Lab Automation Products & Reviews

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 384-well plates. AlumaSeal 384TM sealing films have one end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 137.3 mm x 82.5 mm (including single 13.5 mm end tab).Features:heat & cold resistant, recommended for temperatures from -80 °C to +120 °Ccertified DNase-, RNase-, and nucleic-acid-free

A 38 µm thick aluminum foil sealing film with 38 µm layer of acrylic adhesive for use with 96-well plates. Fits inside the rim of raised-rim plates. AlumaSeal 96TM sealing films have one partial-width end tab with no perforations. Pierceable. Available non-sterile only. Sealing film dimensions are 127.0 mm x 77.8 mm (including single 9.5 mm end tab).Features:fits inside rim of raised-rim plateheat & cold resistant, recommended…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

AlumaSeal CSTM sealing films are specially formulated 50 µm aluminum foil sealing films with a 50 µm layer of acrylic adhesive that withstands cold storage at temperatures to -80 °C. Unlike other sealing films in the AlumaSeal group, AlumaSeal CS sealing films are not recommended for PCR or thermocycling. A single non-perforated end tab simplifies application. Simply hold the tab and strip the backing from the body of the seal…

A 140 µm thick hydrophobic porous rayon sealing film including medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. AeraSeal sealing films minimize cross-contamination, spillage and evaporation. They allow uniform air and CO2 exchange for all wells, unlike plate lids which favor exchange for wells near the plate edges. Dimensions: 82.6 by…

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

Easily pierceable, 70 µm thick, polyethylene with acrylic adhesive, EZ-PierceTM sealing films allow direct sample recovery with single or multichannel pipettors and robotic probes. Dimensions are 82.6 by 142.9 mm for 96-well plates.Features:easily pierceable with pipet tips or robotic probesinert, chemical resistantfunctional temperature range -40°C to +90°C

X-PierceTM sealing films are 89 µm thick vinyl with a 18 µm thick adhesive layer, designed for temporary protection from contamination and evaporation for samples in 96-well plates. A precut "X" over each well creates four flaps that easily bend downward when pushed by a robotic probe or pipet tip, allowing sample access without coring or adhesive fouling. A thin adhesive layer and special hairline cuts separating the X-Pierce…

With a 70 µm polyethylene top layer and inert white polypropylene and acrylic adhesive sublayer, this easy-piercing sealing film allows direct sample recovery with single or multichannel pipettors and robotic probes. The adhesive-free zone above each well prevents adhesive fouling of the pipet tip or probe, ultimately minimizing the amount of adhesive that comes into contact with the sample. Dimensions are 79.4 by 142.9 mm for…

BrightMaxTM sealing films are 203 µm thick white vinyl films with 37 µm acrylic adhesive for use with white microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. The light-reflective properties of BrightMax plate-sealing films on clear-bottom plates maximize sensitivity of bioluminescence and chemiluminscence assays in bottom-reading…

AbsorbMaxTM sealing films are 203 µm thick black vinyl films with 37 µm acrylic adhesive for use with 96-well, 384-well, and 1536-well black microplates. The sealing films may be applied to either the top or bottom of the plate. A split backing aids in applying the sealing film properly. Edge cutouts assist in positioning and accomodate ribs on the plate bottom. The light-blocking and absorbing properties of AbsorbMax sealing…

Evenly applies film on raised rim plates.

A 48 um soft non-permeable aluminum foil sealing film with 30 um layer of strong acrylic adhesive. FoilSealTM sealing foils remove cleanly from plate surfaces with no adhesive stringing, residue or contamination. Each sealing foil measures 78.3 x 129 mm and offers sufficient sealing area for all plate types (e.g. flat top and raised-rim). Chamfered corners result in no plate overhang for robotics applications. Features one end…

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

eXTReme™ Seal features an extra-strong, thick adhesive to minimize evaporation yet removes easily without leaving residue on the plate.

The BRAND Liquid Handling Station pipetting robot handles routine tasks at high speed and with the highest precision. The LHS closes the gap between electronic pipettes and highly complex, expensive pipetting robots. It is a quiet and compact instrument with a unique front door allowing it be set up in tight quarters. The instrument has 7 working positions and 5 available liquid ends with single channel volumes up to 1000uL an…

Powerful software for NIR method development

The BRAND Liquid Handling Station (LHS) pipetting robot handles routine tasks at high speed and with the highest precision.

BRAND 96, 384, 1536-well polystyrene and polypropylene microtitration plates are excellent for cell and tissue culture, sample storage, immunological assays, and other applications. BrandTech Plates have 96, 384 and 1536 wells and are available with 330µL or 400µL well volumes. They are fully compatible with most standard plate readers and washers. Both sterile and non-sterile BRAND plates are available with rounded, V-shaped…

Unmatched Single-Cell Analysis with Multiplexing Power

Powered by Adaptive Focused Acoustics® (AFA®) Technology

Powered by Adaptive Focused Acoustics® (AFA®) Technology

Opentrons Flex is everything today’s lab automation systems are not. It’s flexible, versatile and liberating.

Flex Prep offers an affordable entry point into automation, combining easy-to-install hardware with an intuitive walk-up-and-operate interface.

Automated Cell Culture System