Food and Beverage Products & Reviews

Automated high-throughput tissue homogenizer and cell lyser

The SurPASS 3 series features fully automated zeta potential analysis of macroscopic solids under real-life conditions. As electrokinetic analyzers, they employ the classic streaming potential and streaming current method for a direct analysis of the surface zeta potential. The zeta potential is related to the surface charge at a solid/liquid interface and is a key parameter for understanding surface properties and developing…

Built for fast reliable gas analysis. Integrated micro chip technology combined with narrow bore capillary GC columns result in a higher performance for lower costs. The C2V-200 micro GC is designed for ease of use, reduced maintenance, and low gas consumption. Our exchangeable column cartridges, with integrated heating zones, can be easily installed. Analysis in Seconds The integrated micro chip injector ensures precise injec…

CryoELITE Cryogenic Vials are the perfect solution for storing, tracking and transporting your irreplaceable samples. 2D Matrix Bar Code Bottom Insert provides a unique identifier for traceability. Unrivaled Cap Seal exceeds DOT and IATA regulations ensuring ultimate protection of samples during transportation and demanding freeze-thaw handling. Loctagon™ Vial Skirt provides stability in the freestanding position; locks…

The TherMax 500 system specializes in demanding applications where high temperatures, pressures, and aggressive atmospheres are required. Pressure can be used to enhance or speed up reactions. • 100 grams sample capacity • 35 mL sample volume, and under various reaction environments, including corrosive and flammable gases. • From 10-4 torr to 100 bar. The TherMax 500 Pressure TGA can measure samples in a controlled environmen…

Real-Time Trace Impurity Detection The MultiGas™ Purity Analyzer is an FTIR based gas analyzer capable of ppb contaminant detection in high purity bulk process gases such as NH3, NF3, SiF4, and H2. The MultiGas™ Purity Analyzer is composed of a process FTIR Spectrometer, high-optical-throughput internally polished sampling cell, and applications-specific gas analysis software. These integrated components, along with automated…

Restek's new line of fused silica capillary GC columns - Rxi® columns - is now available!  The columns are designed specifically to be the best columns available, for exceptional inertness, ultra-low bleed, and reproducible retention and selectivity. In addition to outstanding performance, this combination of column characteristics assures Rxi® columns will have long lifetimes. The Restek chemists also have developed a sta…

Rxi® fused silica capillary GC columns were designed specifically to be the best columns available, for exceptional inertness, ultra-low bleed, and reproducible retention and selectivity. In addition to outstanding performance, this combination of column characteristics assures Rxi® columns will have long lifetimes. The Restek chemists also have developed a stable, reproducible manufacturing process, so that Rxi® columns will…

Restek's former Rtx®-17 columns are now manufactured using new Rxi® column technology--for unsurpassed inertness, ultra-low bleed, guaranteed reproducibility, and unmatched performance! The new line of fused silica capillary GC columns - Rxi® columns - is now available! These new columns are designed specifically to be the best columns available, for exceptional inertness, ultra-low bleed, and reproducible retention and select…

Q-sep™ QuEChERS Tubes for Pesticide Residue Analysis • Fast, simple sample extraction and cleanup using dSPE. • Fourfold increases in sample throughput. • Fourfold decreases in material cost. • Convenient, ready to use centrifuge tubes with ultra pure, preweighed adsorbent mixes. Quick, Easy, Cheap, Effective, Rugged, and Safe, the QuEChERS ("catchers") method, developed by the USDA Eastern Regional Research Center, has becom…

The DR 2800 Portable Spectrophotometer adds new power to your work, in the lab or in the field Features of the DR 2800 Portable Spectrophotometer include:• Touch screen display with intuitive user interface • USB ports for easy program updates and printer/accessory connections • Over 240 pre-installed analytical methods • Automatic test recognition when used with TNTplus barcoded vial tests • Small footprint • Open measurement…

Transform standard procedures into ultimate performance.

The 2489 UV/Visible Detector is a versatile, dual-wavelength absorbance detector for HPLC. This detector offers the high sensitivity required for routine UV-based applications to low-level impurity identification and quantitative analysis. The 2489 UV/Visible detector’s extended linear range of 2.5 AU makes for easy quantitation of both major and minor components in the same run. You can also simultaneously monitor absorbance…

The Model 1100A series power potentiostat/galvanostat is designed for electrochemical applications that require relatively large current and high compliance voltage, such as battery, corrosion, electrolysis, and electroplating. The current range is ± 2 A. The compliance voltage is ± 26 V. The instrument contains a digital function generator, a data acquisition system, filters for the current signals, iR compensation circuitry,…

MEPS (patent pending) performs the same function as SPE, namely the purification or speciation of samples, but with some significant differences: MEPS works with much smaller samples (as small as 10µL) than full scale SPE MEPS can be fully automated – the sample processing, extraction and injection steps are performed on-line using the same syringe MEPS is applicable to GC and LC Significantly reduces the volume of solvents an…

The Model 600D series is designed for general purpose electrochemical measurements. The figure below shows the block diagram of the instrument. The system contains a fast digital function generator, high speed data acquisition circuitry, potentiostat, and a galvanostat (available only in select models). The potential control range is ±10 V and the current range is ±250 mA. The instrument is capable of measuring current down to…

Performance of the A2 Technologies Exoscan:• Exoscan provides the stability, sensitivity and overall performance to accomplish even difficult applications. A2 Technologies years of experience in designing portable FTIR spectrometers enabled the development of the miniaturized, yet rugged and high throughput Exoscan interferometer and optical system. • Exoscan is a true mid-infrared spectrometer with a frequency range of 4000-6…

The 2998 Photodiode Array (PDA) Detector offers advanced optical detection for Waters analytical HPLC, preparative HPLC, or LC/MS system solutions. Providing unprecedented trace impurity detection and quantitation, the 2998 PDA Detector’s integrated software and optics innovations deliver high chromatographic and spectral sensitivity. Enhanced software control provides flexibility for simultaneous 2D and 3D operation with eith…

A premium inert range of HPLC columns delivering optimal peak shape. The ProteCol™ range of HPLC columns feature proprietary column designs, incorporating inert materials throughout the flow path and the highest quality stationary phases. The combination of these factors delivers unparalleled separation performance. ProteCol™-P features a PEEK™ lining while ProteCol™-G uses a glass lining. Benefits of an inert flow path are: •…

Introducing Waters ACQUITY CSH and XSelect Columns - Powered by CSH Technology Waters patent-pending, Charged Surface Hybrid (CSH™) Technology powers the new Waters ACQUITY CSH and XSelect Column families.CSH Technology columns offer separation scientists a wider range of selectivities and greater performance in LC/MS-compatible mobile phases. Waters CSH Technology empowers UPLCand HPLC systems to provide separations with:Wide…

Rxi® fused silica capillary GC columns were designed specifically to be the best columns available, for exceptional inertness, ultra-low bleed, and reproducible retention and selectivity. In addition to outstanding performance, this combination of column characteristics assures Rxi® columns will have long lifetimes. The Restek chemists also have developed a stable, reproducible manufacturing process, so that Rxi® columns will…

SilTite™ FingerTite is the next generation ferrule system for gas chromatography systems delivering an easy, leak free installation for capillary columns without the use of any tools. Who will benefit from this product? If you are running a capillary column equipped gas chromatography system, SilTite™ FingerTite will simplify your column installation process giving you less hassle and more time for chromatography. GCMS usersSi…

GoTaq®2-Step RT-qPCR System is a reagent system for quantitative analysis of RNA using a two-step reverse transcription-quantitative PCR (RT-qPCR) method. The first step consists of cDNA synthesis using the GoScript™ Reverse Transcription System. Optimized reagents and ultra-active, GoScript™ Reverse Transcriptase result in high-efficiency, full-length cDNA synthesis from rare and abundant targets with up to 5 µg of RNA inp…

GoTaq® Hot Start Polymerase contains the high-performance GoTaq® DNA Polymerase bound to a proprietary antibody that blocks polymerase activity. The system is supplied with a tube of 25mM MgCl2, allowing optimization of the magnesium concentration in your reactions. It is also supplied with 5X Green GoTaq® Flexi Buffer and 5X Colorless GoTaq® Flexi Buffer. The buffers contain a compound that increases sample density, so tha…

GoTaq® Hot Start Master Mixes are premixed, ready-to-use solutions containing GoTaq® Hot Start Polymerase, magnesium, dNTPs and buffer. Reactions can be set up in less than a minute at room temperature; simply add your template, water and primers. Available with either green or colorless reaction buffers, which also serve as loading buffers, allowing you to go directly from thermal cycler to gel analysis. GoTaq® Hot Start Mast…