Identification and optimization of the chemical, series of chemicals or bio-molecule that will interact with the target using impartial, expert opinion about the best equipment, services and the latest techniques
GC/MS methods are widely used for forensic toxicology, especially for the screening of large numbers of target compounds in complex matrices. Full-scan EI methods offer many advantages for broad-range screening, such as an unlimited number of targets, full-spectrum identity confirmation, and library searching for identification of non-targets. Technologies such as Capillary Flow Technology backflushing, Deconvolution Reporting…
Based on the Agilent 990 Micro GC, this Natural Gas Analyzer offers fast analyses with with easy-to-use software and the ability to calculate all required physical properties.
Purge and Trap (P&T) performs highly sensitive volatile organic compound (VOC) analysis with low carryover, allowing accurate and precise GC and GC/MS determination of VOCs in water, wastewater, soils, and sludges.
Based on the 7890 GC and 5977A Series Single Quadrupole Mass Spectrometer, the GC/MS PAH Analyzer is suitable for analyzing poly-cyclic aromatic hydrocarbons in environmental and food samples.
200A pore size; available in 2.0, 4.6, 10and 21.2 mm ids, and lengths from 50 - 250 mm. Pursuit columns are ideal for pharmaceutical applications using LC/MS, from analyzing lead compounds and biological samples in drug discovery, to implementing dependable analysis of raw materials and approved drugs in the QC process. Build on the large 200A pore size silica, high liquid density delivers up to 40% faster separations witho…
600 bar; superficially porous, 2.7 µm particle6; available in 2.1 - 4.6 mm id; 30 - 150 mm lengths. ZORBAX Eclipse Plus columns feature improved silica, special bonding and optimized endcapping that combine to deliver exceptional peak shapes for a wide range of analytes. Agilent's Poroshell 120 columns have a solid 1.7 µm core and a porous .5 µm outer layer, for a total 2.7 µm particle that delivers high resolution and high…
600 bar; superficially porous, 2.7 µm particle6; available in 2.1 - 4.6 mm id; 30 - 150 mm lengths. ZORBAX Eclipse Plus columns feature improved silica, special bonding and optimized endcapping that combine to deliver exceptional peak shapes for a wide range of analytes. Agilent's Poroshell 120 columns have a solid 1.7 µm core and a porous .5 µm outer layer, for a total 2.7 µm particle that delivers high resolution and high…
400 bar; available in 2.1 - 4.6 mm id; 30, 50, 75, 100, 150 mm lengths. Manufactured by Agilent to rigorous QC specifications, the ZORBAX family encompasses 5 particle sizes and more than 32 phases, for reliable scalability and transferability from HPLC to UHPLC, from lab to lab and around the world.
Extend-C18 columns incorporate a unique patented bidentate silane, combined with a double-endcapping process that protects the silica from dissolution at high pH - up to pH 11.5.
Experience the power of analytical compound isolation
The 1260 Infinity II LC System is a robust HPLC that offers the widest choice of modules for analytical HPLC and entry-level UHPLC, delivering the performance, reliability, and robustness you need for highest confidence in your daily results.
The 1260 Infinity II Bio-Inert Pump is a quaternary UHPLC pump that is made of bio-inert material for use in biological and extreme pH applications. This pump enables gradient formation and solvent blending from up to four solvents and operates at pressures up to 600 bar and flow rates up to 10 mL/min.
The 1290 Infinity II Diode Array Detector (DAD) delivers multiple wavelength detection with full spectra at sampling rates up to 240 Hz for ultrafast UHPLC separations. The Max-Light cartridge cell features optofluidic waveguides, which improve light transmission to near 100% efficiency without sacrificing resolution caused by cell dispersions effects.
The 1260 Infinity II Preparative Autosampler is designed for automated sample handling in routine purification applications. This flow-through vialsampler supports preparative flow rates of 200 mL/min and 600 bar pressure. Increase your daily throughput of purified sample by injecting up to 132 preparative samples with a maximum of 3.6 mL volume.
The 1260 Infinity II Quaternary Pump is a gradient pump that uses low-pressure mixing for UHPLC gradient formation and solvent blending from up to four solvents. This pump operates at pressures up to 600 bar and flow rates up to 10 mL/min.
Bond Elut PRS is a strong cation-exchange sorbent that is also relatively high in polarity. With no appreciable degree of hydrophobicity, in nonpolar solvents, PRS is capable of polar and hydrogen bonding interactions. Due to the very low pKa of PRS, it is recommended for weaker cationic species, such as pyridinium compounds.
Agilent has what you need for precise, effective, sample delivery from your GC autosampler.
Agilent’s Ultra Inert Inlet Liners prevent adsorption and ensure accurate sample transfer onto the GC column through a robust deactivated surface. These liners are recommended for trace level analysis of active analytes. Liners with inert wool retain non-volatiles, prolonging column life and lowering frequency of MS source maintenance.
Agilent offers a complete line of liners for your Agilent GC splitless inlet. Agilent’s proprietary deactivation is important for splitless liners because of the longer sample/liner contact in splitless mode.
Autosampler and Manual Syringes For exacting measurement, transport and delivery of liquids necessary for sample preparation and injection, specify Agilents full suite of manual and autosampler syringes. Designed for accuracy, reliability and ease of use, Agilent syringes enhance productivity and performance through every step of your sample processing.
A revolution in vial crimping and decapping Agilents new ergonomic manual crimpers and decappers remove the pain and discomfort of wrist strain with a lightweight, tailored design. Weighing 25-30% less than predecessors and eliminating sore, pinched hands, the new design dramatically improves user experience. Extensively tested with Agilent vials for optimal fit, and color-coded for ease of use, this tool is a necessity for…
The Agilent Gas Clean Filter System delivers clean gases, reducing the risks of column damage, sensitivity loss, and instrument downtime. Inserting a Gas Clean Filter System in the gas line immediately before the instrument inlet greatly reduces the level of impurities, thus improving trace analysis.
Agilent offers a comprehensive selection of ferrules made of different materials and configurations for a a leak-free connection between the column and injector. Graphite-Vespel ferrules can withstand temperatures as high as 350 °C.
