Environmental Analyzers
The MTL-5 is a compact, user-friendly, bench-top TEA (Transverse Excited Atmospheric Pressure) pumped CO2 Laser. The MTL-5 features self-diagnostic testing and built-in, fail safe mechanisms designed to monitor system performance and to support system integrity. The laser offers high performance specifications for a variety of scientific and specialist applications. The MTL-5 can be operated in either multi-mode or single mode…
The PL series of continuous wave (CW), grating tuned, infra-red gas lasers sets the standard for high power, stable sources for a wide variety of applications from molecular spectroscopy, non-linear optics, interferometry, process control, atmospheric studies, plasma density measurements and much, much more. The PL-series of lasers include grating tuned CO2 lasers with a step tunable wavelength from 9-11μm with single line pow…
AstraGuard uses advanced CCD array, fibre optic coupled spectroscopy to continuously monitor organic levels in the treatment of drinking, process and waste water. The UV absorbance of water at 254nm is a reliable indicator of its aromatic organic carbon content; many studies have proven a correlation with the traditional laboratory tests like TOC, BOD, COD and DOC. The ease of implementing UV254 as a continuous monitoring syst…
GDX600 is designed for gas dosing from 0.35 nanoLiters/minute - suitable for aggressive, toxic and combustible gases. In combination with a MFC calibration gases can be prepared from pure gases or gas mixtures down to the ppb range.
GMS500 for preparation of calibration gases - is a PC controlled gas blending system with thermal mass flow controllers - designed for the use of aggressive, toxic and combustibel gases.
GMS500 for preparation of calibration gases - is a low-cost - PC controlled gas blending system with thermal mass flow controllers - not suitable for aggressive gases.
The FIAstar™ 5000 System is used for the automatic wet chemical analysis of nutrients and other parameters in water, soil and wine, as well as in meat or other food products. Single or multiple parameters can be analysed sequentially using just one Analyser module and Plug & Analyse Method Cassettes. The modular system can be expanded for the simultaneous determination of up to three parameters.The Plug & Analyse concept ensur…
The Thermo Scientific Developmental Neurotoxicity Panel is the only proven method for analyzing the effect of industrial chemicals on neuronal morphological chemicals in food, consumer products and the environment. The widespread use of these chemicals has led to fears of a link between exposure to such chemicals and the increased incidence of neurological disorders in children. The assay uses Neuroscreen (NS-1) cells, a subcl…
Environmental Monitoring Software Program Environmental Monitoring Program is an application capable of capturing all environmental data in a 21 CFR Part 11 Compliant, fully validated system. It is envisioned for sterile and non sterile health care industries (Pharmaceuticals, Biotech, Chemical, microbiological) food and any other sterile environment based on the latest guidelines from, FDA, EU, ISO 14644-1 and PDA Technical…
The CAI ZRE NDIR analyzer is based on the infrared absorption characteristics of gases. Us ing a single infrared beam to measure gas concentrations, the ZRE produces highly stable and reliable results. A single infrared light beam is modulated by a chopper system and passed through a sample cell of predetermined length containing the gas sample to be analyzed. As the beam passes through the cell, the sample gas absorbs some o…
The CONFOCHECK is a dedicated FTIR system for the investigation of proteins in water. Its specific configuration facilitates a fast data acquisition (ca. 30 sec. per sample) with a high sample throughput controlled by an extremely user friendly software interface. Main applications for the CONFOCHECK are the detection and quantification of conformational changes in proteins and the protein concentration determination. Quant…
The CAI 600P & 600F digital analyzer is designed around a state-of-the-art 16-bit microprocessor, c an be manually or remotely operated, has precision measurements and more. The California Analytical Models 600P & 600F digital analyzer product line is designed around a state of the art 16 bit microprocessor, with 16 digital inputs, 16 digital outputs, 16 analog inputs and 4 analog outputs. The analyzer can be manually operate…
This method is based on the fluorescence of SO2 due to absorption of ultraviolet (UV) energy. A UV lamp emits ultraviolet radiation that passes through a filter which excites the SO2 molecules and produces light which is measured by a photomultiplier tube (PMT). UV Fluorescence Analyzer(s) Highlights: New Compact PMT Integrated PMT Peltier Cooling 10,000 Hour Ultraviolet Lamp Optional CO2 or O2 Channel Compact Size…
FTIR Spectroscopy is an analytical technique which measures the infrared intensity versus wavelength (wave number) of light. The FTIR Spectrometer obtains infrared spectra by collecting an interferogram of a sample signal with an interferometer. FTIR Analyzer(s) Highlights: No Liquid Nitrogen Required Compact, Industrial Design w/Fast Repsonse Proven Rugged Interferometer with Gold Mirrors Heated Standard Stainless St…
In Photoacoustic Spectroscopy (PAS) the gas to be measured is irradiated by modulated light of a pre-selected wavelength. The gas molecules absorb some of the light energy and convert it into an acoustic signal which is detected by a microphone. Photoacoustic IR Analyzer(s) Highlights: Low Sensitivity (From ppb to Percent Levels) Yearly Calibration Minimal Maintenance Measures up to Five Gases + H2O Temperature and…
The CAI NOxBox system has been specifically designed for harsh environment condition s frequently found in outdoor selective catalytic reactor applications. The analyzer system is housed in a Nema 4 enclosure with a front lockable door. The enclosure contains a heating and cooling system to maintain a constant internal temperature for the gas analyzer and interface equipment regardless of outside environmental effects. The sa…
The CAI Mark 3 Intelligent Sampling System is a third generation single board computer controlled industrial sequencer. The system has been developed over many years as higher specifications components have been added to the proven single board computers on the Mark 1 and Mark 2 Samplers. These have been in production for over 15 years. CAI specialize in custom building these systems and are able to modify and write special s…
This competitively-priced, single-channel dissolved oxygen meter is easy to set up and use while providing reliable, accurate DO measurement for water analysis and general laboratory applications. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features. It offers enhanced stability indicators, salinity correction and automatic barometric pressure compensation—…
This waterproof, battery-operated DO meter stands up to the most demanding water analysis applications and delivers over 2,000 hours of continuous operation. Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features. It offers enhanced stability indica…
This waterproof, battery-operated pH/DO meter stands up to the most demanding water analysis applications and delivers over 2,000 hours of continuous operation. Convenient Quick-Start Guide is located on the back of the meter to make the unit easy to operate in the field. The rugged meter displays DO concentration or percent DO Saturation and offers a full complement of GLP-related features—including available 21 CFR Part 11…
Biochemical oxygen demand (BOD) determination is still one of the most important parameters in water resource management. It can be used to evaluate the impact of biodegradable substances in waters and waster water. With its OxiTop ® systems, WTW offers a unique, modular and mercury-free instrument system. It is not only suitable for BOD determination, but also for measuring biodegradability and deple-tion.The advantages of Ox…
Complete packages for 6 or 12 simultaneous measurementsMeasurement using OxiTop ® is based on pressure measurement in a closed system: microorganisms in the sample consume the oxy-gen and form CO 2 . This is absorbed by NaOH, creating a vacuum which can be read directly as a measured value in mg/l BOD.The used sample volume regulates the amount of oxygen available for a complete BOD. Measurement ranges of up to 4,000 mg/l can…
Complete package for 6 or 12 simultaneous measurements – For a larger number of samples and with simple sample measurement OxiTop ® Control is the logical further development of the successful OxiTop ® system using software-controlled functions and infrared interface to communicate with a handy controller, the OC 100. This system enables the simultaneous and grouped start, management, storage and tracking of 100 measuring head…
common featuresSimultaneous sample management with option of grouping up to 100 OxiTop ® -C measuring heads.Data call-up of one parallel sample with statistical evaluation and as individual data.Automatic calculation and graphical display of BOD value.Data transfer even through glass doors.Protocol and documentation of data via Achat OC commu-nication program in combination with a PCGLP and AQS with inspection intervals for ca…
