrices. 

A variety of empty reservoirs is available to increase the sample capacity of Bond Elut extraction cartridges. These tubes can also be used to pack custom SPE cartridges with bulk Bondesil sorbents or other desired sorbent. They are available from 1 to 60 mL. 

Bond Elut PSA is an alkylated amine sorbent that contains two different amino functionalities, one secondary and one primary. This gives a slightly higher pKa and ionic capacity compared to Bond Elut NH2. PSA has a significantly higher carbon load than most amino functional sorbents and thus is a better choice for polar compounds, which retain too strongly on Bond Elut NH2.

Agilent split liners are made to strict dimension specifications for optimal inlet performance and feature the tightest tolerances for od, id, taper and glass wool placement. 

LC Manual Syringes with PTFE-Tipped Plungers

Prevent unknown peaks from impacting your results   Agilent MS Analyzed Vial Kits end the need to pre-test or to rerun samples due to unexpected peaks. Eliminating vials as a source of contamination translates into confidence that your results are accurate and reliable. All MS Analyzed Vials Kits include a Certificate of Analysis that contains true lot-specific and fully traceable LC/MS and GC/MS signal traces as well as criti…

The ZORBAX Eclipse AAA high efficiency HPLC column rapidly separates amino acids following an updated and improved protocol. Total analysis from injection to injection can be achieved in as little as 14 min (10 min analysis time) on the short, 7.5 cm column and 24 min (16 min analysis time) on the 15 cm column length.Exceptional sensitivity (5 - 50 pmol with DAD, FLD) and reliability are achieved using both OPA and FMOC deriv…

Agilent ZORBAX 300Å StableBond columns are an ideal choice for the reproducible separations of proteins and peptides for two reasons. Wide-pore, 300Å columns are necessary for an efficient separation of proteins and peptides, or other large molecules, in order to allow these analytes to completely access the bonded phase. 300StableBond columns are unmatched in their durability at low pH, such as with TFA-containing mobile phas…

The 1260 Infinity II High-Temperature GPC System can provide information about all of today’s engineering polymers such as polyolefins, which are one of the most popular polymers with numerous applications. This level of detail helps with development and to predict how a given batch will process and perform in the final product.

ZORBAX 80Å StableBond columns are made using bulky, patented, unique silanes that sterically protect the siloxane bond. Acid labile endcapping reagents are not used. The result is vastly improved column life and extraordinary chemical and temperature stability in the pH 1–6 range for a wide variety of phases (SB-Aq, SB-C3, SB-CN, SB-Phenyl, SB-C8, and SB-C18). Excellent peak shape is expected for many basic compounds because…

Whether you need to identify, screen, profile, or perform quantitation on complex samples, Agilent Q-TOF is ready. When simultaneous speed, sensitivity, accuracy, and dynamic range come together, you get the most information from your samples. The immense detail revealed is harnessed by MassHunter software to provide answers you can trust. 

The Agilent 6230B TOF LC/MS system provides accurate mass analyses for a variety of analytical applications including profiling, identification, characterization, and quantification of both small and large molecules. Together with advanced accurate mass software processing tools the 6230B supports applications including drug development, toxicology, and the analysis of recombinant proteins.

Making MS operation easierfrom tuning to final report      The all new Agilent MassHunter Workstation software provides intuitive, yet powerful, instrument control, data acquisition, qualitative and quantitative data analysis, and reporting for Agilent time-of-flight (TOF), quadrupole time-of-flight (Q-TOF), ICP-MS, and triple quadrupole systems. Designed from the ground up to make MS analyses easierfrom tuning to final report…

The 1290 Infinity II LC System is an ultra-high performance LC that has market-leading sample capacity and is designed for the lowest dispersion for the most challenging ultra-HPLC experiments. The 1290 Infinity II LC system is designed to be both a HPLC and high-end UHPLC system in a single flow path, giving you robust and excellent performance no matter what application you are running while seamlessly integrating into your…

Agilent offers high- and ultrahigh-performance LC systems customized for applications from routine analysis to specialized workflow solutions. Their preparative HPLC systems provide superior sample purification with excellent recovery.

Raising the standard for mid-range Q-TOF instruments, the Agilent 6545 Accurate-Mass Q-TOF LC/MS system offers higher resolving power and sensitivity that is on the order of five times higher than our earlier workhorse instruments. Incorporating the new fast and powerful SWARM autotune feature, the 6545 enables every user to the get the best results—whether your lab is focused on profiling metabolomics or lipidomics, screenin…

Ultivo presents a transformative approach to LC/TQ and is the newest member of the Agilent Triple Quadrupole family.

Agilent 7250 GC/Q-TOF  Identify. Quantify. Simplify. See the Whole Picture

Leveraging expertise spanning thousands of market-specific applications, Agilent CrossLab consultants partner with you on your site. We assess, develop, and deploy workflows from sample preparation through final report.

The Agilent Thermal Separation Probe (TSP) provides fast analysis of solid, liquid, and slurry samples. The process is simple, clean, and requires limited or zero sample preparation. Non-vaporized high boiling point ‘dirty sample matrix’– compounds, which can contaminate the GC liner and column, remain inside the micro-vial, and can be discarded after each injection. Use the TSP when testing complex samples in food, forensics,…

The all-inclusive, fully validated K6460S Class I Medical Device includes the Agilent 1260 Infinity II LC System Clinical Edition, the K6460 Triple Quadrupole MS system, and the MassHunter Clinical Edition Software Workstation

AdvanceBio Amino Acid Analysis (AAA) includes proven reagents for amino acid derivatization, a ready-to-use amino acid standards kit, columns based on innovative Poroshell technology, and expert support.

J&W GC packed column

Needle assembly, for G1313A, G1329A/B autosampler. Compatible with needle seat G1329-87017 and G1329-87012