Anti-Doping Science Products & Reviews

MAbPac™ SEC– 1 for Monoclonal Antibody (MAb) Analysis MAbPac™ SEC-1 is a size exclusion chromatography (SEC) column designed for monoclonal antibody (MAb) analysis, including monomers, aggregates, and fragments, under non-denaturing conditions, and in both high- and low-salt mobile phases and volatile eluents.SEC is frequently used because of its simple operating principle and features not found in other sep…

The Finnigan LTQ high-performance 2-Dimensional Ion Trap Animations mass spectrometer redefines performance for metabolic and proteomics analyses. Product detail: Finnigan LTQ LC/MSn The Finnigan LTQ linear ion trap mass spectrometer represents a leap in LC/MSn ion trap performance. Combining patented technology from the field-proven LCQ series with advanced designs in linear trap, ion source, optics, and detector techno…

200A pore size;  available in 2.0, 3.0, 3.9, 4.0, 4.6, 10 , 21.2 and 50  mm ids, and lengths from 50 - 250 mm. Pursuit columns are ideal for pharmaceutical applications using LC/MS, from analyzing lead compounds and biological samples in drug discovery, to implementing dependable analysis of raw materials and approved drugs in the QC process.  Build on the large 200A pore size silica, high liquid density delivers up to 40% fas…

Residual Gas Analyzer - RGA100, RGA200 and RGA300 100, 200 and 300 amu systems Better than 1 amu resolution 6 orders of magnitude dynamic range in a single scan 5 x 10-14 Torr detection limit RGA Windows and LabVIEW software Field-replaceable electron multiplier and filament RS-232 (std.) and Ethernet (opt.) interfaces Features and benefits The 100, 200 and 300 amu residual gas analyzers from SRS offer excepti…

The Select FAME column is tuned for optimal cis/trans separations of FAMEs, especially the C18 isomers. The bonded column has an isothermal maximum operation temperature of 275°C and a programmed temperature of 290°C - a dramatic improvement of 50°C compared to non-bonded columns. Select FAME has better detection limits because the column has a very low bleed level. Even though this is a very polar column, the column efficienc…

Agilent J&W DB-5ms features an excellent signal-to-noise ratio for analytical applications. 

Agilent J&W HP-5ms has very low bleed characteristics that are ideal for GC/MS. The column has excellent inertness for active compounds, including acidic and basic compounds, and improved signal-to-noise ratio for better sensitivity and mass spectral integrity.

Agilent J&W HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water. 

CP-Wax 52 CB GC columns have lower minimum temperature and a higher maximum temperature than non-bonded polyethylene glycol (PEG) columns due to extensive cross linking, delivering higher resolution of low-boiling-point analytes. With guaranteed reproducibility and excellent temperature stability, CP-Wax 52 CB is ideal for EPA and ASTM methods.

Agilent J&W CP-Sil 88 for Dioxins has a very high polarity and a specific selectivity for dioxin and dibenzofuran separations. The column is supplied with an integrated retention gap to avoid problems with solvent condensation, thus allowing repeated splitless injections without phase deterioration, extending column life.