Electrophysiology Products & Reviews

The In-Vivo motorised micromanipulator (IVM) was developed to meet the requirements of the most demanding in-vivo applications. High quality materials and precision assembly, along with the super smooth motion and long travel means that the IVM is stable, versatile and low-noise. It’s perfectly suited to electrophysiology and microinjection procedures and is available with single or three axes of motion. Features: • Ultra stab…

The Scientifica Universal Motorised Stage (UMS) provides rapid, accurate and intuitive remote control translation of your microscope around a sample. Designed to be used in combination with a fixed nose microscopy platform, the 400mm x 200mm UMS provides complete microscope support and the 50mm of travel in both the X and Y axes allows you to roam the largest of samples. An optional Z axis focus control is also available provi…

The DP-301 is a single channel AC/DC differential pre-amplifier highly suited for EEG, EKG and extracellular recording. High input impedance High common mode rejection Low noise with high gain High tolerance to DC offsets Bandwidth filtering available High Input Z, High CMR High common mode rejection is very important in minimizing electrical interference. The high input resistance of the DP-301 (1012 ohm typical…

Comprehensive electrophysiology data acquisition and analysis software. Provides both sweep-oriented stimulation and continuous data acquisition along with online analysis. Analyses all types of data: patch-clamp I-V, action potentials, minis and single-channel. Includes graphing and layout capability. pCLAMP 10 is shipped with the following:o pCLAMP 10 CD (Part number 1-2700-0167)o pCLAMP 10 USB security key (Part number 1…

* Slices maintained for many hours prior to transfer to recording chamber* Simple to set up and maintain * Many slices supported on FOUR quick-change nylon netsThe Brain Slice Keeper 4 has been designed to pre-incubate brain slices prior to transfer into recording chambers. It consists of FOUR pairs of closely fitting acrylic rings, upper and lower, between which is wedged a sheet of nylon netting. In operation, it is totally…

The QPatch HT and QPatch HTX enable high-throughput patch clamping with 48 parallel recording sites. Automated patch clamping with the same high quality afforded by conventional patch clamping can now be applied in all phases of ion channel drug discovery, including primary screening of focused compound libraries. • Up to 7000 data points per day • Screening and compound profiling • Multi-hole and single-hole mode (QPatch HT…

Economical model featuring leading-edge technologies. The MMN-3 is a three-dimensional coarse manipulator without the X-axis fine movement provided on the MM-3. X- and Z-axis handles are placed on both sides, for use by both left- and right-handed operators. The handles also feature hardness adjustment to prevent them from dropping under their own weight and thus causing drift.

Series RC-20 Fast Exchange Open Bath Recording and Imaging Chambers are available in 40µl (RC-24) and 50µl (RC-24E). The bath volume in these two models is the smallest of the open style chambers. This design allows very fast solution exchange for a variety of applications including patch clamp and studies in electrophysiology. The small bath volumes are especially useful when using drugs in small quantities. Both models are u…

The CMA 110 Liquid Switch permits manual switching between up to three perfusion lines (syringes) and a microdialysis probe. This makes it possible to change different solutions instantaneously without any risk of introducing air bubbles into the microdialysis probe. • Instantly switch between syringes • Prevents introduction of air bubbles • No interruption of flow

0.25 g, 1.6 μm diameter, gold microcarriers for use with the PDS-1000/He and Helios gene gun systems

0.25 g, 1.0 μm diameter, gold microcarriers for use with the PDS-1000/He and Helios gene gun systems

0.25 g, 0.6 μm diameter, gold microcarriers for use with the PDS-1000/He and Helios gene gun systems.

The Gene Pulser Xcell™ system is a modular electroporation system for transfecting every cell type. The system includes a main unit, a ShockPod™ cuvette chamber, and your choice of accessory modules: the capacitance extender (CE module) and the pulse controller (PC module)

The Gene Pulser Xcell™ system is a modular electroporation system for transfecting every cell type. The system includes a main unit, a ShockPod™ cuvette chamber, and your choice of accessory modules: the capacitance extender (CE module) and the pulse controller (PC module)

100/240 V, 50/60 Hz, electroporator, includes main unit, CE and PC modules, shocking chamber, 15 sterile electroporation cuvettes (5 each of 0.1, 0.2, and 0.4 cm electrode gap), cuvette rack

ACE2 and Spike Protein Cell Lines, Immune Checkpoint Cell Lines, Fc Receptor Cell Lines, GPCR Stable Cell Lines, Claudin 18.2 Cell Lines

The AVENIO Tumor Tissue CGP Kit is an in-house next-generation sequencing (NGS) research assay that provides comprehensive genomic profiling of solid tumors from formalin-fixed paraffin-embedded (FFPE) tissue samples. Designed to match the content of the 324-gene FoundationOne® CDx panel, the kit leverages the proven technology of Foundation Medicine and Roche’s expertise to help your lab obtain reliable genomic insights.

An affordable MEA system for every lab

Integrated Patch Clamp Amplifiers with Data Acquisition System

LOW-NOISE ULTRA-FAST DIGITAL PATCH CLAMP AMPLIFIER SYSTEM

SutterPatch Data Acquisition, Management and Analysis Software

XenoWorks, a modular system designed to meet a wide variety of microinjection application needs. Our experience with precision motor control has culminated in this state of the art system. Features:XenoWorks Micromanipulator: Exceptionally smooth and responsive micropipette movement Six movement sensitivities Height- and tension-adjustable inverted joystick for optimal ergonomics Up to 25mm of movement in three axes…

Designed primarily for transgenic mammal workstations, the XenoWorks Digital Microinjector is capable of holding oocytes and early embryos immobile while simultaneously providing a separate pressure channel for pronuclear microinjection of DNA or the gentle control of embryonic stem cells as they are transferred into blastocysts. Features of the XenoWorks Digital Microinjector:• Built-in compressor with remote user interface •…

The Manual Injector is a manual syringe driver for pneumatic or hydraulic control of injection needles or holding pipettes. It is suitable for injecting volumes in the nanoliter to microliter range. It is also widely used as a fluid control device for applications requiring sensitive manual control of the displacement of microneedle contents. The system is constructed from the highest quality parts. The base assembly is black…

Sutter Instrument Company, in addition to the finest micropipette pullers available, offers a wide selection of high quality capillary glasses in various sizes and materials. Though there are many types and sizes of capillary glass available, we have carefully selected only those that pass our criteria. Our expertise in micropipette technology assures you of precision and high quality. Types of glass available: Borosilica…