Electromagnetic Testing (ET)
The SurPASS 3 series features fully automated zeta potential analysis of macroscopic solids under real-life conditions. As electrokinetic analyzers, they employ the classic streaming potential and streaming current method for a direct analysis of the surface zeta potential. The zeta potential is related to the surface charge at a solid/liquid interface and is a key parameter for understanding surface properties and developing…
The DCM-2 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the DCM-1 this unit takes on boardcustomer comments and suggestions, as shown in its impressive features list.It utilises the pulsed current potential drop method (DCPD) which is an established technique alsocovered by the ASTM 647 standard. The technique involves passing a constant…
The AMIGO instrument is the smallest and lightest ACFM inspection system* available.TSC has taken advantage of its vast wealth of knowledge and experience to make the AMIGO a wieldy, rugged (rated to IP54) instrument that is an ideal tool for site inspections. Specifically designed to function in a wide range of environments the AMIGO has easy-access cabling and large unobstructed buttons which allow the operator to concentrat…
ACFM-7107 is a quadplexer that combines PCS and Cellular duplexers into a single miniature package. Its also features a single antenna connection, eliminating the need for antenna switching. The ACFM-7107 is designed with Avago Technologies' Film Bulk Acoustic Resonator (FBAR) technology. The ACFM-7107 also utilizes Avago's innovative Microcap bonded-wafer, chip scale packaging technology.
The ACPD Crack Microgauge MK IV, for laboratory use, is a rugged instrument with high stability and resolution.It is available with built in multiplexing as an option capable of extension to 128 channels and 4 output currents for monitoring multiple channels.The MK IV can be used with a manual low inductance probe for individual investigations or with an array of fixed or spot welded connections to check on surface or weld toe…
The CGM-7 is a modern microprocessor based instrument for measuring crack depth in metalsundergoing materials testing. Building on the success of the CGM-5R this unit improves upon theCGM-5R specification by offering two channel operation, higher frequency and current outputs, fullcomputer control and a variety of expansion options.It utilises the alternating current potential drop method (ACPD) which is an established techniq…
The FTA Reversing DC Potential Drop System has been designed by Keith Donald to provide the precise current and amplifier stability necessary for the reversing DC potential drop method of monitoring crack size. Custom-manufactured at FTA’s facility, the system is intended to be used in conjunction with the FTA Adwin-Gold Fatigue Crack Growth Rate data acquisition and control testing software, which synchronizes current reversi…
The Digital Barkausen Noise Analyzer - Rollscan 300 - is a fast, easy and reliable way to improve product quality.Rollscan 300 saves on material and labor expensesRollscan 300 is a digital Barkhausen noise analyzer. It is designed for surface quality control and testing of near-surface defects such as grinding burns, involving changes in stress and microstructure in a wide variety of ferritic steel and other ferromagnetic mate…
General purpose sensors are suitable for contact or non-contact testing of flat, concave, convex and irregularly shaped surfaces. Available for all analyzer models.
A range of Magnetic Particle Materials including wet and dry method powders and speciality products.
The FloormapVS2i floor scanner is a computerised MFL system designed to detect, size and map underfloor corrosion on above ground storage tanks. The FloormapVS2i is the best selling magnetic flux leakage (MFL) floor scanner and comes with up-graded magnets to improve corrosion detectability and sizing on thicker materials, faster data capture with a custom designed micro controller and all new software. The VS2i contains signi…
MPF is a magnetic particle suspension fluid designed for wet method magnetic particle inspection requiring a fluid with a flash point over 200F, low viscosity (less than 5.0cs), no odor, no fluorescence, and no yellow color. MPF has a low sulfur and halogen content.
Application• Non-destructive inspection of carbon steel, copper, brass, cupro-nickel, ferritic and other alloys• For tube inside diameter 0.250 inch (6.35mm) and up• Common usage includes boiler tubes, heat exchanger tubes, and storage tank roofs, floors, walls• Used in power generation, oil and gas, pulp and paper, and petro-chemical plants• Supports T4 + Saturn techniques for finned tubes• Small and large bore applicat…
Zet@Master is the powerful stand alone equipment of CMS Zet@ range in eddy current testing method. Multi channel and multi frequency, it allows the connection of several EC systems with only one unit to work in all configurations, on line or off line. It is able to drive several lines simultaneously. Deduced for flaws detection on tubes (welded or not), wires, bars, strip and automotive parts, made of austenitic, ferrous and n…
