Laboratory pumps are devices used to move liquids and gases by vacuum or positive displacement. The pressures/vacuums generated are determined by the type of pump used. High vacuum pumps include diffusion, ion, roots and turbopumps; for primary/medium vacuum applications see rotary vane pumps, scroll & diaphragm pumps. For the positive displacement of liquids explore a range of syringe and peristaltic pumps, as well as fluid aspirators. Discover the best pumps in our peer-reviewed product directory: compare products, check customer reviews and receive pricing direct from manufacturers.
The Agilent TriScroll 300 Inverter pump is a dry scroll pump that operates at a speed of 15 m3/h (250 L/min). The pump combines the benefits of frequency inverter technology and the performance of Agilent TriScroll vacuum pumps. The TriScroll 300 Inverter pump employs frequency inverter technology that delivers optimal and consistent performance at any voltage and frequency conditions worldwide. The frequent maintenance req…
Agilent's TriScroll Inverter pumps combine the benefits of frequency inverter technology and the performance of Agilent TriScroll dry primary vacuum pumps.
Agilent's unique, patented TriScroll series features two-stage dry scroll pumps that deliver high pumping speeds and low base pressure.
The PHD-4 sniffer leak detector is a lightweight and rugged sniffer, sensitive to helium concentrations as low as 2 ppm – equivalent to a leak rate of 5 x 10–6 atm-cc/sec, far superior to bubble-testing, dye penetrants, and pressure decay. The sensitivity of the PHD-4 is enabled by Agilent’s proprietary and patented SIPD (Selective Ion Pump Detection) technology. With automatic startup, self-test and calibration, the PHD-4…
The DS-102 is a dual-stage oil-sealed rotary vane pump that delivers a pumping speed of 5.0 m3/hr at 50 Hz, or 3.5 CFM at 60 Hz, with a base pressure of < 2 x 10-3 mbar. The DS-102 has a 'universal-voltage' single-phase electric motor rated for < 0.55 kW, with integral power switch. An inlet isolation valve is integrated into the pump to close off the inlet port whenever power to the pump is interrupted. This antibackstream…
The DS-202 is a dual-stage oil-sealed rotary vane pump that delivers a pumping speed of 8.3 m3/hr at 50 Hz, or 5.8 CFM at 60 Hz, and a base pressure of < 2 x 10-3 mbar. The DS-102 has a low sound pressure, and has a 'universal-voltage' single-phase electric motor rated for < 0.55 kW, with integral power switch. An inlet isolation valve is integrated into the pump to close off the inlet port whenever power to the pump is int…
The DS-302 is a dual-stage oil-sealed rotary vane pump that delivers a pumping speed of 11.6 m3/hr at 50 Hz, or 8.2 CFM at 60 Hz, and a base pressure of < 2 x 10-3 mbar. The DS-302 operates at a very quiet sound pressure, with a 'universal-voltage' single-phase electric motor, rated for < 0.55 kW, with integral power switch. An inlet isolation valve is integrated into the pump to close off the inlet port whenever power to t…
The DS-402 is a dual-stage oil-sealed rotary vane pump that delivers a pumping speed of 17.4 m3/hr / 12.3 CFM, and a base pressure of < 2 x 10-3 mbar. The DS-is available with a 'universal-voltage' single-phase motor rated for < 0.9 kW, with integral power switch a 3Ф motor is also available. An inlet isolation valve is integrated into the pump to close off the inlet port whenever power to the pump is interrupted. This anti…
The DS-602 is a dual-stage, oil-sealed rotary vane pump that delivers a pumping speed of 25.0 L/min / 17.6 CFM, and a base pressure of < 2 x 10-3 mbar. The DS-602 operates at a very quiet sound pressure, and is available with either a 'universal-voltage' single-phase 0.9 kW motor, with integral power switch, or optional three-phase motor. An inlet isolation valve is integrated into the pump to close off the inlet port whene…
The TPS-mobile is a customizable, high-capacity pumping system on the smallest footprint roll-around cart. Choose from more than 400 possible configurations consisting of small- and medium-sized TwisTorr turbomolecular pumps with pumping speeds from 70–700 L/s and backed by either an IDP or TriScroll dry scroll pump with 3–30 m 3 /hr pumping speed or DS rotary vane pumps with 6–30 m 3 /hr pumping speed. The vast selection of…
The Agilent FRG-700 Gauge is a full range gauge that provides two measuring technologies in a single, compact and economical package to measure process and base pressure from 5 x 10-9 mbar to atmosphere (3.8 x 10-9 Torr to atmosphere).
miVac is a range of centrifugal vacuum concentrators and freeze driers capable of removing water and organic solvents from a variety of sample formats including tubes, microplates, and vials. miVac concentrators come in 2 sizes, the smaller Duo and a larger Quattro. There is a choice of vacuum pump and rotor according to application and sample format. To speed concentration built-in special runs for working with water and…
miVac oil free vacuum pumps can be used with miVac vacuum concentrators or stand alone for use with other suitable vacuum applications in the laboratory. There is a range of three pumps available: Duo pump, 10mbar PTFE diaphragm pump, 38 litres per minute flow rate. Quattro pump, 1mbar PTFE diaphragm pump, 17 litres per minute flow rate. Supoerl pump, 0.3mbar scroll pump, 83 litres per minute flow rate.
The PDS-100 is a Programmable Dispensing System which uses precision stepper motors to control FMI “Q” and “RH” pump models including STQP, STQ, STH, & STRH in all piston sizes. The FMI pumps are integrally mounted to the programmable controller. The controller contains the stepper motors and driver electronics, and is a rugged anodized aluminum design. Several single and dual pump configurations are available including a dua…
PiP Pumps micro π-petter - Pipetting, Syringing and Diluting Ideal for repetitive and volumetric dispensing of acids, solvents and aqueous solutions. Model "PiP" Precision Dilutor Features: FMI's unique low dead-volume pump heads, and synchronous motor drives. Can act as a single shot dispenser using the hand/foot switch or as a single metering pump in the continuous mode. Using a combination of forwar…
The V300 is Ideal for R&D, Laboratory, Process, Test Stands, and Production. FMI's V300 is a variable stroke rate metering pump system that drives FMI pumps from 5% to 100% of their rated flow with 0.1% adjustability. Typical speed rates for the direct drive system are 90 to 1800 strokes per minute. The system repeatability is 1%.The V300 comprised of a 90 volt DC pump drive module (PDM) with integrally mounted pump head modu…
Offering an expanded flow range, the Thermo Scientific™ Miniflex is ideal for applications that require precision in liquid transfer, metering, sampling or filling at a range of flow rates. The broad flow rate range (0.04 to 370mL per minute) is made possible by the over-center cam design and automatic tubing retention system that permits quick tubing changes without adjustment. Available in both single and dual channel versi…
Wheaton peristaltic pumps are used for dispensing and general liquid handling purposes. The pumps are delivered ready to use with tubing kits included. The pumps can be programmed to dispense measured aliquots into culture plates, vials, tubes or bottles. The Omnispense units have additional features including speed ramping and totalizer/flow mode. Features: Includes complete pump, instruction manual and tubing kits. Works…
Wheaton peristaltic pumps are used for dispensing and general liquid handling purposes. The pumps are delivered ready to use with tubing kits included. The pumps can be programmed to dispense measured aliquots into culture plates, vials, tubes or bottles. Includes complete pump, instruction manual and tubing kits. Works with 2.3mm thick tubing. Additional pump heads and foot switches available. Features: Icon driven user in…
The Corning® Aspirator is a device using vacuum to safely and aseptically dispose of supernatant from a variety of laboratory vessels. The aspirator includes a hand piece to which disposable pipet tips are attached during use, a grommet for accessory attachment and single-channel adapter for disposable pipet tips.An 8-channel adapter is available for working in 96 well plates, see No. 4931. Refer to the accessories tab below.
This is an 8-channel adapter that fits on the Costar® Aspirator (No. 4930) so that it can be used to remove media and solutions from 8 wells simultaneously on a 96 well plate. Refer to the accessories tab below.
2 and 3-way solenoid valves used to control the flow of liquids and gases. With these kinds of valves, the fluid is in contact with the valve's metal plunger. LHD SERIES SOLENOID VALVES Lee's High Density Interface (LHD Series) Solenoid Valves are designed for applications where space is limited. Featuring small size and light weight without sacrificing performance and reliability, the valves are available in three…
2-way, high speed valves used to dispense small amounts of fluids. VHS SERIES SOLENOID VALVES The Lee VHS valves are high speed, 2-way solenoid operated valves designed for applications requiring microliter and nanoliter dispense volumes. These applications include high throughput screening and drug discovery. The VHS valves feature: High speed operation: up to 1200 Hz Long life: 250 million cycles minimu…
2 and 3-way valves that separate the working fluid (or gas) from the metal components of the valve. These are typically used with more aggressive liquids. LFV SERIES SOLENOID VALVES The LFV Series is a family of 2-way isolation valves, featuring bi-directional flow and a contoured flow path which allows complete flushing. This contoured flow path also minimizes damage to "delicate" fluids. The small internal volume…
