Materials analysis examines the properties, composition, and behavior of materials at a microscopic and macroscopic level. Using advanced techniques such as microscopy, spectroscopy, and chromatography, materials analysts investigate the structure, purity, and performance of various substances. From industrial materials and nanomaterials to battery testing and beyond, this field provides critical insights into the characteristics and applications of materials across industries such as manufacturing, electronics, and healthcare. Explore how materials analysis drives innovation, quality assurance, and product development for a wide range of applications.
Lovis 2000 M/ME is a rolling-ball viscometer which measures the rolling time of a ball through transparent and opaque liquids according to Hoeppler's falling ball principle. Measurement requires only 100 µL sample volume. Results are given as intrinsic, kinematic or dynamic viscosity. Lovis 2000 M/ME is compact and economical, and saves you space in the lab. The Lovis 2000 M/ME microviscometer is the successor to Anton Paar’s…
L-Vis 510 is an inline viscometer which is immersed directly in the production liquid. It continuously displays the viscosity and temperature of lubricants, starch adhesives, suspensions, and many more process liquids, allowing 24-hour production monitoring.
The QBC ParaLens Advance microscope attachment is a unique solution to fluorescence microscopy in that it combines the critical components of an epi-fluorescence microscope, namely the light source and filter set, with a microscope objective in a compact, durable format that can transform virtually any compound light microscope into an epi-fluorescence microscope. Utilising LED technology, the ParaLens light source lamp has a…
HM-406 Fluorescent Penetrant is a medium-high sensitivity, water-washable fluorescent penetrant for inspecting castings, extrusions, and similar parts. Designed for dip tank use with good self-developing properties. It is a versatile, general purpose penetrant for use on a variety of materials, including aluminum and magnesium castings. Complies with low-sulfur and low-halogen requirements.
BRITEMOR PENETRANT PROCESSES are approved or conform to many internationally recognized specifications. Several processes or individual products are also approved and included in independent company specifications for the inspection of new or overhauled components.CHECKMOR COLOUR CONTRAST (RED DYE) PENETRANT PROCESSES are versatile and economic method of detecting discontinuities which are open to the surfaces of essentially…
The AMIGO instrument is the smallest and lightest ACFM inspection system* available.TSC has taken advantage of its vast wealth of knowledge and experience to make the AMIGO a wieldy, rugged (rated to IP54) instrument that is an ideal tool for site inspections. Specifically designed to function in a wide range of environments the AMIGO has easy-access cabling and large unobstructed buttons which allow the operator to concentrat…
ACFM-7107 is a quadplexer that combines PCS and Cellular duplexers into a single miniature package. Its also features a single antenna connection, eliminating the need for antenna switching. The ACFM-7107 is designed with Avago Technologies' Film Bulk Acoustic Resonator (FBAR) technology. The ACFM-7107 also utilizes Avago's innovative Microcap bonded-wafer, chip scale packaging technology.
The ACPD Crack Microgauge MK IV, for laboratory use, is a rugged instrument with high stability and resolution.It is available with built in multiplexing as an option capable of extension to 128 channels and 4 output currents for monitoring multiple channels.The MK IV can be used with a manual low inductance probe for individual investigations or with an array of fixed or spot welded connections to check on surface or weld toe…
The CGM-7 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the CGM-5R this unit improves upon theCGM-5R specification by offering two channel operation, higher frequency and current outputs, fullcomputer control and a variety of expansion options.It utilises the alternating current potential drop method (ACPD) which is an established techniq…
The FTA Reversing DC Potential Drop System has been designed by Keith Donald to provide the precise current and amplifier stability necessary for the reversing DC potential drop method of monitoring crack size. Custom-manufactured at FTA’s facility, the system is intended to be used in conjunction with the FTA Adwin-Gold Fatigue Crack Growth Rate data acquisition and control testing software, which synchronizes current reversi…
The Digital Barkausen Noise Analyzer - Rollscan 300 - is a fast, easy and reliable way to improve product quality.Rollscan 300 saves on material and labor expensesRollscan 300 is a digital Barkhausen noise analyzer. It is designed for surface quality control and testing of near-surface defects such as grinding burns, involving changes in stress and microstructure in a wide variety of ferritic steel and other ferromagnetic mate…
General purpose sensors are suitable for contact or non-contact testing of flat, concave, convex and irregularly shaped surfaces. Available for all analyzer models.
A range of Magnetic Particle Materials including wet and dry method powders and speciality products.
The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size and map underfloor corrosion on above ground storage tanks. The FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains signi…
MPF is a magnetic particle suspension fluid designed for wet method magnetic particle inspection requiring a fluid with a flash point over 200F, low viscosity (less than 5.0cs), no odor, no fluorescence, and no yellow color. MPF has a low sulfur and halogen content.
Application• Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys• For tube inside diameter 0.250 inch (6.35mm) and up• Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls• Used in power generation, oil and gas, pulp and paper, and petro-chemical plants• Supports T4 + Saturn techniques for finned tubes• Small and large bore applicat…
Zet@Master is the powerful stand alone equipment of CMS Zet@ range in eddy current testing method. Multi channel and multi frequency, it allows the connection of several EC systems with only one unit to work in all configurations, on line or off line. It is able to drive several lines simultaneously. Deduced for flaws detection on tubes (welded or not), wires, bars, strip and automotive parts, made of austenitic, ferrous and n…
HD - CR 35 NDT, A film replacement technology, Computed Radiography (CR), is actually a digital radiography technique that uses what we called an Image Plate (IP) made of phosphor material to replace film as the imaging media. Like film the IP comes in various format and sizes and it is also flexible like film. After being exposure to radiation during x-ray or gramma ray inspection, these IPs are being scanned by the CR scanne…
With the SENTINEL™Vision HR Digital Radiography System you get state-of-the art imaging quality in a portable, durable and affordable package. Specifically designed for inspections both in the field and in the lab, SENTINEL™Vision HR is a computed radiography system that uses flexible phosphor imaging plates instead of film to create high resolution images. Its rugged portability makes it ideal to use in field conditions, and…
SENTINEL™ Model 880 Delta, Elite and Omega source projectors are portable, lightweight and compact industrial radiographic exposure devices. The patented device body consists of a titanium ‘S’ tube and cast depleted uranium (DU) shield contained within a 300 series stainless steel tube with stainless steel discs welded at each end forming a cylinder shaped housing. The discs are recessed to provide protection for the rear moun…
The BALTOSPOT Series is comprised of three divisions of directional and panoramic x-ray generators with varying specifications corresponding to different NDT applications, field activities and budgets. The CERAM x-ray generators are pulsed wave units available in maximum capacities of 235 and 300kV. They are directional tubes which contain ceramic tubeheads with a copper external anode and a beryllium window.Features Port…
Imperium’s i600 Acoustocam™ generates real time C-scan video images of subsurface defects. The output provides similar information to much more complex legacy systems, but with strikingly clear images. Clients choose the i600 Acoustocam™ because of its ease of use,portability, and broad application set in the market. Current systems require extensive training and skill. In contrast, a user of the i600 Acoustocam can utilize th…
The Gen6™ C-Mode Scanning Acoustic Microscope is the newest generation in Acoustic Microscopy Imaging (AMI) innovation. While taking the best from the Gen5™ (e.g. advanced features, aesthetics, and ergonomics), the Gen6 improves upon the rest and takes acoustic imaging to the next level.The Gen6 delivers the broadest range of capabilities available. Whether your needs are for nondestructive failure analysis, process developmen…
The EMAT Adaptor GS1100 provides a means for current NDT users to benefit from the advantages of non-contact EMAT transducers for pulse-echo flaw detection and thickness guaging, without the large capital outlay of replacing existing piezoelectric based flaw inspection systems and thickness/corrosion monitors. It acts as a bridge between an EMAT probe and a detection system designed for piezoelectric transducers. Designed to w…
The light and compact ultrasonic wall thickness gauge SONOWALL 50 enables the precise measurement of the wall thickness of components made of metal, glass, ceramics and plastics. This efficient device allows the measurement of materials with both flat and curved surfaces. The wall thickness gauge enables the quick and simple detection of the first signs of wear and corrosion, for example, on ships, storage tanks, pipelines and…
